Contec CPSN-DO-08BRL Reference guide

Type
Reference guide

This manual is also suitable for

Reference Manual
(Hardware)
CONTENTS
Digital Output Module Source Type
CPSN-DO-08RL
Digital Output Module Source Type, Built-in power supply
CPSN-DO-08BRL
Introduction .................................................................. 4
Safety Precautions .................................................... 10
Product Nomenclature and Function ............... 16
Installation ................................................................... 20
Appendix ...................................................................... 31
Optional Products .................................................... 36
Customer Support and Inquiry ............................ 38
2
Table of Contents
Introduction ....................................................................... 4
1. Related Manuals ......................................................................................................................................................5
2. Check the Firmware Version ...............................................................................................................................6
3. About the Product ..................................................................................................................................................7
4. Features ......................................................................................................................................................................8
5. Product Configuration List ..................................................................................................................................9
Safety Precautions ........................................................... 10
1. Safety Information ............................................................................................................................................... 11
2. Handling Precautions ......................................................................................................................................... 12
1. FCC PART15 Subpart B Class A Notice .................................................................................................. 15
2. CE EMC Directive Class A Notice ............................................................................................................ 15
Product Nomenclature and Function ............................ 16
1. Nomenclature of Product Components ..................................................................................................... 17
2. Description of Product Components ........................................................................................................... 18
1. LED Indicator ................................................................................................................................................... 18
2. Interface Connector ..................................................................................................................................... 19
Installation ........................................................................ 20
1. Install the Product ............................................................................................................................................... 21
1. Installation Conditions ................................................................................................................................ 21
2. Installation and Removal of I/O Module and Blank Panels .......................................................... 24
2. Derating ................................................................................................................................................................... 26
1. Derating By Way of the Output Current .............................................................................................. 26
3. Connecting to an External Device ................................................................................................................. 27
4. Cable Connection ................................................................................................................................................ 28
1. Digital Output ................................................................................................................................................. 28
Appendix .......................................................................... 31
1. Specifications......................................................................................................................................................... 32
2. Physical Dimensions ........................................................................................................................................... 34
3. The Details of Model Name............................................................................................................................. 35
Optional Products ............................................................ 36
1. Optional Products................................................................................................................................................ 37
3
Table of Contents
Customer Support and Inquiry ...................................... 38
1. Services .................................................................................................................................................................... 39
4
Introduction
This section provides necessary information of the product
such as the outline, bundled items and manuals before
actual use.
Introduction
CPSN-DO-08RL, CPSN-DO-08BRL Reference Manual (Hardware)
5
1. Related Manuals
The manuals related to the product are listed below.
Read them as necessary along with this document.
Must Read the Following Manuals.
Name
Purpose
Contents
How to get
Product Guide
Must read this after opening the
package.
This lists the product configuration
and describes the precautions.
Included in the package
(Printed matter)
Reference Manual for I/O
Module (Hardware)
Read this when operating the
I/O module with CPU Unit.
This describes the hardware aspects
such as functions and settings of the
I/O module.
Download from
the Contec
website (PDF)
CPU unit Reference
Manual (Hardware)
Read this when operating the
product.
This describes the hardware aspects
such as functions and settings.
Download from
the Contec
website (PDF)
CPU unit Reference
Manual (Software)
Read this when setting up the
"CONPROSYS nano WEB
Setting"
This describes how to set each
function of "CONPROSYS nano WEB
Setting".
Download from
the Contec
website (PDF)
Download Manuals
Download the manuals accordingly from the following URL.
https://www.contec.com/download/
Introduction
CPSN-DO-08RL, CPSN-DO-08BRL Reference Manual (Hardware)
6
2. Check the Firmware Version
Before start using the product, visit our website to check the firmware version and update to the
latest one if necessary.
Updating firmware to the latest version will resolve troubles and stabilize the operation.
https://www.contec.com/download/
Refer to the "Reference Manual (Software)" for the details of the firmware updating.
Introduction
CPSN-DO-08RL, CPSN-DO-08BRL Reference Manual (Hardware)
7
3. About the Product
This product is an expansion I/O module that adds a digital output interface to the CPU unit of the
CONPROSYS nano series.
The CPSN-DO-08RL contains 8 channels of opto-coupler isolated output (current source type) whose
response speed is 200µsec or less. This product can also be used with an external circuit power supply
of 12 to 24 V.
The CPSN-DO-08BRL contains 8 channels of opto-coupler isolated output (current source type)
whose response speed is 200µsec or less.
This products internal circuit also has a built-in power supply, so no external circuit power supply is
necessary.
Introduction
CPSN-DO-08RL, CPSN-DO-08BRL Reference Manual (Hardware)
8
4. Features
Opto-coupler isolated Output
This product contains 8 channels of opto-coupler isolated output (current source type) whose response speed is 200µsec or less.
Internal circuit power supply (CPSN-DO-08BRL only)
The CPSN-DO-08BRL s internal circuit has a built-in power supply, so no external circuit power supply is necessary.
Output circuits include zener diodes for surge voltage
protection.
Zener diodes are connected to the output circuits to protect against surge voltages.
The rated output of the CPSN-DO-08RL is 26.4VDC to the maximum, 500mA per channel.
The rated output of the CPSN-DO-08BRL is 12VDC, 56mA to the maximum (the total value of all output channels)
Easy installation and removal
This product can be installed in and removed from the CPU unit without any tools.
Adaptable to a wide range of temperature between -20
and +60°C
The product is capable of operating in the temperature between -20 and + 60°C. It can be installed in the various environments.
Equipped with the LED for an operation check
The product has the LED for an operation check, which helps you visually confirm the communication status of each interface.
No electrolytic capacitor
Without an electrolytic capacitor, which has a limited life, we are creating the product with a longer life.
Introduction
CPSN-DO-08RL, CPSN-DO-08BRL Reference Manual (Hardware)
9
5. Product Configuration List
The product consists of the items listed below.
Check, with the following list, that your package is complete.
If you discover damaged or missing items, contact your retailer.
Product…1
10-pin Connector
(attached to the
product)…1
Product Guide & Warranty
Certificate…1
Serial Number Label…1
10
Safety Precautions
Understand the following definitions and precautions to
use the product safely.
Never fail to read them before using the product.
Safety Precautions
CPSN-DO-08RL, CPSN-DO-08BRL Reference Manual (Hardware)
11
1. Safety Information
This document provides safety information using the following symbols to prevent accidents
resulting in injury or death and the destruction of equipment and resources.
Understand the meanings of these labels to operate the equipment safely.
DANGER
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING
WARNING indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not
avoided, may result in minor or moderate injury or in property damage.
Safety Precautions
CPSN-DO-08RL, CPSN-DO-08BRL Reference Manual (Hardware)
12
2. Handling Precautions
DANGER
Do not use the product in locations exposed to a flammable or corrosive gas. It may cause
explosion, fire, electrical shock, or malfunction.
Do not allow the device to come into contact with foreign substances (metal particles,
flammable substances, liquids, etc.) Otherwise, it can cause fire or electrical shock.
Do not place the product in an unstable location or use incomplete mountings. Otherwise, it
may cause the device to fall.
Be sure to connect the product to the stipulated power supply voltage. Connecting to a
different voltage might cause a fire or electrical shock.
If the product is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
The product is not intended for use in aerospace, space, nuclear power, medical equipment,
or other applications that require a very high level of reliability. Do not use the product in
such applications.
If using the product in applications where safety is critical such as in railways, automotive, or
disaster prevention or security systems, please contact your retailer.
CAUTION
Be certain the following requirements are satisfied when using the product.
- Indoor use
- Altitude up to 5000m
- Applicable POLLUTION DEGREE 2
When using the product at high altitudes, refer to the relational expression below to find an
appropriate ambient temperature. The heat dissipation decreases due to air pressure drop
and could lead to damages or a shorter product life.
- Ambient temperature = 60[°C] - 0.005 x altitude [m]
An Example)
The product is used at 3000 meters
60°C - (0.005 x 3000m) = 45°C (Ambient temperature)
Do not use or store the product in a location exposed to extremely high or low temperature
that exceeds range of specification or susceptible to rapid temperature changes.
e.g. - Exposure to direct sun
- In the vicinity of a heat source
Safety Precautions
CPSN-DO-08RL, CPSN-DO-08BRL Reference Manual (Hardware)
13
Do not use the product in extremely humid or dusty locations. It is extremely dangerous to
use the product with its interior penetrated by water or any other fluid or conductive dust. If
the product must be used in such an environment, install it on a dust-proof control panel, for
example.
Avoid using or storing the product in locations subject to shock or vibration that exceeds
range of specification.
When transporting the product, take suitable measures to avoid applying shock or vibration
directly to the product.
This product conforms to JIS Z0200: 1999 and JIS Z0232: 2004.
Use the product in the specified operating condition (temperature, humidity, vibration and
shock).
Avoid installing in the place where ventilation of the product may compromise. Insufficient
aeration could heat up the product and lead to malfunctions or damages.
Do not use the product in the vicinity of devices that generate strong magnetic force or noise.
Such products will cause the product to malfunction (stop, reboot).
Do not use or store the product in the presence of chemicals.
When removing connectors or cables, always unplug the power cables of the CPU unit first,
and confirm the LEDs are turned off.
Do not modify the product. CONTEC will bear no responsibility for any problems, etc.,
resulting from modifying the product.
In the event of failure or abnormality (foul smells or excessive heat generation), unplug the
power cables of the CPU unit immediately and contact your retailer.
Use a grounded, shielded cable to connect with peripherals.
To clean the product, wipe it gently with a soft cloth dampened with either water or mild
detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent
the paint to be scraped or discolored.
When connecting connectors, first check the shapes of connectors, and then insert them in
the correct orientation. After they are connected, do not put too much load on the connected
part. Doing so may result in poor contact or damage to the product and the connected part.
Do not touch metal parts or terminals with your hands when the product is in operation.
Otherwise, the product may malfunction, or cause failure.
Do not touch the front panels with your hands when the product is in operation. Otherwise,
the product may malfunction or cause failure.
Do not touch the product or connectors with a wet hand to avoid electric shock.
The specifications of the product are subject to change without notice for enhancement and
quality improvement. Even when using the product continuously, be sure to read the manual
in the CONTECs website and understand the contents.
When the product is used in a place that is affected by overcurrent or overvoltage (lightning
surge), select appropriate surge protection device for all of the route (Signal line, Power line,
Earth etc.). Consult with the specialist regarding selecting, purchasing, and setting the surge
protection device.
Safety Precautions
CPSN-DO-08RL, CPSN-DO-08BRL Reference Manual (Hardware)
14
The product is an open-type device (a device designed to be housed inside other equipment)
and must always be mounted inside a mechanical enclosure having enough strength.
Do not strike or bend this product. Otherwise, this product may malfunction, overheat, cause
a failure or breakage.
Do not touch this products metal plated terminals (edge connector) with yo ur hands.
Otherwise, this product may malfunction, overheat, or cause a failure.
If the terminals are touched by someones hands, clean the terminals with industrial alcohol.
Use the product in accordance with the described installing method, conditions, and
specifications. If the product is used outside the specified range, the protection performance
of this product will be impaired.
When disposing of the product, follow the disposal procedures stipulated under the relevant
laws and municipal ordinances.
Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(Including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
Safety Precautions
CPSN-DO-08RL, CPSN-DO-08BRL Reference Manual (Hardware)
15
1. FCC PART15 Subpart B Class A Notice
NOTE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance
could void the users authority to operate the equipment.
2. CE EMC Directive Class A Notice
EN55032Class A Notice
Warning:
Operation of this equipment in a residential environment could cause radio interference.
16
Product Nomenclature
and Function
This section describes product component names and their
functions, pin assignment of each connector.
Product Nomenclature and Function
CPSN-DO-08RL, CPSN-DO-08BRL Reference Manual (Hardware)
17
1. Nomenclature of Product Components
Component names of the product are shown in the figure below.
No.
Name
Function
1
LED Indicator
Displays the digital output status.
2
Interface Connector
This is a connector for digital output. Use the 10-pin connector, included in the
package.
Product Nomenclature and Function
CPSN-DO-08RL, CPSN-DO-08BRL Reference Manual (Hardware)
18
2. Description of Product Components
Components such as connectors, switches are described.
1. LED Indicator
When all the digital outputs are OFF, the LEDs all turn off. The hexadecimal value (0x00) can be
obtained with the software. When all the digital outputs are ON, the LEDs all turn on. The hexadecimal
value (0xFF) can be obtained with the software. The lowest-order bit corresponds to DO0, and the
highest-order bit corresponds to DO7.
The meaning of each LED is described below.
Color and Description
LED
Color
Display
Description
DO0 - DO7
Green
ON
It lights up upon outputting.
OFF
It indicates there is no outputting.
Product Nomenclature and Function
CPSN-DO-08RL, CPSN-DO-08BRL Reference Manual (Hardware)
19
2. Interface Connector
This product has 8 channels of digital output. Use the 10-pin connector included in the package.
Connector type: DEGSON 15EDGKC-3.81-10P-13
PHOENIX CONTACT FRONT-MC1.5/10-ST-3.81 (or equivalent)
Pin Assignment
Pin No.
Signal Name
Description
1 PCOM
This connects the positive-side of the external power. It shares with 8 channels of
output signal (DO0 - DO7).
2 MCOM
This connects the negative-side of the external power. It shares with 8 channels of
output signal (DO0 - DO7).
3 - 10
DO0 - DO7
This indicates the output signals. It connects the input signals from the other devices.
20
Installation
This section describes how to mount the product on a DIN
rail or the wall, and to connect to an external device with a
cable.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41

Contec CPSN-DO-08BRL Reference guide

Type
Reference guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI