1 FX-AC052
AC-DC Power Adaptor (5VDC, 2A)
FX-AC052 User’s Guide
CONTEC CO.,LTD.
This product is the AC adapter for input: 100 - 240VAC and output: +5VDC 2A.
Dimensions
[mm]
Specifications
Parameter Requirement description
Input voltage range *1 100 - 240VAC 50Hz/60Hz
Rated input current
AC400mA (100VAC,50Hz, at maximum load)
Frequency 47 - 63Hz
Rated output voltage 5.0VDC (at the time of 0A - 2.0A)
Rated output current 2.0A (Max.)
Operating temperature 0 - 40°C
Storage temperature 20 - 80%RH (No condensation)
Floating dust particles Not to be excessive
Corrosive gases None
Physical dimensions(mm) 50(W) x 78(D) x 30(H) (Not including the cable and protrusions)
Weight 157g
*1 The bundled AC cable is for 125VAC.
At the time of the use in Japan, become 100-125V.
FIAJ RC5320
No.2 L TYPE
1830 ± 50
1828.8
Min.
FX-AC052 User’s Guide
Copyright 2011 CONTEC CO., LTD. ALL RIGHTS RESERVED.
CONTEC CO., LTD. October 2012 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/ NA01727 (LYNN322)
Chinese http://www.contec.com.cn/ 10312012_rev2 [11162011]
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
Storage・Disposal
When storing this product, keep it in its original packing form.
When disposing of the product, follow the disposal procedures stipulated under the relevant laws and
municipal ordinances.
Handling Precautions
DANGER
Do not use the product where it is exposed to flammable or corrosive gas. Doing so may result in
an explosion, fire, electric shock, or failure.
CAUTION
-
This product must not be used in locations subject to physical shock or strong vibration. Otherwise,
the board may malfunction, overheat, or cause a failure.
-
Do not use or store this device in high temperature or low temperature surroundings, or do not expose
it to extreme temperature changes. Otherwise, the board may malfunction, overheat, or cause a
failure.
-
Do not use or store this device where it is exposed to direct sunlight or near stoves or other sources of
heat. Otherwise, the board may malfunction, overheat, or cause a failure.
-
Do not use or store this device near strong magnetic fields or devices emitting electromagnetic
radiation. Otherwise, the board may malfunction, overheat, or cause a failure.
-
If an unusual smell or overheat is noticed, unplug a wall outlet immediately.
-
Do not block it up around this product on top of this product or on its sides.
-
The specifications of this product are subject to change without notice for enhancement and quality
improvement. Even when using the product continuously, be sure to read the manual and
understand the contents.
-
Do not attempt to modify this device. The manufacturer will bear no responsibility whatsoever for
the device if it has been modified.
-
Do not rotate or vibrate the DC plug from this product to an apparatus after power supply.
-
Do not modify this product. CONTEC will bear no responsibility for any problems, etc., resulting
from modifying this product.
-
Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Contec FXA2000-G Owner's manual
-
Contec FX-AC053 Owner's manual
-
-
-
-
-
-
-
-