App 3
The following quick guide explains how to connect your CASO product to the CASO app,
allowing you to use it to control the product.
To set up the connection you will require a stable Wi-Fi network which should not be
switched off after set-up as this will break the connection to the CASO product.
1. Before you begin, download the CASO app from the app store and set up a CASO
account.
2. Switch on your CASO product fully.
3. Open the CASO app and press the “Add device” button
4. Press the pairing button combination on your CASO product, as shown in the CASO
app.
o Press the Power and Light buttons simultaneously until the CASO product
beeps.
5. Let go of the buttons as soon as you hear the beeping sound.
o After approx. 5-10 seconds a four-digit code (pairing code) will appear in the
display (consecutively / simultaneously in both displays). This code will be
displayed for 3 minutes.
(Example)
o You can remove the pairing code from the display at any time by pressing the
“Light” button.
6. Click “Continue” in the CASO app.
o After that, the search for new CASO products will start.
o If no new CASO product is found, the notification “No new devices found” will
appear. Please confirm by clicking “OK” and repeat the steps described in
this quick guide, starting with Step 3.
7. Following this, select a new CASO product in the CASO app.
o You will be asked to enter the pairing code (4-digit code shown on the
device’s display).
