Procom PF09B Installation guide

Installation of Base Stand

Before installing heater to base, please make sure you have

a hardware packet that contains the following items:

2 - Base Feet

4 - Sheet Metal Screws

1. Carefully lay heater on its back on a table with the bottom

of the heater extending outside the table edge.

2. Attach base feet to heater using sheet metal screws.

Base Feet

Sheet Metal Screws

200023-01

Rev A

02/13

ProCom Heating, Inc.

Bowling Green, KY 42101

www.usaprocom.com

1-866-573-0674

This manual is also suitable for

Download PDF