Volkswagen Passat 2013 Owner's manual

Side view

Fig. 1 Vehicle side overview.

Key to fig. 1:

(1) Fuel filler flap

(2) Roof antenna

(3) Outside door handles

(4) Outside mirror

– Additional turn signal light

(5) Lift points for the jack

Front view

Fig. 2 Vehicle front overview.

Key to fig. 2:

(1) Front windshield

(2) Windshield wipers

(3) Engine hood

(4) Engine hood release

(5) Headlights

(6) Fog lights / static cornering lights

(7) Front license plate bracket

(8) Sensor on mirror base for:

– Low-light sensor

Rear view

Fig. 3 Vehicle rear overview.

Key to fig. 3:

(1) Roof antenna

(2) High-mounted brake light

(3) Rear window

– Rear window defroster

(4) Luggage compartment release

(5) Taillights

(6) Rear license plate bracket

(7) Luggage compartment lid

(8) License plate lights

Driver door overview

Fig. 4 Overview of controls in the driver door.

Key to fig. 4:

(1) Indicator for power locking system

(2) Door handle

(3) Power locking switch for locking and unlocking the vehicle   

(4) Switch for adjusting the outside mirror

– Adjusting outside mirrors     

– Outside mirror heating 

(5) Buttons for operating the power windows

– Power windows 

– Safety switch for rear power windows 

(6) Lever for releasing the engine hood

(7) Luggage compartment release

(8) Bottle holder

(9) Storage compartment

Driver side overview

Fig. 5 Driver side overview.

Key to fig. 5:

(1) Headlight switch 

– Off position --

– Automatic headlight control --

– Low beams 

– Fog lights  (if applicable)

– Parking lights  (if applicable)

(2) Dimmer control for the instrument and switch illumination 

(3) Lever for

– High beams 

– Headlight flasher 

– Turn signals 

– Cruise Control System (CCS)  –  –  – /+ – /-

(4) Multi-function steering wheel controls

– Volume setting for radio, navigation system notifications, or telephone calls (if applicable)

 – 

– Mute switching for radio or activation of voice control (if applicable) 

– Display Phone main menu or accept telephone calls 

– Audio, Navigation   

– Control switches for the Volkswagen Information System (Premium version) #     

∃, , 

(5) Air vents 

   

(6) Instrument cluster:

– Instruments

– Display

– Warning and indicator lights

(7) Windshield wiper and washer lever

– Windshield wiper  – – 

– Intermittent operation for windshield wipers 

– “One-tap wiping” x

– Windshield wiper 

– Automatic wipe/wash for windshield 

– Lever with buttons for the Volkswagen Information System (Basic version) - , / 24

(8) Ignition switch (vehicles without Keyless Access)

(9) Starter button (vehicles with Keyless Access locking and starting system)

(10) Pedals

(11) Driver front airbag

(12) Lever for adjustable steering wheel

(13) Horn (only works when the ignition is switched on)

(14) Storage compartment

Upper center console

Fig. 6 Overview of the upper center console.

Key to fig. 6:

(1) Switch for emergency flashers

>

(2) Analog clock

(3) Radio or Radio & Navigation system (factory-installed) ⇒ Booklet

Radio

or ⇒ Booklet

Navigation system

(4) Controls for:

– Manual AC

– Climatronic

(5) Passenger seat heating switch 

(6) PASSENGER AIR BAG   light (front airbag for front seat passenger)

(7) Driver seat heating switch 

(8) Air vents

Lower center console

Fig. 7 Overview of the lower center console.

Key to fig. 7:

(1) Levers for:

– Manual transmission

– Automatic transmission

(2) Storage compartment:

– with 12 Volt socket

– or with cigarette lighter

(3) Cup holder in the center console

(4) Storage compartment in the center armrest

– Multimedia jack (MEDIA-IN) ⇒ Booklet

Radio

or ⇒ Booklet

Navigation system

– with AUX-IN jack ⇒ Booklet

Radio

or ⇒ Booklet

Navigation system

– with 12 Volt socket

– There may be a small removable tray at the back of the storage compartment.

(5) Parking brake lever

(6) Starter button for Keyless Access locking and starting system

Applicable only in the United States, Canada, Mexico, and the AGCC

Front passenger side overview

Fig. 8 Overview of the front passenger side.

Key to fig. 8:

(1) Inside the glove compartment: SET button for Tire Pressure Monitoring System  

(2) Opening handle for the lockable glove compartment

(3) Passenger front airbag location in the instrument panel (approximate)

(4) Air vent     

(5) Inside the glove compartment: Button for Valet Parking feature

Applicable only in South Korea

Front passenger side overview

Fig. 9 Overview of the front passenger side.

Key to ⇒ fig. 9:

(1) Inside the glove compartment: SET button for Tire Pressure Monitoring System  

(2) Opening handle for the lockable glove compartment

(3) Passenger front airbag location in the instrument panel (approximate)

(4) Air vent     

Applicable only in the United States and Canada

Symbols on the roof console and sun visor

Symbol Meaning

    

Interior and reading lights

  

Power sunroof

1 2 3

HomeLink

®

Universal Transmitter

Applicable only in Mexico and AGCC

Symbols on the roof console and sun visor

Symbol Meaning

    

Interior and reading lights

  

Power sunroof

1 2 3

Garage door opener

Applicable only in South Korea

Symbols on the roof console

Symbol Meaning

    

Interior and reading lights

  

Power sunroof

Applicable only in the United States

Instrument overview

Fig. 10 Instrument cluster in the instrument panel.

 Please first read and note the introductory information and heed the WARNINGS

Instrument explanations

(1) Button for setting the instrument cluster clock, the Radio or Radio & Navigation system

clock, and the analog clock

1

.

– With the ignition on, push the 

/

 button to highlight the hour or the minutes in the clock

display.

– To advance the clock, push the 0.0 / SET button

(7). Press and hold the button to fast for-

ward.

– Push the 

/

 button again to finish setting the clock.

(2) Tachometer (shows engine revolutions per minute in thousands when the engine is running).

The red zone at the end of the scale indicates maximum permissible engine rpm (revolutions

per minute) for all gears after the break-in period. Before reaching the red zone, select the next

higher gear or selector level position D, or ease your foot off the accelerator ⇒

.

(3) Engine coolant temperature display 

(4) Displays

(5) Fuel gauge

(6) Speedometer.

(7) Reset button for the trip odometer display (trip).

– Push the 0.0 / SET button in order to reset to zero.

NOTICE

 To help prevent engine damage, always avoid high engine speeds, full throttle acceleration

and heavy engine loads when the engine is cold.

 To help prevent engine damage, the tachometer needle should only enter the red zone

(warning zone) briefly.

Upshifting early into the next higher gear saves fuel and reduces engine noise.

1

On appropriately equipped vehicles, the clocks can also be set via the

Settings menu in the instrument cluster display

Applicable only in Canada, Mexico, the AGCC, and South Korea

Instrument overview

Fig. 11 Instrument cluster in the instrument panel.

 Please first read and note the introductory information and heed the WARNINGS

Instrument explanations ⇒ fig. 11:

(1) Button for setting the instrument cluster clock, the Radio or Radio & Navigation system

clock, and the analog clock

2

.

– With the ignition on, push the 

/

 button to highlight the hour or the minutes in the clock

display.

– To advance the clock, push the 0.0 / SET button

(7). Press and hold the button to fast for-

ward.

– Push the 

/

 button again to finish setting the clock.

(2) Tachometer (shows engine revolutions per minute in thousands when the engine is running).

The red zone at the end of the scale indicates maximum permissible engine rpm (revolutions

per minute) for all gears after the break-in period. Before reaching the red zone, select the next

higher gear or selector level position D, or ease your foot off the accelerator ⇒

.

(3) Engine coolant temperature display 

(4) Displays

(5) Fuel gauge

(6) Speedometer.

(7) Reset button for the trip odometer display (trip).

– Push the 0.0 / SET button in order to reset to zero.

NOTICE

 To help prevent engine damage, always avoid high engine speeds, full throttle acceleration

and heavy engine loads when the engine is cold.

 To help prevent engine damage, the tachometer needle should only enter the red zone

(warning zone) briefly.

Upshifting early into the next higher gear saves fuel and reduces engine noise.

2

On appropriately equipped vehicles, the clocks can also be set via the

Settings menu in the instrument cluster display

Displays

Fig. 12 In the instrument cluster display: A: Open engine hood, B: Open luggage compartment lid, C: Open

front driver side door, D: Open rear passenger side door.

 Please first read and note the introductory information and heed the WARNINGS

Depending on the vehicle model, different information may be shown in the instrument cluster display

 Warning and information texts

 Odometer displays

 Time

 Outside temperature

 Compass display

 Open door, engine hood, or luggage compartment lid

 AdBlue

®

information

 Selector lever position

 Multi-Function Indicator (MFI) and menus for different settings

 Service reminder display

 Alternative speed display (Settings menu)

Applicable only in the United States, Canada, Mexico, and the AGCC

Compass

Fig. 13 Compass zones.

 Please first read and note the introductory information and heed the WARNINGS

The compass does not need to be calibrated in vehicles with a factory-installed navigation system.

There is no Compass menu item in this case.

On vehicles without a factory-installed navigation system that have the Premium instrument cluster,

the compass is calibrated automatically. If electrical or metallic accessories are added to the vehicle,

the compass must be recalibrated.

Adjusting the compass zone

 Switch on the ignition.

 Select the Settings menu followed by the Compass and Zone menu items.

 Select the compass zone according to the current location ⇒

fig. 13.

 Adjust and confirm compass zone (1-15) by using the arrow buttons.

Calibrating the compass

In order to calibrate the compass, you need a valid compass zone for the location and enough room to

drive in a circle.

 Switch on the ignition.

 Select the Settings menu followed by the Compass and Calibration menu items.

 Confirm the Please drive a full circle to calibrate message by pressing the OK

button on the multi-function steering wheel, and then drive in a complete circle at about 6 mph

(10 km/h).

During calibration, CAL is shown in the instrument cluster display. The calibration is complete when

the compass direction is displayed.

Service reminder display

 Please first read and note the introductory information and heed the WARNINGS

The service appointment reminder is shown in the instrument cluster display ⇒

fig. 10 (4), ⇒ fig. 11 (4).

For information on maintenance intervals, please see the ⇒ Booklet

Warranty and Maintenance

.

For vehicles with time- or distance driven-dependent service, only fixed service intervals are dis-

played.

Service reminder

If service is due in the near future, a service reminder is displayed when the ignition is switched on.

On vehicles without text messages (Basic instrument cluster), a wrench symbol  and a miles

(kilometers) indicator are shown in the instrument cluster display. The distance shown in miles

(kilometers) is the maximum distance the vehicle can be driven without having a service completed.

The display changes after a few seconds. A clock symbol is displayed and the number of days until

the required service is shown.

On vehicles with text messages (Premium instrument cluster), Service in --- mi or --- days

(Service in --- km or --- days) is shown in the instrument cluster display.

Service event

When service is due, a warning chime sounds when the ignition is switched on, and a flashing

wrench symbol  is displayed for several seconds. For vehicles with text messages, Service now

is indicated in the instrument cluster display.

Viewing service message

The current service message can be accessed when the ignition is switched on, the engine is

switched off, and the vehicle is stopped:

 Push the 

/

 button in the instrument cluster several times until the wrench symbol  ap-

pears.

 OR: Select the Settings menu.

 In the Service submenu, select the Info menu item.

A minus sign in front of the number of miles (kilometers) or days means that service is overdue. On

vehicles with Premium text message display, Service since --- mi or --- days (Service

since --- km or --- days) is shown in the instrument cluster display, when service is overdue.

Resetting the service reminder display

If the service was not performed by an authorized Volkswagen dealer or an authorized Volkswagen

Service Facility, the service reminder can be reset as follows:

Vehicles with Premium text message display:

Select the Settings menu.

In the Service submenu, select the Reset menu item.

Confirm request with the OK button on the multi-function steering wheel.

Vehicles with Basic text message display:

Switch off the ignition.

Push the 0.0 / SET button in the instrument cluster and hold down.

Switch on the ignition.

Vehicles with Basic text message display:

Release the 0.0 / SET button and push the 

/

 button in the instru-

ment cluster within about 20 seconds.

Do not reset the service reminder between service intervals; otherwise incorrect information will

be displayed.

The service reminder disappears after a few seconds when the engine is running or the

OK

/

RESET

button on the windshield wiper lever or the OK button on the multi-function steering wheel has been

pushed.

Volkswagen Information System

 Introduction

In this section you’ll find information about:

Menu structure – overview (Basic version)

Menu structure – overview (Premium version)

Using the instrument cluster menus: Basic version

Using the instrument cluster menus: Premium version

Main menus: Premium version

MFI menu (Multi-Function Indicator): Premium version

Settings menu

Convenience submenu

Lights & Vision submenu

When the ignition is switched on, you can display different types of information in the instrument

cluster. The menu options vary depending on whether you have a Basic or Premium version of the

Volkswagen Information System. With the Premium instrument cluster display, you can also control

certain vehicle features.

Buttons on the windshield wiper lever operate the menus for Basic instrument cluster. The Premium

version has control buttons on the right side of the multi-function steering wheel.

The number of menus in the instrument cluster display depends on the electronics and equipment on

the vehicle.

An authorized Volkswagen dealer or an authorized Volkswagen Service Facility may be able to add or

modify functions depending on your vehicle's equipment.

Some menu items can only be accessed when the vehicle is not moving.

As long as a priority 1 warning message is displayed, no menus can be accessed on vehicles with the

Premium instrument cluster. In order to display menus, acknowledge the warning by pressing the OK

button on the multi-function steering wheel.

More information:

 Outside mirrors

 Driver assistance systems

 Radio or Navigation system ⇒ Booklet

Radio

or ⇒ Booklet

Navigation system

 Mobile phone package ⇒ Booklet

Mobile Phone Package

WARNING

Driving on today's roads demands the full attention of the driver at all times. Driver distrac-

tion causes accidents, collisions and serious personal injury!

 Never access menus when the vehicle is moving.

Emergency starting and starting the engine with a very weak vehicle battery or after the vehicle

battery has been replaced may change or delete settings (including time, date, personal convenience

settings and programming). Check the settings and correct as necessary once the vehicle battery has

built up a sufficient charge.

Applicable only in the United States

Menu structure – overview (Basic version)

 Please first read and note the introductory information and heed the WARNINGS

The instrument cluster display is divided into 3 parts. The time (digital clock) is displayed in the top

part. The bottom part contains the odometer and the trip odometer ("trip"). You can select the follow-

ing displays for the middle part:

 and fuel range estimate

xx miles (trip memory 1 and 2)

ø --- mph (average speed)

¢

(speed warning)

--°F (outside temperature)

Travel time

--- mpg (current fuel consumption)

ø --- mpg (average fuel consumption)

Applicable only in Canada, Mexico, the AGCC, and South Korea

Menu structure – overview (Basic version)

 Please first read and note the introductory information and heed the WARNINGS

The instrument cluster display is divided into 3 parts. The time (digital clock) is displayed in the top

part. The bottom part contains the odometer and the trip odometer ("trip"). You can select the follow-

ing displays for the middle part:

 and fuel range estimate

xx km (trip memory 1 and 2)

ø --- km/h (average speed)

 (speed warning)

Outside temperature

Travel time

--- l/100 km (current fuel consumption)

ø --- l/100 km (average fuel consumption)

Applicable only in the United States

Menu structure – overview (Premium version)

 Please first read and note the introductory information and heed the WARNINGS

The instrument cluster display is divided into 3 parts. The time (digital clock) is displayed in the top

part. The bottom part contains the odometer and the trip odometer ("trip"). You can select the follow-

ing displays for the middle part:

Multi-Function Indicator (MFI)

▪ Travel time

▪ Consumption --.- mpg (current fuel consumption)

▪ Av. consumption --.- mpg (average fuel consumption)

▪ Range

~

(Diesel engines only: visible only when the AdBlue range has fallen to less than 1500 mi

or 2400 km)

▪ Route

▪ Average speed --- mph

▪ xx mph (digital speed display)

▪ Oil temp (oil temperature; 3.6 liter engine only)

▪ Speed warning --- mph

Audio

⇒ Booklet

Radio

or ⇒ Booklet

Navigation system

Navigation

⇒ Booklet

Navigation system

Phone

⇒ Booklet

Mobile Phone Package

Vehicle status

Settings

▪ Language

▪ MFI data

– Travel time

– Curr. consum. (current fuel consumption)

– Av. consum. (average fuel consumption)

– Range

– Route

– Av. speed

– Digit. speed (digital speed display)

– Oil temp. (oil temperature; 3.6 liter engine only)

– Speed warn. (speed warning)

– Back

▪ Compass (vehicles without navigation system)

▪ Convenience

– ATA confirm

– Central locking

Auto unlock

Unlock doors

Back

– Window op. (window operation)

Off

All

Driver

Back

Page is loading ...

Volkswagen Passat 2013, 2013 Passat Owner's manual

Related papers

Other documents