CONTENTS
1 Cover, duct
8 Screw, #8 x 1/2"
6 Screw, #10 x 2"
PRO WALL HOOD DUCT COVER INSTALLATION
1
Install the ventilation hood using the instructions
provided with the hood.
2
For indoor hoods only, remove and discard the existing
screws from the top of the hood.
3
Place the duct cover on the hood.
4
Loosely install eight #8 x 1/2" screws.
5
Verify the duct cover alignment, then tighten the
screws.
6
If accessible, use the six additional screws to secure
the top of the duct cover to an upper cabinet or soffit.
Pro Wall Hood Duct Cover Installation
wolfappliance.com 800.222.7820
9012825 REV-B 11/2018
Page 1 of 1
*9012825$REVB*
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI