Bowflex Treadmill 25, Treadmill, Treadmill 56 User manual

  • Hello! I am an AI chatbot trained to assist you with the Bowflex Treadmill 25 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Revised Assembly Steps 1 and 7 for the
Bowfl ex
Treadmill 10 / Treadmill 22 / Treadmill 25 / Treadmill 56
Addendum
This addendum provides instructions to properly attach the Uprights and Outer Junction Covers to the Bowfl ex
Treadmill 10 / Treadmill 22 / Treadmill 25 / Treadmill 56.
If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside US/Canada). To fi nd your local
distributor, go to: www.nautilusinternational.com
Refer to the Assembly Manual for complete safety instructions.
8028033.111520.A
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand
all Warnings on this machine.
Nautilus, Inc., www.NautilusInc.com, 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. - Customer Service: North America (800) 605-3369, [email protected] | outside U.S. www.nautilusinternational.com | Printed in
China | © 2020 Nautilus, Inc. | Bowfl ex and the B logo are trademarks owned or licensed by Nautilus, Inc., registered or otherwise protected by common law in the United States and other nations. |
ORIGINAL DOCUMENT
- ENGLISH VERSION ONLY
Assembly Step 1. Attach the Uprights to the Base Assembly, and then Connect the Cables from the Base Assembly to the
Right Upright
Note: Do not crimp cables. Do not fully tighten Hardware until instructed.
A
B
C
X6
2
E
#2
X2
Assembly Step 7. Attach the Base Shrouds and Outer Junction Covers to the Frame Assembly
Note: Be sure that the Right Base Shroud hides the Cable Connectors. If necessary, push the Cable further into the Right Upright.
/