13
• Do not store the USB MODEM in cold areas. When it warms up (to its normal temperature),
moisture can form inside, which may damage electronic circuit boards.
• Do not attempt to open the USB MODEM. Non-expert handling may damage it.
• Do not drop, knock, or shake the USB MODEM. Rough handling can break internal circuit
boards.
• Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the USB
MODEM.
• Do not paint the USB MODEM. Paint can prevent proper operation.
Use only the supplied antenna. Unauthorized antennas, modifi cations, or attachments could
damage the USB MODEM and may violate regulations governing radio devices.
All of the above suggestions apply equally to your USB MODEM or any accessory. If any of
them is not working properly, take it to your nearest qualifi ed service facility. The personnel
there will assist you and, if necessary, arrange for service.
Note : Modem Activation Password and Security password is “0000”
Important safety information