Helpline No. UK/Northern Ireland 00800 52323000 Rep. Ireland 00800 52323000
Web Support: [email protected]
Model Number: AE1-FW-10SN page 1
Radio Controlled LCD Wall Clock
AE1-FW-10SN
Operating instructions
Issue: July 2011
Table of Contents
1 Area of application.........................................................................1
2 Safety and maintenance.................................................................1
2.1 Safety instructions .................................................................1
2.2 Operating environment conditions.........................................1
2.3 Ambient temperature .............................................................1
2.4 Battery operation ...................................................................1
2.5 Disposal.................................................................................1
2.6 Cleaning and care ..................................................................1
2.7 Storage...................................................................................1
2.8 Information concerning these operating instructions.............1
2.9 Scope of delivery...................................................................1
3 Commissioning ...............................................................................1
4 Modes/functions .............................................................................1
4.1 Function buttons ....................................................................2
4.2 Time and date ........................................................................2
4.2.1 Radio controlled time..................................................2
4.2.2 Manual setting ............................................................2
4.2.3 12/24-hour format .......................................................2
4.2.4 Weekday display..........................................................2
4.2.5 Calendar week ............................................................2
4.2.6 Time zone ....................................................................2
4.3 Alarm time.............................................................................2
4.3.1 Setting the alarm .........................................................2
4.3.2 Activating/deactivating the alarm and alarm repeat
function .......................................................................2
4.3.3 Displaying the alarm time...........................................2
4.3.4 Switching off the alarm ...............................................2
4.4 Temperature display ..............................................................2
4.5 Moon phase ...........................................................................2
4.6 Technical specifications.........................................................2
5 Assembly .........................................................................................2
6 Changing the batteries...................................................................2
7 Declaration of conformity..............................................................2
8 Troubleshooting .............................................................................2
AFTER SALES SUPPORT
Now you have purchased an Ascot product rest assured in the knowledge
that as well as your 3 year parts and labour warranty you have the added
peace of mind of dedicated helplines and web support.
What your 3 Year Warranty means:
Great care has gone into the manufacture of this product and it should
therefore provide you with years of good service when used properly. In the
event of product failure within its intended use over the course of the first
3 years after date of purchase, we will remedy the problem as quickly as
possible once it has been brought to our attention. In the unlikely event of
such an occurrence, or if you require any information about the product,
please contact us via our helpline support services, details of which are to be
found both in this manual and on the product itself.
1 Area of application
This radio controlled wall clock is designed exclusively for use as a clock. It
is intended for private use and is not suitable for commercial purposes. Any
use other than that described in these operating instructions is not permitted
and can result in damage and injury. No liability will be accepted for claims
arising from improper use. Additional information and explanations can be
found in these operating instructions.
2 Safety and maintenance
2.1 Safety instructions
Please pay particular attention to this section and follow all of the
instructions provided. Doing so will ensure reliable operation. Keep the
packaging and operating instructions in a safe place so that they can be
transferred to the new owner if you decide to sell your radio controlled wall
clock. Never open the housing of the wall clock as there are no serviceable
parts inside (the exception to this is opening the battery compartment to
change the batteries, see section 6 "Changing the batteries"). Do not place
any items on top of the clock and do not exert any pressure on the display.
To prevent damage do not touch the display with any sharp objects.
2.2 Operating environment conditions
Make sure your clock is not exposed to continuous moisture and avoid dust,
heat and prolonged exposure to direct sunlight (particularly in a car). The
clock is protected against impact which can occur during normal, everyday
use. It is imperative that very strong magnetic fields (caused by e.g. electric
welding machines, transformers, etc.) are avoided as they may result in
deviations in time measurement. Electromagnetic or atmospheric
interference can also interfere with the radio signal.
2.3 Ambient temperature
Your clock can be operated continuously within an ambient temperature
range of 0° C to 50° C. It should only be exposed to temperatures ranging
from -10° C to 0° C for brief periods. If the batteries have been removed
(see section 6 "Changing the batteries"), you can store the clock at
temperatures ranging between -10° C and 50° C. The clock should be stored
safely. Avoid high temperatures and permanently damp environments.
2.4 Battery operation
Your radio controlled wall clock is operated by 2 x LR6/R6 / AA 1.5V
batteries.
The following section provides you with information about using batteries:
Never expose the batteries to excessive heat from direct sunlight, fire or
other such source as this increases the risk of leakage! Never recharge the
batteries. Do not disassemble or short-circuit the batteries - risk of
explosion! Keep batteries and the clock out of the reach of children.
Batteries can be swallowed by children. If this occurs, seek medical advice
immediately. Prevent leaking batteries from coming into contact with your
skin, eyes and mucous membranes. In the event of contact with battery fluid
rinse the affected areas immediately with plenty of water and seek medical
advice. Always replace all of the batteries at the same time. Ignoring this
information may result in damage and possibly even to the batteries
exploding. You can find information on replacing the batteries under section
6 "Changing the batteries".
2.5 Disposal
Batteries: Batteries are hazardous waste. Batteries can be
disposed of correctly by shops selling batteries and at local
authority waste departments where there are appropriate
containers.
Radio controlled wall clock:
If you wish to dispose of your radio
controlled wall clock, please adhere to the current regulations. Your local
authority waste department can provide you with the relevant information.
07/2011
KRIPPL-WATCHES Warenhandels GmbH
Maria-Theresia-Straße 41, 4600 Wels, Austria
Packaging: Dispose of the clock's packaging according to the current
regulations. Your local authority waste department can provide you with the
relevant information.
2.6 Cleaning and care
Only clean the clock using a soft, damp, lint-free cloth. Do not use any
solvents or abrasive or gaseous cleaning agents. Make sure drops of water
are not left to accumulate on the display. Water can cause long-term
discolouration. Do not expose the display to glaring sunlight or ultra-violet
radiation.
Note! There are no components inside the clock's housing which require
maintenance or cleaning.
2.7 Storage
Remove the batteries if you do not intend using the radio controlled wall
clock for a prolonged period. When storing the clock please observe the
information included under section 2.2 "Operating environment conditions"
and section 2.3 "Ambient temperature".
2.8 Information concerning these operating
instructions
We have arranged these operating instructions in such a way that you can
locate the relevant information by using the Table of Contents. Additional
assistance for your clock can be obtained by browsing our FAQs (frequently
asked questions), which can be accessed online via our product service page
(http://www.produktservice.info) EAN Code: 25072518
2.9 Scope of delivery
1 x radio controlled wall clock AE1-FW-10SN, 1 x set of operating
instructions, 1 x warranty card, 1 x warranty sticker, 2 x LR6/R6 / AA 1.5V
batteries, 2 x feet
3 Commissioning
We recommend that you read the operating instructions thoroughly before
starting to use your radio controlled wall clock. Please pay particular
attention to section 4.1 "Function buttons" in order to become acquainted
with the clock.
1. The batteries have already been inserted into the battery compartment,
however the contacts are interrupted by a battery isolation strip. This
protrudes visibly between the battery compartment and the cover. You
can remove this strip without opening the battery compartment.
2. When you have removed the strip the LCD display will
illuminate, a brief audible tone will sound and the clock's
search procedure will start automatically, which is indicated
by flashing radio waves above the radio tower symbol.
Note! No other settings can be implemented during this period.
This process can take approx. 2 to 5 minutes. When the radio signal is
received the date, time and moon phase displays are set automatically. The
radio waves above the radio tower symbol are illuminated continuously.
As is the case with wireless signals for mobile telephones or radio/TV
reception, it is possible that your radio controlled wall clock will not always
receive a signal at every location. Here are some tips to ensure your clock
operates properly. The following factors can cause malfunctions:
•
•
Concrete buildings, metal components and electronic equipment.
•
•
Electronic devices such as TVs, computers, various household
appliances, transformers, power lines, radio transmitters or electrified
railway lines.
•
•
Atmospheric effects can also interfere with radio waves.
•
•
The distance of the radio signal and the geographic environment
(mountains, etc.). So-called "dead spots", which make reception
impossible, can occur anywhere.
•
•
Reception is better in rural areas in comparison to large cities. There
are fewer sources of interference at night compared to during the day.
Therefore reception is better at night.
•
•
Weak batteries in the clock will impair the quality of reception.
3. The radio signal is generally synchronised with the radio controlled
time within 2 to 5 minutes, after which the radio tower symbol appears
constantly in the display. If this does not occur, press and hold the
"+/ " button for approx. 3 seconds. The radio waves above the radio
tower symbol start to flash and another attempt is made to locate a
radio signal.
4. If it is not possible to receive a signal at your current location, you can
also set the time manually (see section 4.2.2 "Manual setting").
4 Modes/functions
•
•
Clock (hours, minutes, seconds), 12/24-hour display
•
•
Date (month, day), calendar week display
•
•
Weekday in 6 different languages (German, English, Dutch, French,
Spanish and Italian)
•
•
Temperature display (in ºC / ºF)
•
•
Alarm (weekday alarm, weekend alarm, appointment alarm)
•
•
Alarm repeat function
•
•
Automatic time adjustment and conversion from summer/winter time
•
•
Time zone setting
•
•
Moon phase
•
•
Suitable for table assembly and wall mounting
Helpline No. UK/Northern Ireland 00800 52323000 Rep. Ireland 00800 52323000
Web Support: [email protected]
Model Number: AE1-FW-10SN page 2
4.1 Function buttons
4.2 Time and date
4.2.1 Radio controlled time
The time is encoded (DCF77 - 1 hour preset) and broadcast by a long-wave
transmitter in Mainflingen near Frankfurt/Main over a transmission range of
some 1,500 km. If your clock is located within this transmission range it
will receive and convert this signal, thereby ensuring the precise time and
date is always displayed immaterial whether it's summer or winter time. If it
is not possible to receive a signal at your current location, you can also set
the time manually (see section 4.2.2 "Manual setting").
4.2.2 Manual setting
Note: To rapidly alter the digits press and hold the "+/ " or "–/C/F" button.
1. To set the time press and hold the "SET/ZONE" button for approx.
3 seconds until the language for the weekday display starts to flash. You
can choose to display the weekday in English (EN), Dutch (DU), French
(FR), Spanish (SP) Italian (IT) or German (GE) by pressing the
"+/ " or "-/C/F" button. Then press the "SET/ZONE" button to confirm
your selection; 24 Hr or 12 Hr now starts to flash.
2. Press the "+/ " or "-/C/F" button to alternate between the 12 and 24 hour
display and confirm your selection by pressing the "SET/ZONE" button.
The year now starts to flash.
3. Press the "+/
" or "-/C/F" button to set the year and confirm your
selection by pressing the "SET/ZONE" button. The month now starts to
flash.
4. Set the month, date, hour and minute in the same way. When the minute
entry has been confirmed the time zone flashes.
5. Press the "SET/ZONE" button to set time zone 0 for Central European
Time. To set other time zones (see section 4.2.6 "Time zone") press the
"+/
" or "-/C/F" button and confirm your selection by pressing the
"SET/ZONE" button.
6. ON
then flashes in the display and RC is displayed instead of the
weekday. You have the option of disabling radio reception here if you
want to operate your clock manually. Use the "+/ " or "-/C/F" button to
select ON or OFF and confirm your selection by pressing the
"SET/ZONE" button. The setting function is now complete.
Note: If no button is pressed for approx. 2 minutes during the manual
setting procedure, the time setting mode will be terminated. Any data you
have entered will be saved.
4.2.3 12/24-hour format
To set the 12/24-hour format please proceed as described under section
4.2.2 "Manual setting". The 12-hour format is indicated by the "PM" symbol
to the left above the time.
4.2.4 Weekday display
The weekday display appears immediately after the batteries have been
inserted. The weekday display will be automatically adapted to the date by
your radio controlled wall clock. To set the language for the weekday
display please refer to section 4.2.2 "Manual setting".
4.2.5 Calendar week
The calendar week depends on the current date and is calculated
automatically.
4.2.6 Time zone
You can use this function to set and display the time for any time zone. In its
basic setting the time zone is equal to the local time.
The Earth is divided into 24 time zones. A time zone is a section of the
Earth's surface where a common time applies. This usually runs along the
longitudinal lines from the poles. When passing into another zone time
changes by one hour. In an easterly direction time moves forward by one
hour and in a westerly direction it moves backward by one hour. If, for
example, you want to set the time for a country which is 6 time zones west
of your country, you will need to enter minus 6 hours.
Setting the time
zone
1. To set the time
zone press and
hold the
"SET/ZONE"
button for
approx.
3 seconds until
the language
for the
weekday
display starts to flash.
2. Now press the "SET/ZONE" button 7 times until a flashing digit (from
-12 to +12) appears on the display.
3. Press the "+ " - or "–/C/F" button to set your desired time zone. Confirm
your selection by briefly pressing the "SET/ZONE" button twice. The
local time is now displayed again. The setting function is now complete.
You can now switch between the local time and the time of the selected
zone by briefly pressing the "SET/ZONE" button. When the time is
being displayed for the respective zone the ZONE symbol appears to the left
above the time.
Note: You can only adjust the hour in this mode; the minutes run
synchronously with the normal time.
4.3 Alarm time
The radio controlled wall clock has three configurable alarm settings: a
weekday alarm (AL M-F), a weekend alarm (AL S-S) and an appointment
alarm (AL AP).
4.3.1 Setting the alarm
To set one of the three alarm times press and hold the "ALARM" button for
approx. 3 seconds.
The alarm AL M-F (Monday – Friday)
appears and the hour starts to flash;
use the "+/
" or "-/C/F" button to set the desired hour and confirm your
selection by pressing the "ALARM" button. The minutes now start to flash;
use the "+/
" or "-/C/F" button to select the relevant minute and press the
"ALARM" button to confirm your setting.
The alarm AL S-S (Saturday – Sunday) appears and the hour starts to flash;
use the "+/
" or "-/C/F" button to set the desired hour and confirm your
selection by pressing the "ALARM" button. The minutes now start to flash;
use the "+/ " or "-/C/F" button to set the relevant minute. Press the
"ALARM" button again to confirm your setting.
The Alarm AL AP (appointment alarm) appears and the year flashes. Use
the "+/
" or "-/C/F" button to set the desired year and confirm your
selection by pressing the "ALARM" button. The month now starts to flash;
set the month, date, hour and minute in the same way. Press the "ALARM"
button again to confirm the setting for the date and time of the alarm; the
alarm setting function is now complete.
4.3.2 Activating/deactivating the alarm and alarm
repeat function
To activate or deactivate one of the three alarms press the "ALARM"
button; Alarm AL M-F
(Monday - Friday) appears. Press the " " button to
activate or deactivate the alarm (
) and optionally the alarm repeat function
(Zz) for this alarm time (symbol appears/disappears). Press the "ALARM"
button to confirm your selection.
Alarm AL S-S
(Saturday - Sunday) appears; press the " " button again to
activate or deactivate the alarm (
) and optionally the repeat alarm function
(Zz) for this alarm time (symbol appears/disappears). Press the "ALARM"
button to confirm your selection.
Alarm AL AP
(appointment alarm) appears; press the " " button to activate
or deactivate the alarm ( ) for the appointment alarm function (symbol
appears/disappears). The appointment alarm is a non-recurring alarm and it
cannot be repeated with the alarm repeat function (Zz).
4.3.3 Displaying the alarm time
Alarm time AL M-F (Monday - Friday), alarm time AL S-S (Saturday
- Sunday) and the appointment alarm can be displayed by pressing the
"ALARM" button: Press once to display alarm time AL M-F (Monday
- Friday); press twice to display alarm time AL S-S (Saturday - Sunday);
press three times to display the appointment alarm; and press four times to
return to the normal display or wait several seconds until the clock
automatically reverts to the normal display.
4.3.4 Switching off the alarm
Alarm ( ): When the alarm sounds it either switches off automatically after
2 minutes or it can be switched off by pressing any button. The weekday and
weekend alarm, however, remain active; i.e. the alarm will sound again the
following weekday (Monday - Friday) or Saturday - Sunday at the same
time.
Repeating the alarm (Zz):
To enable this feature the alarm repeat function
(section 4.3.2) must be activated and the Zz symbol must be visible on the
display. Pressing the "SNOOZE" button while the alarm is sounding causes
the Zz symbol to flash and the alarm to sound again after 8 minutes. You
can switch off the alarm by pressing any other button. The weekday and
weekend alarm, however, remain active; i.e. the alarm will sound again the
following weekday (Monday - Friday) or Saturday - Sunday at the same
time.
Note: The alarm responds to the time indicated in the display (radio
controlled time, manually set time or time of the respective time zone).
4.4 Temperature display
The temperature display appears to the centre right of the display
immediately after the batteries have been inserted. The temperature display
does not indicate the current ambient temperature immediately, because the
temperature sensor needs some time to measure the changes in temperature.
Please note that the temperature displayed can be a little higher or lower if
the clock is mounted on a wall, as this can radiate heat or cold.
Selecting °Celsius / °Fahrenheit:
To switch between °C and °F press and hold the "-/C/F" button for approx.
3 seconds ; the display then switches from °C to °F . Press and hold the
"-/C/F" button again for approx. 3 seconds to switch the display from °F
to °C.
4.5 Moon phase
The moon phase depends on the current date and is displayed with the
following symbols:
Full moon Waning moon New moon
New moon Waxing moon Full moon
4.6 Technical specifications
Temperature: Accuracy: +/- 1°C Measuring range: 0°C to 50°C
5 Assembly
The clock can either be set up on its feet or mounted on a wall using the rear
hanging mount. When using the feet please make sure they firmly engage in
place.
6 Changing the batteries
Replace the batteries immediately when the display becomes weak or faded.
Open the battery compartment cover located at the rear of the radio
controlled wall clock. Before inserting the batteries clean the battery
contacts and the contacts in the clock. Insert the batteries (2 x LR6/R6 / AA
1.5V batteries) and close the battery compartment cover (pay attention to the
correct polarity). Only replace the batteries with equivalent battery types and
do not use a mixture of old and new batteries, as old batteries can leak. We
recommend you operate the clock with ordinary batteries as opposed to
rechargeable batteries.
7 Declaration of conformity
R&TTE Directive 1999/5/EC: Summary of the
declaration of conformity: Krippl-Watches hereby declares
that the radio controlled wall clock
AE1-FW-10SN conforms to the basic requirements and
other relevant provisions of Directive 1999/5/EC. You can access the
declaration of conformity in its entirety via our website at:
http://www.produktservice.info EAN: 25072518
8 Troubleshooting
The radio controlled clock does not receive a radio signal: If the clock does
not receive a signal, please try again at a different location. The reception of
the signal can be impaired or even prevented by structural or natural
obstructions (e.g. mountains). The radio controlled wall clock is equipped
with a quartz clock which can then be used as an alternative (see section
4.2.2 "Manual setting"). Electromagnetic or atmospheric interference can
also disrupt the radio signal. This type of interference can normally be
eliminated by simply selecting a different location.
Incorrect temperature display:
The temperature display is influenced by
direct sunlight. Please position your clock in such a way that it is not
exposed to direct sunlight.
Weak batteries: Replace the batteries as soon as the display becomes weak
or faded. When inserting the new batteries always make sure the polarity is
correct (see section 6 "Changing the batteries"). After changing the batteries
proceed as described under section 3 "Commissioning".
Time in hours, minutes
and seconds
Alar
m
Day of the week Calendar week
Radio tower symbol:
- Radio waves displayed continuously:
radio controlled time received
- Radio waves flashing: searching for
radio controlled time
- Not visible: radio signal lost and/or
manual time se
t
Snooze function
Date
Month
Tem
p
erature
Moon
p
hase
" " button
"SET/ZONE" button "ALARM" button "+
/
" button
"- /C/F" button
"SNOOZE" button
/
