Item No. 207332
AMBIENT NOISE SOUND SOOTHER
User Guide
Thank you for purchasing the Sharper Image Ambient Noise Sound
Soother. Please read these instructions prior to using this device for
the first time. In addition, please store this guide for future reference.
- 1 -
FEATURES
• Built-in rechargeable battery (7V/1200 mAH)
• 7-hours of continuous playing time
• 29 different built-in sounds
• 7 colors options: red, orange, yellow, green, cyan, blue, violet, and white (night
light, brightness and color can be adjusted according to personal preference)
• Timer setting function (30 minutes, 60 minutes, and 90 minutes
• Timer fadeout (sound gradually diminishes before the device automatically
turns off)
• Memory function
INSTRUCTIONS
- 2 -
1. Light Switch / Brightness Control Button.
• Short press to circle through the available modes: ON, OFF, and Breathing
Light.
• Press and hold to adjust the brightness of the light. Long press and hold the
button to change the brightness from light to dark, or from dark to bright.
Release the button to achieve the desired level of brightness.
2. Color Light Adjust
• Short press to select color (red, orange, yellow, green, cyan, blue, violet,
and white).
• Long press to cycle through these colors.
3. White Noise Button
• Choose from 7 different kinds of white noise. A tone can be heard after one
loop.
4. Fan Button
• Choose from 7 different kinds of fan sounds. A tone can be heard after one
loop.
5. Nature Sounds Button
• Short press to choose from 15 built-in nature sounds: forest bird, waves,
crickets, campfire, train, pendulum, thunder, ocean, rain, water, drip, hiss,
fetal sound, lullaby, and music box. A tone can be heard after one loop.
6. Timing Button
• Press this button to choose the desired timer setting: 30 minutes, 60
minutes, 90 minutes, or non-stop. After the timing function is started, the
volume can gradually diminish before the machine shuts down automatically.
7. Volume Decrease Button
• Long press or short press this button to decrease the volume.
- 3-
8. Volume Increase Button
• Long press or short press this button to increase the volume. A “ding” sound
can be heard once you reach maximum volume
9. Power Button
• Press and hold for two seconds to turn the device On/Off.
10. Charge Indicator
• The indicator light will turn solid red while charging. After it’s fully charged,
it will turn green. The indicator light will flash red when the battery level
is low.
11. Timing Indicator
• The indicator light will turn yellow after a timer setting has been selected
12. Micro-USB Charging Port
13. Earphone Output Port
SPECIFICATIONS
• Charging Voltage: DC 5V
• Charging Time: 2.5 hours
• Loudspeaker Specifications: 52mm 2 5W
• THD: ≤1%
• SNR: ≥78dB
• Battery Capacity: 3.7V/1200mAH
• Dimensions: 3.8” L x 3.1” W x 4.4” H
- 4 -
WARRANTY/CUSTOMER SERVICE
Sharper Image branded items purchased from SharperImage.com include a 1-year
limited replacement warranty. If you have any questions not covered in this guide,
please call our Customer Service department at 1 (877) 210-3449. Customer Service
agents are available Monday through Friday, 9:00 a.m. to 6:00 p.m. ET.
- 5 -
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
FRONT SIDE
BACK SIDE
12 13
1
2
6 7 10 8 9
11
3
5
4
2
1
