Bay Networks 5393 Installation guide

Part No. 166-024-634 Rev. A

January 1997

Installing

Remote Annex

Network

Software for

Windows

The information in this document is subject to change without notice. The statements,

conﬁgurations, technical data, and recommendations in this document are believed to

be accurate and reliable, but are presented without express or implied warranty. Users

must take full responsibility for their applications of any products speciﬁed in this

document. The information in this document is proprietary to Bay Networks, Inc.

The software described in this document is furnished under a license agreement and

may only be used in accordance with the terms of that license.

Restricted Rights Legend

Use, duplication, or disclosure by the United States Government is subject to

restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and

Computer Software clause at DFARS 252.227-7013.

Notice for All Other Executive Agencies

Notwithstanding any other license agreement that may pertain to, or accompany the

delivery of, this computer software, the rights of the United States Government

regarding its use, reproduction, and disclosure are as set forth in the Commercial

Computer Software-Restricted Rights clause at FAR 52.227-19.

Trademarks of Bay Networks, Inc.

Annex, Remote Annex, Annex Manager, Remote Annex 2000, Remote Annex 4000,

Remote Annex 6100, Remote Annex 6300, Remote Annex 5390/Async, Remote

Annex 5391/CT1, Remote Annex 5393/PRI, BayStack Remote Annex 2000 Server,

Quick2Conﬁg Annex, Bay Networks, Bay Networks Press, and the Bay Networks logo

are trademarks of Bay Networks, Inc.

Third Party Trademarks

All other trademarks and registered trademarks are the property of their respective

owners.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability,

Bay Networks, Inc. reserves the right to make changes to the products described in

this document without notice.

Bay Networks, Inc. does not assume any liability that may occur due to the use or

application of the product(s) or circuit layout(s) described herein.

In addition, the program and information contained herein are licensed only pursuant

to a license agreement that contains restrictions on use and disclosure (that may

incorporate by reference certain limitations and notices imposed by third parties).

iiiInstalling Remote Annex Network Software for Windows

Contents

Preface

Supported Platforms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi

Using this Manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

Supported Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xii

Printing Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xiii

Chapter 1

Overview, Requirements, and

Online Help

Workstation Hardware and Software Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Requirements for Server Tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Requirements for NA and Quick2Config Annex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Annexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

IP Stack Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Windows 3.1 and Windows for Workgroups 3.11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Windows 95 and Windows NT TCP/IP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

Making Installation Diskettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Using the Annex Software Online Help System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Starting Online Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-9

Moving around Online Help. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

Exiting Online Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-10

Chapter 2

Installing on a Windows NT Server

Security Authentication. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

SecurID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

RADIUS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Log On Privileges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Starting the Setup Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Installing NA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Loading Server Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

No Previous Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Previous Version Found . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12

Choosing Remote Annexes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

Loading Quick2Config Annex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

No Previous Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

Previous Version Found . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

Loading the Programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Getting Started with Remote Annex Network Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-20

Chapter 3

Installing on Windows 95 and

Windows NT Workstation 3.51

and 4.0

Starting the Setup Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Installing NA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Loading Quick2Config Annex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

No Previous Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Previous Version Found . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9

Installing Remote Annex Network Software for Windows

Contents

iv

Loading the Programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

Getting Started with Quick2Config Annex and NA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Chapter 4

Installing Quick2Config on

Windows 3.1 and Windows for

Workgroups 3.11

Starting the Setup Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Win32s Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Loading Quick2Config Annex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

No Previous Version. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Previous Version Found . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Installing the IP Stack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Getting Started with Quick2Config Annex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-13

Chapter 5

Configuration Examples

Configuring Remote Annex Ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1

Accessing the Annex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Configuring an Annex Terminal Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Configuring a Dial-In Modem Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Configuring a Dial-Out Modem Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13

Setting Up PRI Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15

Access the Annex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-16

Configuring for Dial-in Clients. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18

Channel Configuration for PPP Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-20

Editing the Session Parameter Blocks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21

Saving the List of Client Annexes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24

Appendix A

Configuring the NetManage

ChameleonNFS IP Stack (16-bit)

Editing win.ini (If System Files Were Not Modified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Editing System Files for Network Adapter Cards with ODI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Adding an Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

Specifying Network Adapter Parameters (NDIS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

Supported Vendor and Board Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

Unsupported Vendor and Board Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

Specifying the IP Address and Subnet Mask . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-9

Specifying the Host Name and Domain Name. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10

Selecting the Ethernet Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12

Defining the Default Gateway. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12

Disabling Trap Administration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-13

Saving Your Custom Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-14

Verifying Network Connectivity (16-bit) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-15

v

Contents

Installing Remote Annex Network Software for Windows

Appendix B

Modifying System Files

Sample System Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Sample System Files (Windows 3.1 and Windows for Workgroups 3.11) . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Installing Remote Annex Network Software for Windows

Contents

vi

viiInstalling Remote Annex Network Software for Windows

Figures

Figure 1-1. Make Floppies Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7

Figure 1-2. Choose Location Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8

Figure 2-1. Welcome Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

Figure 2-2. Select Operation Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

Figure 2-3. Install Software Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-6

Figure 2-4. Overwrite or Install Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7

Figure 2-5. Choose Destination Location Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8

Figure 2-6. Setup Progress Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Figure 2-7. Readme File Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-9

Figure 2-8. Server Tools Choose Destination Location Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-10

Figure 2-9. Choose Directory Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11

Figure 2-10. Server Tools Installation Option Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-13

Figure 2-11. Select Remote Annex Image Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

Figure 2-12. Server Tools Options Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-15

Figure 2-13. Choose Destination Location Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-16

Figure 2-14. Overwrite or Install Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17

Figure 2-15. Setup Progress Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Figure 2-16. Readme File Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19

Figure 2-17. Setup Complete Message Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-19

Figure 3-1. Welcome Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2

Figure 3-2. Installation Options Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3

Figure 3-3. Install Software Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Figure 3-4. Overwrite or Install Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

Figure 3-5. Choose Destination Location Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6

Figure 3-6. Setup Progress Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Figure 3-7. Readme File Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7

Figure 3-8. Choose Destination Location Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-8

Figure 3-9. Overwrite or Install Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10

Figure 3-10. Setup Progress Icons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

Figure 3-11. Readme File Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

Figure 3-12. Setup Complete Message Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-12

Figure 4-1. Win32s Installation Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Figure 4-2. Restart Windows Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3

Figure 4-3. Welcome Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Figure 4-4. Installation Options Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Figure 4-5. Choose Destination Location Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

Figure 4-6. Overwrite or Install Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7

Figure 4-7. Choose Installation Directory Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8

Figure 4-8. IP Stack Query Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9

Figure 4-9. Modify System Files Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

Figure 4-10. Setup Message Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-10

Figure 4-11. Information Message Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-11

Figure 4-12. Restart Windows Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-12

Figure 5-1. Add Annex Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

Figure 5-2. Annex Icon, Name, and Model Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Figure 5-3. Expanded Annex Tree View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Figure 5-4. Setting Port 1 to no modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Figure 5-5. Quick2Conﬁg Annex Reset Conﬁrmation Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Figure 5-6. Line Control Settings for Port 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Installing Remote Annex Network Software for Windows

Figures

viii

Figure 5-7. Quick2Conﬁg Annex Port General Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-7

Figure 5-8. Quick2Conﬁg Annex Port Line Control Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-9

Figure 5-9. Quick2Conﬁg Annex Modems Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-10

Figure 5-10. Quick2Conﬁg Annex Modem Interfaces Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-11

Figure 5-11. Port 3 Set for Dial-out Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-13

Figure 5-12. Port Identiﬁcation Using the who Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-14

Figure 5-13. netstat -ip Command and Return. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-14

Figure 5-14. Add Annex Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-16

Figure 5-15. Annex Icon and RA6300 Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-17

Figure 5-16. Expanded RA6300 Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-18

Figure 5-17. Quick2Conﬁg Call Defaults Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-19

Figure 5-18. Quick2Conﬁg Channel Tab. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-21

Figure 5-19. Session Parameter Blocks in the Default Annex Conﬁguration File . . . . . . . . . . . . . . . . . . . . . . . . .5-22

Figure A-1. Custom Window. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

Figure A-2. Add Interface Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

Figure A-3. Hardware Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

Figure A-4. “Other” Hardware Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

Figure A-5. Internet Address Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-9

Figure A-6. Subnet Mask Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-10

Figure A-7. Host Name Dialog Box. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-11

Figure A-8. Domain Name Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-11

Figure A-9. Ethernet Type Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12

Figure A-10. Default Gateway Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-13

Figure A-11. Trap Administration Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-14

Figure A-12. Custom Program Exit Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-15

Figure A-13. Ping Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-16

Figure A-14. Host Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-16

ixInstalling Remote Annex Network Software for Windows

Tables

Table 1-1. Supported Platforms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Table 1-2. Workstation Hardware and Software Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Table 1-3. Supported IP Stacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Table A-1. Where to Go Next . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Installing Remote Annex Network Software for Windows

Tables

x

xiInstalling Remote Annex Network Software for Windows

Preface

Read this guide if you will use Remote Annex Network Software for

Windows to conﬁgure and manage Bay Networks™ Remote Annexes.

This software includes:

• Remote Annex Server Tools for Windows NT version 2.5

• NA command line interface version 2.4

• Quick2Conﬁg Annex version 2.3

You should be familiar with:

• IBM compatible PC terminology and operation

• Microsoft Windows 3.1, Windows for Workgroups 3.11,

Windows NT 3.51 or 4.0, or Windows 95

• Networking terminology

Supported Platforms

Remote Annex Network Software for Windows NT runs on a variety of

Microsoft Windows platforms, including Windows NT 3.51 and 4.0, and

Windows 95. Speciﬁc platform support and requirements are discussed

in Chapter 1.

The latest release of Remote Annex Network Software may not

support existing devices currently installed on your system. We

recommend that you do NOT accept the default destination directory

name and install the current version if this software to another

location.

Installing Remote Annex Network Software for Windows

Preface

xii

Using this Manual

We have organized this manual follows:

• Chapter 1 describes Remote Annex Network Software for

Window, and the hardware and software you need to install

each module.

• Chapter 2 covers installation of the Remote Annex software on

a Windows NT Server 3.51 or 4.0.

• Chapter 3 describes how to install Quick2Conﬁg Annex and

NA on Windows 95 and Windows NT Workstation.

• Chapter 4 describes how to install Quick2Conﬁg Annex on

Windows 3.1 and Windows for Workgroups 3.11.

• Chapter 5 contains instructions for conﬁguring some common

systems using Quick2Conﬁg Annex.

• Appendix A describes how to use the NetManage Custom

program.

• Appendix B describes the example ﬁles you may need to

reference if you do not let Quick2Conﬁg Annex modify your

system ﬁles.

Supported Version

All releases of Remote Annex Network Software for Windows which

includes Remote Annex 2000, 4000, 6100, 539x, and 6300 are supported

under release 13.3.

xiii

Preface

Installing Remote Annex Network Software for Windows

Printing Conventions

bold text Indicates text that you need to enter and

command names in text.

Example: Use the dinfo command.

italic text Indicates variable values in command syntax

descriptions, new terms, file and directory

names, and book titles.

quotation marks (“ ”) Indicate the title of a chapter or section within a

book.

separator ( > ) Separates menu and option names in

instructions. Example: Protocols > AppleTalk

identifies the AppleTalk option in the Protocols

menu.

screen text Indicates data that appears on the screen.

Example:

Set Bay Networks Trap Monitor

Filters

Installing Remote Annex Network Software for Windows

Preface

xiv

1-1Installing Remote Annex Network Software for Windows

Chapter 1

Overview, Requirements, and

Online Help

This chapter provides an overview of Remote Annex Network

Software for Windows, and the requirements for installing the software.

The chapter also provides information on copying the installation

program to diskettes and describes how to use online help.

Remote Annex Network Software for Windows includes three modules:

Server Tools

Remote Annex Server Tools for Windows NT allows you to boot and

conﬁgure Remote Annexes in a Windows NT network. The software

includes the expedited remote procedure call daemon (erpcd), which runs

on the host server and on request from the Annex downloads operational

code and other ﬁles. The Server Tools also enable you to use the Windows

NT domains to authenticate and authorize Annex users.

NA Command Line

Interface

The Network Administrator Utility (NA) is a command line interface

that enables you to display and conﬁgure operating characteristics of an

Annex and its ports. The utility also enables you to remotely boot the

Annex, upload the Annex operating image before a boot and broadcast

administrative messages to ports on an Annex. The utility can be installed

with the Server Tools on the host server and on other Windows platforms

on the network.

Quick2Conﬁg Annex

The Quick2Conﬁg Annex application provides a Microsoft Windows

based user interface that you can use to conﬁgure, manage and monitor

remote access servers in a networked environment. Quick2Conﬁg Annex

is compatible with the Optivity™ network management products from

Bay Networks. Using the Quick2Conﬁg Annex application you can:

• Conﬁgure an Annex or group of Annexes with an easy-to-use

graphical interface

• Retrieve status and statistical information from an Annex or

Annexes

• Discover Annexes on the network

Installing Remote Annex Network Software for Windows

Chapter 1 Overview, Requirements, and Online Help

1-2

Workstation Hardware and Software Requirements

Table 1-1 lists the platforms on which the various components of the

Annex software can operate. Note that there can be multiple instances of

NA and Quick2Conﬁg Annex on the same Windows NT network.

Table 1-1. Supported Platforms

Chapter 2 of this guide describes installation of the software on the host

server. Chapter 3 provides instructions for installing NA and

Quick2Conﬁg Annex on Windows NT Workstations and Windows 95

systems. Chapter 4 covers installation of Quick2Conﬁg Annex on

Windows for Workgroups 3.11 and Windows 3.1 platforms.

Requirements for Server Tools

Before you install Remote Annex Server Tools for Windows NT, make

sure you have the following:

• Windows NT Server version 3.51 or 4.0, conﬁgured to support

TCP/IP protocol

• Administrative privileges on the server

• At least 10 MB free disk space on the NTFS drive

Platform

Server

Tools

NA

Utility

Quick2Conﬁg

Annex

Windows NT Server 3.51 or 4.0 Yes Yes Yes

Windows NT Workstation 3.51 or 4.0 Yes Yes

Windows 95 Yes Yes

Windows for Workgroups 3.11 Yes

Windows 3.1 Yes

1-3

Chapter 1 Overview, Requirements, and Online Help

Installing Remote Annex Network Software for Windows

• One Windows NT Server client license per Remote Annex

• PC with an Intel 486 (or higher) CPU with 32 MB RAM

• CD ROM drive to install the product

Remote Annex Server Tools for Windows NT requires Remote Annex

Software Release 11.1 or a subsequent release. The CD ROM includes

the appropriate Remote Annex software release.

Requirements for NA and Quick2Conﬁg Annex

The NA Command Line Interface and the Quick2Conﬁg Annex

application can be installed on client platforms as well as on the server.

Table 1-2 lists the minimum hardware and software requirements for

installing and running this software on a workstation.

Table 1-2. Workstation Hardware and Software Requirements

(continued on next page)

Workstation Hardware/

Software

Requirements

Computer 100% IBM compatible; 80386 or higher; 33

MHz or higher

Monitor Windows compatible VGA or Super VGA

adapter and display (640 by 480 or higher)

RAM 8 MB (minimum)

Hard disk Approximately 7 MB of free space for both

Quick2Conﬁg (6 MB) and NA (1 MB) on

Windows 95 or Windows NT

Approximately 14.5 MB of free space for

Quick2Conﬁg with a stack (9 MB) and Win32s

1.30 or later (5.5 MB) installed on Windows 3.1

or Windows for Workgroups 3.11

Mouse Microsoft compatible mouse

Installing Remote Annex Network Software for Windows

Chapter 1 Overview, Requirements, and Online Help

1-4

Table 1-2. Workstation Hardware and Software Requirements (continued)

Annexes

Quick2Conﬁg Annex supports Remote Annexes 6300 and 5393 running

Release 13.3 or later, Remote Annexes 2000, 4000, 5390, 5391 and 6100

running version 11.2 or later, and Communications Server Release 10.0.

IP Stack Software

The computer that runs Quick2Conﬁg Annex must also run network

communications software (an IP stack software package). This software

is included with Windows NT and Windows 95. Quick2Conﬁg Annex

checks your hard drive during installation for a compatible IP stack.

You cannot operate two IP stacks at the same time. If you want to

install NetManage Chameleon 4.6 that came with Quick2Conﬁg

Annex (Windows and Windows for Workgroups) or the Microsoft

TCP/IP stack (Windows 95 and Windows NT), ﬁrst disable any

existing IP stack.

Workstation Hardware/

Software

Requirements

Operating systems Windows NT Server 3.51 or 4.0

Windows NT Workstation 3.51 or 4.0

Windows 95

MS-DOS 6.0 or later (Version 6.2

recommended) with Microsoft Windows 3.1

(running Win32s 3.10 or later) and Windows for

Workgroups 3.11 (running Win32s 3.10 or later)

CD-ROM drive Quick2Conﬁg Annex and NA software (for

Windows 95 and Windows NT) are supplied on

CD-ROM

1-5

Chapter 1 Overview, Requirements, and Online Help

Installing Remote Annex Network Software for Windows

Windows 3.1 and Windows for Workgroups 3.11

The following sections describe the restrictions and requirements you

need to be aware of before you install Quick2Conﬁg Annex application

software.

Win32s

You need to install Win32s (version 1.30.166.0 or later) with Microsoft

Windows and Windows for Workgroups before you can install

Quick2Conﬁg Annex. The Quick2Conﬁg Annex install program prompts

you to install Win32s if you do not have it installed on your system.

Mode

To install ChameleonNFS on Microsoft Windows or Windows for

Workgroups, you must run in Enhanced Mode.

Supported IP Stacks

Quick2Conﬁg Annex is compatible with the IP stack software packages

listed in

Table 1-3.

Table 1-3. Supported IP Stacks

Vendor Package (Compliant with WinSock 1.1)

NetManage, Inc. ChameleonNFS for Windows, Version 4.6

Novell LAN WorkPlace for DOS Version 5.0,

as shipped with FastLink™ II Client Version 2.13

FTP Software, Inc. OnNET Version 2.1

Microsoft TCP/IP

Installing Remote Annex Network Software for Windows

Chapter 1 Overview, Requirements, and Online Help

1-6

Installing NetManage ChameleonNFS IP

You cannot install a NetManage ChameleonNFS IP stack after you install

Quick2Conﬁg Annex. If the Setup program does not recognize a

compliant installed IP stack, you must install the NetManage

ChameleonNFS IP stack shipped with Quick2Conﬁg Annex during

Quick2Conﬁg Annex installation, or exit the installation program to

install a supported package.

If you install the NetManage ChameleonNFS IP stack during

Quick2Conﬁg Annex installation, the Custom program automatically

starts during installation. Refer to Chapter 4 and Appendix A for

information about the Custom program.

Adding Other Supported IP Stacks

Install other supported IP stack software (compliant with WinSock 1.1),

such as FTP or FastLink II, before or after you install Quick2Conﬁg

Annex.

Windows 95 and Windows NT TCP/IP

You do not have to install the Microsoft TCP/IP stack for Windows 95

or Windows NT before you install Quick2Conﬁg Annex. Refer to your

Microsoft documentation to install the Microsoft TCP/IP stack.

Page is loading ...

Bay Networks 5393 Installation guide

Bay Networks 5393 Installation guide

Related papers

Other documents