L-C2-464
REV 0 - 1412091130
L-C2-464
REV 0 - 1412091130
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
This cover is for use with your American Outdoor Grill product. It
is constructed of a durable material that will protect your appliance
when not in use. Many covers are designed with double-stitched
vents to provide ventilation.
To install a built-in cover, place the cover over your unit, with the
AOG logo facing forward. Pull the elastic under the front-bottom
edge of the unit. Reference Fig. 1-1 for an example.
To install an accessory cover, place the cover over the lid of
your unit, with the AOG logo facing forward/upward. If the corners
of the cover are equipped with clips, carefully pull each clip over
the front-bottom edge of the unit.
To install a portable cover, place the cover over your unit with
the AOG logo facing forward. If the cover is equipped with Velcro
strips, they may be used to secure the skirt portion of the cover.
To clean the cover, use mild hand soap with warm water and a
sponge.
Grill & Accessory Cover
Fig. 1-1
Built-in cover shown, design may vary
It is recommended that you wash the cover only
as needed.
To prevent mold and mildew: wipe down and
dry your cover with a soft towel or cloth after
cleaning or rainfall.
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
This cover is for use with your American Outdoor Grill product. It
is constructed of a durable material that will protect your appliance
when not in use. Many covers are designed with double-stitched
vents to provide ventilation.
To install a built-in cover, place the cover over your unit, with the
AOG logo facing forward. Pull the elastic under the front-bottom
edge of the unit. Reference Fig. 1-1 for an example.
To install an accessory cover, place the cover over the lid of
your unit, with the AOG logo facing forward/upward. If the corners
of the cover are equipped with clips, carefully pull each clip over
the front-bottom edge of the unit.
To install a portable cover, place the cover over your unit with
the AOG logo facing forward. If the cover is equipped with Velcro
strips, they may be used to secure the skirt portion of the cover.
To clean the cover, use mild hand soap with warm water and a
sponge.
Grill & Accessory Cover
Fig. 1-1
Built-in cover shown, design may vary
It is recommended that you wash the cover only
as needed.
To prevent mold and mildew: wipe down and
dry your cover with a soft towel or cloth after
cleaning or rainfall.
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
AOG Built In Grill T-Series User manual
-
-
-
Fire Magic Oven Hood Side Handle Kit User manual
-
-
-
-
-
-
Other documents
-
American Outdoor 24PC-00SP Owner's manual
-
American Outdoor Grill 24NBL Installation guide
-
American Outdoor 24NB Owner's manual
-
Fire Magic Propane Tank Holder User manual
-
-
-
American Outdoor 24NP Owner's manual
-
-
-
American Outdoor 24NG-00SP Owner's manual
