Wireless Earphone
With Car Charger (BTS20)
Thank you for purchasing the Valore Wireless Earphone With Car Charger (BTS20).
A brilliant combination of car charger and wireless earphone. You can now enjoy hands-free
high quality audio wirelessly yet keep it fully charged while you’re driving. Enjoy wireless
streaming of your favourite music and podcasts with built-in A2DP feature. Plus, the USB
2.0A output also charges your mobile devices at the same time.
Important: Please read the user manual thoroughly before using your wireless earphone
with car charger.
Specifications: Package Contents:
• Wireless range: Up to 10m
• Support: A2DP/HSP/HFP
• Built-in battery: 30mAh Lithium battery
• Standby time: Up to 50 hours
• Charging time: Up to 2 hours
• Playback time: Up to 2 hours
• Power input: DC12-24V
• Power output: DC5V/2A (max)
• Dimension (L x W x H): 91 x 42 x 42mm
• Material: ABS + PC
• Weight: 33g
UNDERSTANDING THE PRODUCT
• Wireless earphone with car
charger
• Earcap x 2 (S size)
① Microphone
② LED indicator
③ Multi-function button (M)
④ USB output
①
②
③
④
START USING THE WIRELESS EARPHONE
1) Charging the wireless earphone
Connect the earphone with car charger to your car’s charging port to charge the earphone.
Fully charge the earphone before using.
Note: Please make sure that the earphone is switched off when charging is in progress.
2) Pairing the wireless earphone (switched off)
Single:
Step 1: Activate Bluetooth function on your mobile device to begin pairing with earphone.
Step 2: Switch on the earphone by long pressing the multi-function button till the LED
indicator flashes blue and red.
Step 3: Connect to the earpiece by selecting ‘Valore BTS20’ under the device list.
Step 4: Once connected, the LED light at the will be solid blue.
If the pairing is not successful, please turn off wireless earphone first, and then re-pair again. After pairing is
successful, paired devices will remember each other. Unless pairing information is deleted because of new
pairing, no need to pair when using the next time.
If you want to pair the wireless earphone with other devices, please turn off Bluetooth function of existing
source device, and pair the wireless earphone with the new device according to steps 1-4 mentioned above.
3) Wireless earphone controls
Answer/End call: Short press the Multi-function button to answer/end call.
Rejecting a call: Press and hold the Multi-function button to reject a call.
Redial last number: Press the Multi-function button twice to redial last number.
Call forwarding: During a call, press and hold the Multi-function button to forward a call.
Play/Pause music: Press the Multi-function button once to play/pause music.
Three-Wall calling: If a call (B) is coming in during an on-going call (A), press the
Multi-function button to release A and answer B. You can also press the
Multi-function button twice to hold A and answer B and press the
Multi-function button twice again to switch between A and B.
Power off: Press and hold the Multi-function button for about 5 seconds to power off.
Enable/Disabling voice control: Press the Multi-function button for one second, voice
control is enabled when a buzz sound is heard. Press the
Multi-function button for one second again, voice control
will be disabled.
Sleep mode: When not in use, put the earphone back to the base. The red LED is on for one
second and the earphone will automatically enter sleep mode.
Intelligent call answering: When there is an incoming call, take the earphone out of the
base and the earphone will automatically re-connect to your
smartphone allowing you to answer the call.
TROUBLESHOOTING
Issue 1: Earphone is unable to switch on
Cause 1: Earphone battery is flat
Solution: Fully charge the earphone (2 hours) and retry connection with your mobile device.
Cause 2: Time of holding down multi-function button is too short.
Solution: Press and hold the multi-function button until the LED indicator is lit.
Issue 2: Unable to charge the earphone
Cause 1: The car charger is not properly connected.
Solution: Reconnect the car charger to the charging port fully.
Issue 3: Unable to switch off earphone
Cause 1: The earphone program has an error due to an incorrect operation.
Solution: Charge and reset the earphone.
Issue 4: The earphone cannot be searched or paired.
Cause 1: The earpiece has not enter pairing state.
Solution: Press and hold the multi-function button until the LED indicator flashes blue and red,
then the earpiece has entered pairing mode.
TECHNICAL SUPPORT & WARRANTY
• For Technical Support, email us at [email protected].
• For Warranty Registration, visit www.valore.sg.
Cautions:
Read all the instructions and warnings carefully prior to using this product.
• Do not store the earpiece in a high temperature environment.
• Do not place the earpiece near a fire or other excessively hot environments.
• Do not expose this speakerto moisture or submerge it in liquid. Keep earpiece dry at all
times.
• Do not attempt to charge the earpiece using any other method or connection other than the
headset’s provided charging cable.
• Do not disassemble this earpiece or attempt to repair or modify it in any manner.
• Be cautious of excessive drops, bumps, abrasions or other impacts to this headset. If there
is any damage to the earpiece such as dents, punctures, tears, deformities or corrosion,
stop using the earpiece and contact us immediately via email at [email protected], or return
this product to the store where you have purchased it from.
• If the product produces an abnormal smell, high temperature (low temperature during
normal use), discolours or changes shape abnormally, stop using the product and contact us
immediately via email at [email protected].
DISCLAIMER & TRADEMARKS
All information, trademarks, logos, graphics, and images (“Materials”) provided on this user manual are
copyrighted or trademarked and are the property of Valore Lifestyle Pte Ltd. Any unauthorized use of any
material contained on the instruction manual may violate copyright laws, trademark laws, laws of privacy and
communications statutes.
The trademarks, service marks and logos used and displayed in the Materials are registered and unregistered
trademarks and service marks of Valore and others. All other registered and unregistered company names,
product names and marks mentioned herein the (“Materials”) are the property of their respective owners and
may be trademarks or registered trademarks.
Inspired by Valore Singapore
For full range of Valore products visit www.valore.sg
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Valore BTi33 Resonance Owner's manual
-
-
-
-
-
-
-
-
-