PSC Magellan 8200 User manual

Magellan

®

8100/8200

with FirstStrike

TM

Advanced Decoding Technology

Quick Reference Guide

Model 8204 shown

PSC Inc

959 Terry Street

Eugene, Oregon 97402

Telephone: (541) 683-5700

Fax: (541) 345-7140

therein may be reproduced or transmitted in any form or by any means without prior written permission of PSC Inc. or

its wholly owned subsidiaries ("PSC"). Owners of PSC products are hereby granted a non-exclusive, revocable license

to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not

remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure

that all notices appear on any reproductions of the documentation.

Should future revisions of this manual be published, you can acquire printed versions by contacting PSC Customer

Administration. Electronic versions may either be downloadable from the PSC web site (www.pscnet.com) or pro-

vided on appropriate media. If you visit our web site and would like to make comments or suggestions about this or

other PSC publications, please let us know via the “Contact PSC” page.

Disclaimer

Reasonable measures have been taken to ensure that the information included in this manual is complete and accu-

rate. However, PSC reserves the right to change any specification at any time without prior notice.

PSC is a registered trademark of PSC Inc. The PSC logo is a trademark of PSC. All other trademarks and trade

names referred to herein are property of their respective owners.

Magellan and SurroundScan are registered trademarks of PSC Inc. FirstStrike, All-Weighs, Produce Rail, Productivity Index

Reporting, SmartSentry and Any-Weighs are all trademarks of PSC Inc.

This product may be covered by one or more of the following patents: 4603262 • 4639606 • 4652750 • 4672215 • 4699447 • 4709369 • 4749879

4786798 • 4792666 • 4794240 • 4798943 • 4799164 • 4820911 • 4845349 • 4861972 • 4861973 • 4866257 • 4868836 • 4879456 • 4939355 •

4939356 • 4943127 • 4963719 • 4971176 • 4971177 • 4991692 • 5001406 • 5015831 • 5019697 • 5019698 • 5086879 • 5115120 • 5144118 •

5146463 • 5179270 • 5198649 • 5200597 • 5202784 • 5208449 • 5210397 • 5212371 • 5212372 • 5214270 • 5229590 • 5231293 • 5232185 •

5233169 • 5235168 • 5237161 • 5237162 • 5239165 • 5247161 • 5256864 • 5258604 • 5258699 • 5260554 • 5274219 • 5296689 • 5298728 •

5311000 • 5327451 • 5329103 • 5330370 • 5347113 • 5347121 • 5371361 • 5382783 • 5386105 • 5389917 • 5410108 • 5420410 • 5422472 •

5426507 • 5438187 • 5440110 • 5440111 • 5446271 • 5446749 • 5448050 • 5463211 • 5475206 • 5475207 • 5479011 • 5481098 • 5491328 •

5493108 • 5504350 • 5508505 • 5512740 • 5541397 • 5552593 • 5557095 • 5563402 • 5565668 • 5576531 • 5581707 • 5594231 • 5594441 •

5598070 • 5602376 • 5608201 • 5608399 • 5612529 • 5629510 • 5635699 • 5641958 • 5646391 • 5661435 • 5664231 • 5666045 • 5671374 •

5675138 • 5682028 • 5686716 • 5696370 • 5703347 • 5705802 • 5714750 • 5717194 • 5723852 • 5750976 • 5767502 • 5770847 • 5786581 •

5786585 • 5787103 • 5789732 • 5796222 • 5804809 • 5814803 • 5814804 • 5821721 • 5822343 • 5825009 • 5834708 • 5834750 • 5837983 •

5837988 • 5852286 • 5864129 • 5869827 • 5874722 • 5883370 • 5905249 • 5907147 • 5923023 • 5925868 • 5929421 • 5945670 • 5959284 •

5962838 • 5979769 • 6000619 • 6006991 • 6012639 • 6016135 • 6024284 • 6041374 • 6042012 • 6045044 • 6047889 • 6047894 • 6056198 •

6065676 • 6069696 • 6073849 • 6073851 • 6094288 • 6112993 • 6129279 • 6129282 • 6134039 • 6142376 • 6152368 • 6152372 • 6155488 •

6166375 • 6169614 • 6173894 • 6176429 • 6188500 • 6189784 • 6213397 • 6223986 • 6230975 • 6230976 • 6237852 • 6244510 • 6259545 •

6260763 • 6266175 • 6273336 • 6276605 • 6279829 • 6290134 • 6290135 • 6293467 • 6303927 • 6311895 • 6318634 • 6328216 • 6332576 •

6332577 • 6343741 • 6454168 • 6478224 • 6,568,598 • 6,578,765 • AU703547 • D312631 • D313590 • D320011 • D320012 • D323492 •

D330707 • D330708 • D349109 • D350127 • D350735 • D351149 • D351150 • D352936 • D352937 • D352938 • D352939 • D358588 • D361565

• D372234 • D374630 • D374869 • D375493 • D376357 • D377345 • D377346 • D377347 • D377348 • D388075 • D446524 • EP0256296 •

EP0260155 • EP0260156 • EP0295936 • EP0325469 • EP0349770 • EP0368254 • EP0442215 • EP0498366 • EP0531645 • EP0663643 •

EP0698251 • GB2252333 • GB2284086 • GB2301691 • GB2304954 • GB2307093 • GB2308267 • GB2308678 • GB2319103 • GB2333163 •

GB2343079 • GB2344486 • GB2345568 • GB2354340 • ISR107546 • ISR118507 • ISR118508 • JP1962823 • JP1971216 • JP2513442 •

JP2732459 • JP2829331 • JP2953593 • JP2964278 • MEX185552 • MEX187245 • RE37166 • Other Patents Pending

Quick Reference Guide i

PSC INC. MAGELLAN

®

END USER LICENSE AGREEMENT

Notice to End User: The PSC Product you have acquired contains embedded Software, which is integral to the product’s operation. This Software

is being provided to you under license, subject to the terms and conditions of this Agreement. If you use the PSC Product, you will be deemed to

have accepted the terms and conditions of this Agreement. If you do not intend to be bound to the terms of this Agreement, PSC is not willing to

license the Software to you, you may not use the PSC Product or the Software, and you must contact the party from whom you acquired the PSC

Product for instructions.

This End User Software License Agreement (“Agreement”) is a legally binding agreement governing the licensing of the Software and Documentation by PSC

Inc. and its wholly owned subsidiaries and affiliates (“PSC”) to the entity or person who has purchased or otherwise acquired a PSC Product (“End User”).

For purposes of this Agreement, any software that is associated with a separate end-user license agreement is licensed to you under the terms of that license

agreement. PSC and End User hereby agree as follows:

1. Definitions.

1.1 "Documentation" means materials such as user’s guides, program reference guides, quick reference guides, manuals, or similar materials associated

with or related to the PSC Product, whether in printed, “online”, or other form.

1.2 "Proprietary Information" means: (a) source code, object code, software, documentation, and any related internal design, system design, data base

design, algorithms, technology, technical data or information, implementation techniques, and trade secrets related to the Software, (b) any other trade

secrets marked appropriately or identified as proprietary or confidential, and (c) any information that End User, under the circumstances, should recog-

nize as confidential. Proprietary Information does not include any information that the receiving party can establish was (1) in the public domain, (2)

already in the receiving party’s possession or rightfully known prior to receipt, (3) rightfully learned from a third party not in violation of any other's pro-

prietary rights, or (4) independently developed without access to Proprietary Information.

1.3 “PSC Product” means the PSC Magellan

®

9500 series, Magellan

®

8500 series, Magellan

®

8200 series, Magellan

®

8100 series, and/or Magellan SL

®

series scanner and/or scanner/scale product, including all embedded Software in and all Documentation related to such product, which has been pur-

chased or otherwise acquired by End User, whether obtained directly or indirectly from PSC.

1.4 "Software" means any software or computer programs of PSC or its third party licensors in machine readable form which is embedded in the PSC

Product, whether obtained directly or indirectly from PSC, including any replacement, update, upgrade, enhancement or modification.

2. Scope Of License Granted.

2.1 PSC grants to End User a non-exclusive, non-transferable, perpetual license to use the Software, solely on the PSC Product in which it is embedded

(“designated PSC Product”), in machine-readable form only, solely for End User's internal business purposes. This Agreement does not convey own-

ership of the Software to End User. Title to the Software shall be and remain with PSC or the third party from whom PSC has obtained a licensed right.

As used in this Agreement, the term “purchase” or its equivalents when applied to the Software shall mean “acquire under license.” End User is not

entitled to receipt or use of the source code to any Software.

2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise reproduce or remanufacture the Software, whether modified

or unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any other person or organization, for pur-

poses other than as expressly provided in this Agreement, without PSC’s prior written consent.

3. Transfers, Support.

3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer, or other use of the Software on other than the desig-

nated PSC Product will be a material breach of this Agreement. However, PSC may elect not to terminate this Agreement or the granted licenses, but

instead may elect to notify End User that End User is deemed to have ordered and accepted a license for each breaching use. End User shall pay PSC

the applicable list price for such licenses as of the date of such breach.

3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the PSC Product to any third party unless such third party

agrees with PSC in writing to be bound by the terms and conditions of this Agreement. Any such transfer of the PSC Product absent such agreement

shall be null and void.

3.3 End User may obtain support for Software from PSC at PSC’s standard support fees and under PSC’s standard support terms and conditions in effect

at the time the support is requested.

4. Intellectual Property.

End User acknowledges that the Software constitutes valuable trade secrets of PSC or PSC’s third party licensors and that the Software is protected by intel-

lectual property laws and treaties. The license set forth in this Agreement does not transfer to End User any ownership of PSC’s or its third party licensors'

copyrights, patents, trademarks, service marks, trade secrets, or other intellectual property rights and End User shall have no right to commence any legal

actions to obtain such rights. End User shall not remove, modify, or take any other action that would obscure any copyright, trademark, patent marking, or

other intellectual property notices contained in or on the PSC Product.

5. Proprietary Information.

5.1 End User acknowledges that Proprietary Information is the confidential, proprietary, and trade secret property of PSC and PSC’s third party licensors

and End User acquires no right or interest in any Proprietary Information.

5.2 End User shall not disclose, provide, or otherwise make available the Proprietary Information of PSC or its third party licensors to any person other

than End User’s authorized employees or agents who are under confidentiality agreement, and End User shall not use the Proprietary Information

other than in conjunction with use of the PSC Product exclusively for End User’s internal business purposes. End User shall take steps to protect the

Proprietary Information no less securely than if it were End User's own intellectual property.

5.3 The provisions of this Proprietary Information Section shall survive and continue for five (5) years after the termination of this Agreement.

6. Limited Warranty.

6.1 PSC warrants that, under normal use and operation, the PSC Product will conform substantially to the applicable Documentation for the period speci-

fied in the Documentation. During this period, for all reproducible nonconformities for which PSC has been given written notice, PSC will use commer-

cially reasonable efforts to remedy nonconformities verified by PSC. End User agrees to supply PSC with all reasonably requested information and

assistance necessary to help PSC in remedying such nonconformities. For all defects reported to PSC within the warranty period, PSC’s liability is lim-

ited to providing End User with one copy of corrections or responding to End User's problem reports according to PSC's standard assistance practices.

PSC does not warrant that the product will meet End User's requirements or that use of the product will be uninterrupted or error free, or that PSC's

remedial efforts will correct any nonconformance. This limited warranty does not cover any product that have been subjected to damage or abuse,

whether intentionally, accidentally, or by neglect, or to unauthorized repair or unauthorized installation, and shall be void if End User modifies the prod-

ii Magellan

®

8100/8200

uct, uses the product in any manner other than as established in the Documentation, or if End User breaches any of the provisions of this Agreement.

6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE PSC PRODUCT IS PROVIDED “AS IS” AND PSC MAKES NO WARRANTIES OF ANY KIND,

EXPRESS OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS THE IMPLIED WARRAN-

TIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

7. Infringement.

7.1 PSC will defend End User against any claim in a lawsuit that the PSC Product furnished hereunder infringe a United States patent or copyright of a

third party and PSC will pay any damages finally awarded against End User by a court of competent jurisdiction that are attributable to such claim or

will pay End User’s part of any settlement that is attributable to such claim, provided, that 1) End User notifies PSC promptly in writing of the claim, 2)

PSC controls the defense or settlement of the claim, and 3) End User cooperates fully with PSC in such defense or settlement. All notices of a claim

should be sent to PSC Inc., Legal Department, 111 SW Fifth Ave. Suite 4100, Portland, OR 97204-3644.

7.2 In the defense or settlement of any such claim, PSC may, at its option, 1) procure for End User the right to continue using the PSC Product, 2) modify

the PSC Product so that it becomes non-infringing, 3) replace the PSC Product with an equivalent product not subject to such claim, or 4) provide End

User an opportunity to return the PSC Product and receive a refund of the purchase price paid, less a reasonable allowance for use.

7.3 PSC shall have no liability to End User for claims of infringement based upon 1) the use of any PSC Product in combination with any product which

PSC has not either furnished or authorized for use with such PSC Product 2) the use of any PSC Product designed, manufactured, or modified to the

specifications of End User, or 3) End User’s modification of the PSC Product without written authorization from PSC.

7.4 THE FOREGOING STATES PSC’S COMPLETE AND ENTIRE OBLIGATION CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTEL-

LECTUAL PROPERTY INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREEMENTS, WHETHER ORAL OR WRITTEN,

BETWEEN THE PARTIES CONCERNING SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CONTEMPORANEOUS,

OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PARTIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE

WRITING SIGNED BY BOTH PARTIES.

8. Limitation Of Liability.

EXCEPT AS PROVIDED IN SECTION 7, PSC SHALL NOT BE LIABLE FOR ANY CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO EVENT

SHALL PSC'S LIABILITY FOR DAMAGES, IF ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,

STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE PSC PRODUCT. UNDER NO

CIRCUMSTANCES SHALL PSC BE LIABLE TO END USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS

OR SERVICE, OR FOR ANY OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL, PUNITIVE, EXEMPLARY, OR OTHER SIMI-

LAR DAMAGES, EVEN IF PSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

9. Government Restricted Rights; International Use.

9.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions for computer software developed at private

expense as set forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical Data and Computer

Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.

9.2 If End User is using the PSC Product outside of the United States, End User must comply with the applicable local laws of the country in which the

PSC Product is used, with U.S. export control laws, and with the English language version of this Agreement. The provisions of the “United Nations

Convention on International Sale of Goods” shall not apply to this Agreement.

10. Termination.

10.1 Either party may terminate this Agreement or any license granted under this Agreement at any time upon written notice if the other party breaches any

provision of this Agreement.

10.2 Upon termination of this Agreement, End User immediately shall cease using any non-embedded software and shall return to PSC or destroy all non-

embedded software covered by this Agreement, and shall furnish PSC with a certificate of compliance with this provision signed by an officer or autho-

rized representative of End User. For embedded software, End User agrees to sign a waiver prepared by PSC concerning further use of the embed-

ded Software. End User’s resumed or continued use of the embedded Software after termination shall constitute End User’s agreement to be bound

by the terms and conditions of this Agreement for such use.

11. General Provisions.

11.1 Entire Agreement; Amendment. This document contains the entire agreement between the parties relating to the licensing of the Software and super-

sedes all prior or contemporaneous agreements, written or oral, between the parties concerning the licensing of the Software. This Agreement may not

be changed, amended, or modified except by written document signed by PSC.

11.2 Notice. All notices required or authorized under this Agreement shall be given in writing, and shall be effective when received, with evidence of receipt.

Notices to PSC shall be sent to the attention of Contract Administration, PSC Scanning Inc., 959 Terry Street, Eugene, OR 97402, or such other

address as may be specified by PSC in writing.

11.3 Waiver. A party’s failure to enforce any of the terms and conditions of this Agreement shall not prevent the party’s later enforcement of such terms and

conditions.

11.4 Governing Law; Venue:This Agreement and the rights of the parties hereunder shall be governed by and construed in accordance with the laws of the

State of Oregon U.S.A, without regard to the rules governing conflicts of law. The state or federal courts of the State of Oregon located in either Mult-

nomah or Lane counties shall have exclusive jurisdiction over all matters regarding this Agreement, except that PSC shall have the right, at its absolute

discretion, to initiate proceedings in the courts of any other state, country, or territory in which End User resides, or in which any of End User's assets

are located.

11.5 Attorneys’ Fees. In the event an action is brought to enforce the terms and conditions of this Agreement, the prevailing party shall be entitled to reason-

able attorneys’ fees, both at trial and on appeal.

- END -

Quick Reference Guide iii

CONTENTS

English .......................................................................................................................................1

Francais .....................................................................................................................................7

Deutsch ....................................................................................................................................13

Italiano .....................................................................................................................................19

Español ....................................................................................................................................23

Portugues ................................................................................................................................29

Chinese ....................................................................................................................................35

Appendix A - Product Labeling ...........................................................................................A-1

Appendix B - Laser Safety ...................................................................................................B-1

Appendix C — Warranty .......................................................................................................C-1

Page is loading ...

Quick Reference Guide 1

Introduction

Magellan

®

8100/8200 scanners are the world’s smallest, most versatile 360-

degree scanners designed for supermarkets, hypermarkets, and mass merchan-

disers around the globe. An enhanced optical design has been combined with

First Strike™ advanced decoding software for superior performance and pro-

ductivity. This Quick Reference Guide provides an overview of the scanner and

scanner/scale operation. For more detailed information about setup, installa-

tion and programming, see the Product Reference Guide included in PDF for-

mat on the PSC Manuals CD. Manuals are also available for download from the

PSC website (www.pscnet.com). Printed manuals may be ordered from your

dealer/distributor.

Operation

Scanning Items

To scan items using the scanner, slide or push them through the scan zone as

shown on this page. The scanner will work equally well with either a left-to-

right or right-to-left motion through the scan zone. There is rarely a need to

reorient an item’s bar code since the scanner can “see” the left, right, front and

back side, as well as the bottom of an item.

Here are some tips for best scanning

results:

• Don’t favor either the hori-

zontal or vertical scan win-

dows. Keep items in their

natural orientation.

• Remember to slide or push

items rather than picking

them up. By avoiding any

gripping, twisting and rota-

tion of your hands and

wrists, you can prevent

repetitive motion injuries.

This technique also relieves

you from possibly lifting

thousands of pounds per

day.

Vertical Window

Scan Zone

Horizontal

Window

Scan Zone

Cashier Side

Scan Zone

Note that eyes...

Indicate what the

scanner “sees.”

2 Magellan

®

8100/8200

Weighing Items

The L-shaped All-Weighs™ platter

allows you to place items anywhere

on its surface, including leaning

against its vertical section, to be

weighed accurately.

Once weighed items are in place, enter

PLU (price Look-Up) data as

described in your POS system instruc-

tions. Item weight is displayed on the Remote Display and/or the host display.

Any-WeighsTM Lift Bar—Additionally, your scanner may be equipped with the

optional Any-Weighs

 produce lift bar. In applications where there is a check-

stand or keyboard over the vertical window of the All-Weighs platter, it pro-

vides an alternative weighing solution, allowing over-sized items to be lifted

off the counter for increased weighing accuracy. The Any-Weighs produce lift

bar also helps stabilize round produce items and prevents them from rolling off

the scale when weighin. Simply raise the bar to its upright position when

needed and lower it back into the scan platter when no longer needed to main-

tain a smooth scan path.

Controls and Indicators

The control panel consists of two

indicator LEDs and two push buttons

as described below.

Indicator LEDs

The green LED indicates scanner sta-

tus, and the yellow LED is primarily

used to show scale status as

described in Table 2 below:

Scale Zero Push Button

The Scale Zero Push Button is used for multiple functions (except it has no

function in a “scanner only” model):

L-Platter

Green LED

Yellow LED

Volume/Tone Push Button

Scale Zero Push Button

Speaker

Quick Reference Guide 3

Table 1. Scale Zero Push Button Functions

Table 2. Green and Yellow LED Functions

PRESS

DURATION

FUNCTION COMMENT

Momentary Zero Scale

When programmed to do so, the yellow LED should be

lit when no weight is on the scale, indicating scale at

zero. If it is not, press the switch to zero the scale. The

unit will sound a “click” upon pressing the button.

4 Seconds

Scale Diag-

nostics Mode

a

a. By standard default, this function is normally disabled to prevent accidental activation

by users.

This mode allows system support personnel to trouble-

shoot problems with the scale. Momentarily press the

Scale Zero Push Button or cycle power to exit Scale

Diagnostics Mode.

LED

INDICATION

DURATION COMMENT

Scale at Zero

a

Yellow LED on steady

The scale is at rest and reads zero

weight.

Scanner Active

a

Green LED on steady and dim The scanner is ready for operation.

Scanning is immediately available.

Good Read

Indication

a

Green LED - bright flash

Indicates a bar code has been read

and decoded.

Program Mode

Indication

Green LED - Continuous flash-

ing

Indicates the scanner is in Label Pro-

gramming Mode. Cycle power to exit

Programming Mode.

Sleep Mode

Indication

Green LED blinks at a

2-second rate

The scanner motor and/or laser have

automatically switched off and the unit

has entered Sleep Mode due to

extended inactivity.

Host Disabled

1 second off, 1/10 second on

Host has disabled scanning.

4 Magellan

®

8100/8200

Volume/Tone Push Button

The Volume/Tone Push Button also performs multiple functions depending

upon the duration of time it is pressed:

Table 3. Volume/Tone Push Button Functions

Field Replace-

able Unit (FRU)

Warning (Error

Mode)

Audible low tone 1 second.

Alternating Green/Yellow LED

flashes continuously.

Serves notice that a fatal FRU failure

has been detected. If a low tone is

heard, but continuous flashing is not

observed, the scanner can still func-

tion in a limited capacity. Call systems

support for service in either case.

FRU Indication

Green LED flashes a coded

sequence in concert with the

speaker.

Occurs ONLY upon Volume/Tone but-

ton push following a FRU warning.

Enables service technicians to identify

FRU failures.

a. Certain functions of the Green and Yellow LEDs are selectable to be enabled or disabled.

Your scanner may not be programmed to display all indications.

PRESS

DURATION

FUNCTION COMMENT

Momentary

(when scanner is

asleep)

Wakes scanner from

Sleep Mode

Alternatively, the scanner can be awakened

by:

- Moving an object through the scan zone.

- A weight change on the scale.

- Scanning with an attached auxiliary scanner.

Momentary

(when scanner is

awake)

Increments volume

Press the push button momentarily to

increase speaker volume. When the loudest

volume is reached, a repeated press of the

push button cycles volume back to the lowest

setting, then volume increases on subsequent

press(es). Five volume levels are available.

LED

INDICATION

DURATION COMMENT

Quick Reference Guide 5

Productivity Index Reporting Option —Your 8200 scanner may be equipped with the

optional Productivity Index Reporting™ feature. This feature allows for data

collection on the readability index of bar codes scanned by the scanner. This

data may be transmitted to the POS Terminal where it may be easily sorted for

action by the MIS department to improve bar code quality at the front end.

For additional information on how to enable Productivity Index Reporting in

your scanner, please refer to the Product Reference Guide (PRG).

Hold, then

release when the

beeper sounds

Increments tone

Press the push button for approximately 2 sec-

onds, then release. Each time this is done, the

beeper will sound at one of three tones. Stop

when the desired tone (high, medium or low)

is sounded.

4 Seconds

Scanner Diagnostics

Mode

a

This mode allows system support personnel to

troubleshoot problems with the scanner. Press

the button for eight seconds or cycle power to

exit Scanner Diagnostics Mode and reset the

scanner.

8 Seconds

Resets Scanner

b

Only system support personnel should per-

form a reset.

a. By standard default, this function is normally disabled to prevent accidental activation

by users.

b. Users should not perform scanner resets except under the direction of trained sys-

tems support personnel.

PRESS

DURATION

FUNCTION COMMENT

Page is loading ...

Quick Reference Guide A-1

Appendix A — Product Labeling

U.S., CANADA, MEXICO AND JAPAN

IEC

LASER

PRODUCT

6-0944

+12V

SUPPL

Y

+5

V

SUP

P

L

Y

UP

T

O SPEE

D

MO

T

O

R

ENA

B

L

E

L

ASE

R

L

I

F

E

U.S., CANADA, MEXICO AND JAPAN

Class IIa Laser Product. Avoid long term viewing of direct laser light.

Appareil à laser de classe IIa. Éviter toute exposition prolongée de

la vue à lumière laser directe.

Clase IIa Producto Laser. Traté de no ver directamente

él Rayo Laser por muchó tíempo.

IIa

IEC CLASS 1

LASER

PRODUCT

Scanner/Scale

ONLY

m

a

x

n

=

3

0

m

in

e

=

.0

1 l

b

AM-5011

U

K

xxxx

C

A

PA

CI

T

E

9.

99

5

x

.00

5

kg

C

APA

C

I

T

Y

30.

00

x .0

1

l

b

III

This illustration shows label

placement ONLY. For actual

regulatory, patent and other

applicable information, view the

labels on the product itself, or call

your nearest sales or service office.

PSC Scanning, Inc.

959 Terry Street

Eugene, Oregon, USA 97402

SCANNER/SCALE MODEL 38x

PSC CLASS:XXXXXX-XXXXX-XX

Manufacture Date: April 199x

PSC S/N: xxxxxxx

MAGELLAN

PSC

SERIAL NUMBER BARCODE

P

S

C

IN

C

.

9

5

9

T

e

rr

y

S

tre

e

t

E

U

G

E

N

E

, O

R

EG

O

N

,

U

S

A

9

740

2

S

C

A

N

E

R

/

S

C

A

L

E

M

O

D

E

L

3

8

x

P

S

C

L

A

S

:

X

-

X

-

X

M

A

N

U

F

A

C

T

U

RED

:

A

p

ril,

1

9

9x

P

S

C

S

/

N

:

x

xx

M

A

G

E

L

LA

N

S

L

®

S

E

R

IA

L

N

U

M

B

ER

B

A

R

C

O

D

E

8200

max

n =

min

e =

CAPACITE

CAPACITY

III

PSC Scanning, Inc.

959 Terry Street

Eugene, OR 97402 USA

Product of USA

CLASS 1 LASER PRODUCT

LASER KLASSE 1

• CAUTION-LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM

• PRECAUCION-RADIACION LASER SI SE ABRE. ¡NO MIRE HACIA EL RAYO!

• CUIDADO - RADIA=C7=C3O LASER QUANDO ABERTO. N=C3O OLHE PARA O RAIO.

• VARO-LASERSÄTEILY, JOS AVOINNA. ALA TUIJOTA SATEESEEN.

• FARLIGTI-LASERSTRÅLNING OM ÖPPET. STIRRA EJ IN I STRÅLEN.

• ADVARSELI LAERSTRALING VED ABNING. SE IKKE IND I STRALEN.

•

• VORSICHT-NACH Ö

•

• FARE! - LASERSTRÅLING NÅR ÅPEN. STIRR IKKE IN I STRÅLEN.

•

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received,

including interference that may cause undesired operation.

COVERED BY ONE OR MORE OF THE FOLLOWING U.S. PATENTS: 4,709,369 4,749,879 4,792,666 4,798,943 4,799,164 4,861,972 4,861,973

4,866,257 4,868,836 4,879,456 4,963,719 4,991,692 5,144,118 5,179,270 5,198,649 5,229,588 5,410,108 5,459,308 5,440,110 5,475,207

5,493,108 5,705,802 5,723,852 5,834,708 5,929,421 6,059,189 6,237,852 RE37,166 OTHER PATENTS PENDING

THIS LASER PRODUCT COMPLIES WITH 21CFR 1040

AS APPLICABLE AS A CLASS IIA PRODUCT

U S

ACN 073200496

Remote Display

0.00

Power EAS InterlockScale Host POS TerminalAux. Port

NRTL

S

afety

tested

Prod

uction

monitored

PRODUCT SERVICE

B-1 Magellan

®

8100/8200

Appendix B — Laser Safety

International Caution Statements

Class I

English

This scanner is certified in the U.S. to conform to the requirements of DHHS/

CDRH 21CFR Subchapter J and to the requirements of IEC 825-1:2001.

Class I and Class IIa products are not considered to be hazardous. The scanner

contains internally a Visible Laser Diode (VLD) whose emissions do not exceed

the maximum limits as set forth in the above regulations. The scanner is

designed so that there is no human access to harmful laser light during normal

operation, user maintenance or during prescribed service operations.

CAUTION

• Use of controls or adjustments or performance of procedures other

than those specified herein may result in hazardous laser light.

• Do not attempt to open or otherwise service any component in the

optics cavity. Opening or servicing any part of the optics cavity by

unauthorized personnel may violate laser safety regulations. The

optics system is a factory only repair item.

• Use of optical instruments with the scanner will increase eye hazard.

Optical instruments include binoculars, microscopes and magnifying

glasses. This does not include eye glasses worn by the user.

French

Ce scanner est certifié conforme à la norme DHHS/CDRH 21CFR sous-chapitre

J et à la norme IEC 825-1:2001.

Les produits de classe I et de classe II ne sont pas considérés dangereux. Le

scanner contient une diode laser visible (VLD) dont les émissions ne dépassent

pas les limites prescrites dans les normes précitées. Le scanneur est conçu de

façon à ce qu’il ne soit pas possible d’accéder à la lumière laser pendant l’utili-

sation normale, l’entretien par l’utilisateur et les fonctions de maintenance pre-

scrites.

ATTENTION

• L’utilisation de procédures de contrôle, réglage ou utilisation autres

que celles spécifiées dans ce document peut entraîner une exposition

dangereuse à la lumière du laser.

• Ne pas essayer d’ouvrir ni de réparer les composants de la cavité

optique. L’ouverture ou la réparation d’une partie de la cavité optique

par une personne non qualifiée peut entraîner la violation des règles de

Page is loading ...

B-7 Magellan

®

8100/8200

Chinese

Japanese

Quick Reference Guide B-8

Hebrew

C-1 Magellan

®

8100/8200

Appendix C — Warranty

Warranty

PSC warrants to Customer that PSC's products will be free from defects in materials and workmanship for a period of 1 year

from product shipment. In order to obtain service under this Warranty, Customer must notify PSC of the claimed defect before the

expiration of the Warranty period and obtain from PSC a return authorization number for return of the product to designated PSC

service center. If PSC determines Customer’s claim is valid, PSC will repair or replace product without additional charge for parts

and labor. Customer shall be responsible for packaging and shipping the product to the designated PSC service center, with

shipping charges prepaid. PSC shall pay for the return of the product to Customer if the shipment is to a location within the coun-

try in which the PSC service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and

any other charges for products returned to any other locations.

Warranty is subject to the limitations and exclusions set forth in the paragraphs that follow.

WARRANTY SET FORTH ABOVE IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING MER-

CHANTABILITY AND FITNESS.

Exclusions

Warranty coverage shall not apply to any claimed defect, failure or damage which PSC determines was caused by: abuse,

neglect, improper use of product; failure to provide product maintenance, including but not limited to cleaning of the display in

accordance with product reference guide; installation or service of product by other than PSC representatives; use of product

with any other instrument, equipment or apparatus; modification or alteration of product or units with Warranty Void labels that

have been tampered with. External cables and replacement of upper window/cartridge due to scratching, stains or other degra-

dation will not be covered under the Warranty. External power supplies returned for service must be accompanied by the original

product for performance of service.

Returned products that PSC inc. has determined are not covered by Warranty, will be charged PSC Inc. standard repair rates

then in effect for repair of product. Replacement of display due to scratching, stains or other degradation will not be covered

under Warranty. If a product is determined to be not repairable customer will be notified and product may be returned to cus-

tomer at their request. A minimum repair fee may be charged.

Limitation of Liability

PSC's REPAIR OR REPLACEMENT OF DEFECTIVE PRODUCT AS SET FORTH ABOVE IS THE CUSTOMER’S SOLE AND

EXCLUSIVE REMEDY ON ACCOUNT OF CLAIMS OF BREACH OF WARRANTY OR PRODUCT DEFECT. UNDER NO CIR-

CUMSTANCES WILL PSC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCI-

DENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES REGARDLESS OF WHETHER PSC HAD

ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.

Assignment

Customer may not assign or otherwise transfer its rights or obligations under Warranty except to a purchaser or transferee of

product. No attempted assignment or transfer in violation of this provision shall be valid or binding upon PSC.

Risk of Loss

Customer shall bear risk of loss or damage for product in transit to PSC. PSC shall assume risk of loss or damage for product in

PSC's possession or product being returned to Customer by PSC, except such loss or damage as may be caused by the negli-

gence of Customer, its agents or employees. In the absence of specific written instructions for the return of product to Customer,

PSC will select the carrier, but PSC shall not thereby assume any liability in connection with the return shipment.

DECLARATION OF CONFORMITY

PSC hereby declares that the Equipment specified below has been

tested and found compliant to the following Directives and Standards:

Directives:

EMC 89/336/EEC

Low Voltage 73/23/EEC

Non-Automatic Weighing Instruments 90/384/EEC

Standards:

EN55022-B:1994/1998 - Generic Emission

EN50082-1:1998 - Generic Immunity - Light Industry

EN55024:1998 - Generic Immunity - ITE

EN60950:1995 - ITE Safety

EN60825-1:1994 - Laser Safety

EN45501 - Weighting

OIML R76 - Weighting

EN61000-3-2:1994 - Harmonic Current

EN61000-3-2:1994 - Flicker

Equipment Type: Barcode Scanning and Weighing Equipment

Interface Protocol: RS232, OCIA, MDL, USB, and 4683

Product:

Magellan

®

8100/8200

Brad West

Vice President

Quality and Process Management

PSC, Inc.

959 Terry Street

Eugene, OR 97402

U.S.A.

Peter Lomax

Vice President

Europe, Middle East & Africa

PSC Bar Code Ltd.

Axis 3, Rhodes Way

Watford

Hertfordshire WD24 4TR

UK

Asia Pacific

PSC Hong Kong

Hong Kong

Telephone: [852]-2-584-6210

Fax: [852]-2-521-0291

Australia

PSC Asia Pacific Pty Ltd.

North Ryde, Australia

Telephone: [61] 0 (2) 9878 8999

Fax: [61] 0 (2) 9878 8688

France

PSC S.A.R.L.

LES ULIS Cedex, France

Telephone: [33].01.64.86.71.00

Fax: [33].01.64 46.72.44

Germany

PSC GmbH

Darmstadt, Germany

Telephone: 49 (0) 61 51/93 58-0

Fax: 49 (0) 61 51/93 58 58

Italy

PSC S.p.A.

Vimercate (MI), Italy

Telephone: [39] (0) 39/62903.1

Fax: [39] (0) 39/6859496

Japan

PSC Japan K.K.

Shinagawa-ku, Tokyo, Japan

Telephone: 81 (0)3 3491 6761

Fax: 81 (0)3 3491 6656

Latin America

PSC S.A., INC.

Miami, Florida, USA

Telephone: (305) 539-0111

Fax: (305) 539-0206

United Kingdom

PSC Bar Code Ltd.

Watford, England

Telephone: 44 (0) 1923 809500

Fax: 44 (0) 1923 809 505

PSC Inc.

959 Terry Street

Eugene, OR

Telephone: (541) 683-5700

Fax: (541) 345-7140

www.pscnet.com

PSC Magellan 8200 User manual

This manual is also suitable for

PSC Magellan 8200 User manual

in other languages

Related papers

Other documents