Rheem CMR50245 User manual

Category
Water heaters & boilers
Type
User manual

Rheem CMR50245 is a residential electric water heater with a 40-gallon capacity. It is designed to provide hot water for a variety of household applications, including showering, bathing, and dishwashing. The heater is made of durable materials, including a seamless, blow-molded, polybutylene tank that is impervious to rust and corrosion. It also features multiple layers of filament wound fiberglass for added strength. The Rheem CMR50245 is easy to install and maintain, with factory-installed temperature and pressure relief valves for greater value and security.

Rheem CMR50245 is a residential electric water heater with a 40-gallon capacity. It is designed to provide hot water for a variety of household applications, including showering, bathing, and dishwashing. The heater is made of durable materials, including a seamless, blow-molded, polybutylene tank that is impervious to rust and corrosion. It also features multiple layers of filament wound fiberglass for added strength. The Rheem CMR50245 is easy to install and maintain, with factory-installed temperature and pressure relief valves for greater value and security.

Your Marathon is warranted not to leak for as long as you own your home*
The Marathon offers this no-leak promise because of its superior, non-metallic PermaGuard
tank construction…A seamless blow molded polybutylene inner tank with a filament wound
fiberglass outer tank for maximum strength. Superior performance, high-efficiency and low
operating cost…for a lifetime*!
*See Residential Warranty Information Brochure at your dealer for complete warranty information.
C
5-3/4"
A B
TANK CAPACITY ROUGHING IN DIMENSIONS (SHOWN IN INCHES) SHIPPING WEIGHT
ELEMENT TANK HEIGHT TO
IMPERIAL WATTAGE HEIGHT WATER CONN. DIAMETER
MODEL NUMBER GALLONS LITRES @ 240 VOLTS AMPERAGE A B C LBS. KG
CMR50245 40 180 4500/4500 18.75 62-3/4 66-3/4 23-1/2 103 46.7
CMR75245 60 270 4500/4500 18.75 58-1/2 62-1/2 28-1/4 127 57.6
MARATHON
Residential Electric Water Heaters
Available in 40 and 60 Imperial Gallon Electric Models
Lifetime Limited Tank Warranty*
5 Year Limited Parts Warranty*
The seamless, blow-molded, polybutylene
tank is impervious to rust and corrosion
Multiple layers of filament wound fiberglass
give the tank unmatched strength
The tank is designed, built and warranted
not to leak “for as long as you own your
home”
Envirofoam insulation is free of ozone
depleting CFC’s and HCFC’s so it saves
the planet and it saves energy
Pipe wrap energy kit included to reduce
heat loss from plumbing lines
Recessed drain valve is out of the way of
brooms and scrubbers
Tough molded outer shell resists dents and
scratches
Factory installed temperature and pressure
relief valve for greater value and security
Conduit between control boxes facilitates
wiring for “off-peak” use
All plastic tank eliminates the need for an
anode rod – preventing potential odor
problems
C191.1 CSA Energy Efficiency
*See Residential Warranty Information Brochure for
complete warranty information.
Rheem Manufacturing Company • Water Heater Division
Rheem Canada Ltd.,128 Barton Street West, Hamilton, Ontario L8N 3P3
Customer Service 1-800-268-6966
Warranty 1-800-263-8342
FORM NO. 101-42CAN Rev.1 09/05 WP
In keeping with its policy of continuous progress and product improvement, Rheem reserves the right to make changes without notice.
EST. 1947
RHEEM
CANADA
LTD/LTÉE
THANKS TO OUR EMPLOYEES
WE ARE
ISO9002
REGISTERED
CONSTRUCTION FEATURES
1. Energy Saving Pipe Wrap Kit – reduces heat loss through plumbing
lines.
2. Temperature and Pressure Relief Valve – factory installed.
3. Water Tight Grommets – keep out overhead moisture and condensation.
4. Seamless Molded Non-metallic Inner Tank – can’t rust or corrode.
5. Fill Tube high temperature material to withstand thermal storage and
other high temperature applications.
6. High-tech Heating Elements – upper element fused to protect tank
against “dry fire”. Bottom element low watt, stainless steel for long life.
7. Polyethylene Outer Jacket – resists dents and scratches during transit,
installation and beyond.
8. Envirofoam™ a great energy saver and friendly to the ozone layer.
It’s made without CFC’s and HCFC’s.
9. Fiberglass Tank has unmatched strength.
10. Recessed Drain Valve – protected from damage.
  • Page 1 1

Rheem CMR50245 User manual

Category
Water heaters & boilers
Type
User manual

Rheem CMR50245 is a residential electric water heater with a 40-gallon capacity. It is designed to provide hot water for a variety of household applications, including showering, bathing, and dishwashing. The heater is made of durable materials, including a seamless, blow-molded, polybutylene tank that is impervious to rust and corrosion. It also features multiple layers of filament wound fiberglass for added strength. The Rheem CMR50245 is easy to install and maintain, with factory-installed temperature and pressure relief valves for greater value and security.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI