RCA J22H760 User manual

Category
LCD TVs
Type
User manual

This manual is also suitable for

LCD Television
User’s Guide
Hospital
J22H760
J32H700
J26H700
J42H750
Changing Entertainment. Again.
Important Information
2
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, with-
in an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral tri-
angle is intended to alert the user to the pres-
ence of important operating and maintenance
(servicing) instructions in the literature accompa-
nying the appliance.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CC AA UUTT II OO NN
TO PREVENT FIRE OR
SHOCK HAZARDS, DO NOT
EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
WARNING
Please fill out the product registration card (packed separately) and return
it immediately. For US customers: Your RCA Consumer Electronics product
may also be registered at http://www.rcacommercialtv.com. Registering this
product allows us to contact you if needed.
Product Registration
This reminder is provided to call the CATV system installer’s attention to
Article 820-40 of the National Electric Code (U.S.A.). The code provides
guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as
close to the point of the cable entry as practical.
NOTE TO CABLE TV INSTALLER
Keep your sales receipt to obtain warranty parts and service and for proof
of purchase. Attach it here and record the serial and model numbers in
case you need them. These numbers are located on the product.
Model No.
Serial No.
Purchase Date:
Dealer/Address/Phone:
Product Information
Important Information
3
Do not attempt to modify this product in any way without written authorization from RCA.
Unauthorized modification could void the user’s authority to operate this product.
CAUTION
THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE
THE RISK OF ELECTRIC SHOCK, DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE
OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
CAUTION
Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall
not be placed on the apparatus.
WARNING
When used outside of U.S., other power supply cords may be used if the cord is approved by the local regu-
lating agency.
CAUTION
Clean the exterior of this television by removing dust with a lint-free cloth.
CAUTION: To avoid damage to the surface of the television, do not use abrasive or chemical cleaning agents.
CLEANING AND DISINFECTION
This apparatus with class I construction shall be connected to a main socket outlet with a protective earthing
connection.
Important Information
4
Main plug is the disconnecting device. The plug must remain readily operable.
DISCONNECTING DEVICE FROM MAINS
YOUR PRODUCT HAS BEEN MANUFACTURED AND TESTED WITH YOUR SAFETY IN MIND. HOWEVER,
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. TO AVOID DEFEATING
THE SAFEGUARDS THAT HAVE BEEN BUILT INTO YOUR NEW PRODUCT, PLEASE READ AND OBSERVE THE
FOLLOWING SAFETY POINTS WHEN INSTALLING AND USING YOUR NEW PRODUCT, AND SAVE THEM FOR
FUTURE REFERENCE. OBSERVING THE SIMPLE PRECAUTIONS DISCUSSED IN THIS MANUAL CAN HELP YOU
GET MANY YEARS OF ENJOYMENT AND SAFE OPERATION THAT ARE BUILT INTO YOUR NEW PRODUCT.
IMPORTANT SAFEGUARDS FOR YOU AND YOUR NEW PRODUCT
Note
-If the TV feels cold to the touch, there may be a small “flicker” when it is turned on. This is normal, there
is nothing wrong with the TV.
- Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots.
However, they have no adverse effect on the TVs performance.
-Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may
produce some temporary distortion effects on the screen.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
REGULATORY INFORMATION
Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
(RCA Commercial Electronics)
(TELEPHONE NO : 1-800-RCA-2161)
CAUTION
5
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radi-
ators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other.
A grounding type plug has two blades and a
third grounding prong. The wide blade or the
third prong is provided for your safety. If the
provided plug does not fit into your outlet, con-
sult an electrician for replacement of the obso-
lete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience recep-
tacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tri-
pod, bracket, or table specified by
the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as powersupply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15. If an outside antenna or cable system is connect-
ed to the product, be sure the antenna or cable
system is grounded so as to provide some pro-
tection against voltage surges and built-up static
charges. Section 810 of the National Electrical
Code, ANSI/NFPA No. 70-1984 (Section 54 of
Canadian Electrical Code, Part 1) provides infor-
mation with respect to proper grounding of the
mast and supporting structure, grounding of the
leadin wire to an antenna-discharge unit, size of
grounding conductors, location of antenna-dis-
charge unit, connection to grounding electrodes,
and requirements for the grounding electrode.
See following example.
Note
- The lamp in this product contains mercury. Please dispose of in accordance with local, state, or federal
laws.
Table of Contents
6
Important Information ..............................................2
IMPORTANT SAFETY INSTRUCTIONS ........................5
Chapter 1: Connections and Setup
Things to Consider Before You Connect ..................7
Protect Against Power Surges ........................7
Protect Devices from Overheating..................7
Position Cables Properly to Avoid Audio
Interference ......................................................7
Use Indirect Light ............................................7
Remote Control ................................................7
Check Supplied Parts........................................7
Controls And Connectors ..........................................8
Front Panel - J22H760 ......................................8
Rear Panel - J22H760 ......................................9
Front Panel - J26H700 ....................................10
Rear Panel - J26H700 ....................................11
Front Panel - J32H700 ....................................12
Rear Panel - J32H700 ....................................13
Front Panel - J42H750 ....................................14
Rear Panel - J42H750 ....................................15
Connections ..............................................................16
Vesa Standard TV Mounts ............................16
Antenna Connection......................................18
VCR Connection..............................................20
DVD Connection ............................................22
HDSTB Connection ........................................23
External A/V Source........................................26
Digital Audio Out ..........................................27
Pillow Speaker Wiring....................................28
PC Connection ................................................29
Resolution ......................................................31
USB in Setup ..................................................32
Headphone ....................................................32
Chapter 2: Using the Remote Control
Basic(User) Remote ........................................33
Master(Installer) Remote ..............................34
Put Batteries in the Remote ..........................34
Chapter 3: Using USB Clone Tool
USB Cloner Out-looking ................................35
Errors Table ....................................................35
Learning Connection ....................................36
Teaching Connection......................................37
Chapter 4: Basic Operation
Plug in the TV ................................................38
Turn on the TV................................................38
Channel Scan ..................................................38
Channel Selection ..........................................38
Volume Adjustment ......................................38
Sound Mute ....................................................38
Source Selection ............................................39
Language Selection........................................39
Chapter 5: Commercial Interface Menus
Commercial Interface Menus ..................................40
Chapter 6: Using the TV's Features
On Screen Menus ....................................................44
Setting up the TV Channel ....................................45
Auto Scan........................................................45
Add / Delete a Channel..................................46
Picture Controls ........................................................47
Adjusting The Picture Controls ....................47
Manual Picture Controls ................................48
Gamma............................................................49
Color Temperature ........................................50
Reset Picture Mode ........................................51
Advanced Video ......................................................52
Dynamic Noise Reduction ..............................52
CTI (Color Transient Intensity) ......................53
Flesh Tone ......................................................53
Adaptive Luma Control..................................54
Blue Mute ......................................................54
Back Light ......................................................55
Screen Mode ..................................................56
Sound Controls ........................................................57
Adjusting The Sound Controls ......................57
Manual Sound Controls ................................58
Sound Surround ............................................59
Equalizer ........................................................59
Digital Output ................................................60
Stereo/SAP Broadcast Setup ..........................61
Audio Language ............................................61
Time Setting ............................................................62
Time Zone Settings ........................................62
Auto Time Settings ........................................63
Manual Time Settings ....................................64
Auto On /Off Time Settings ..........................65
Sleep Timer ....................................................66
Captions ....................................................................67
Closed Caption - Analog................................67
Closed Caption - Digital ................................68
Digital Closed Caption Options ....................69
Reset ........................................................................70
Reset Default ..................................................70
Parental Control ......................................................71
Entering your password ................................71
Set Password ..................................................71
Ratings - Enable / Disable ..............................72
TV Ratings for USA ........................................73
Movie Ratings ................................................75
English TV Ratings for Canada ......................76
French TV Ratings for Canada ......................77
Downloadable Rating ....................................78
Block Unrated ................................................79
Clean All..........................................................79
Setting the PC Mode................................................80
Automatic Screen Adjustment ......................80
Manual Screen Adjustment ..........................81
USB Functions ..........................................................82
Picture Function ............................................82
Music Function ..............................................83
Specification ............................................................84
Chapter 7: Other Information
Troubleshooting ......................................................88
Limited Warranty ....................................................89
Care and Cleaning ....................................................90
CHILD SAFETY ..........................................................91
Graphics contained within this publication are for representation only.
Chapter 1 7
Chapter 1: Connections and Setup
Things to Consider Before You Connect
Connect all devices before you plug any of their power cords into the wall outlet or power strip. NEVER
plug your TV into an outlet that is controlled by a wall switch.
•Turn off the TV and/or device(s) before you connect or disconnect any cables.
Make sure all antennas and cables are properly grounded. Refer to the Important Safety Instructions at
the beginning of the User's Guide.
Protect Against Power Surges
Don’t block ventilation holes on any of the devices. Arrange the devices so that air can circulate freely.
Don’t stack devices.
If you place devices in a stand, make sure you allow adequate ventilation.
If you connect an audio receiver or amplifier, place it on the top shelf so the heated air from it won’t flow
around other devices.
Protect Devices from Overheating
Insert each cable firmly into the designated jack.
If you place devices above the TV, route all cables down the side of the back of the TV instead of straight
down the middle.
If your antenna uses 300-ohm twin lead cables, do not coil the cables. Also, keep the twin lead cables
away from audio/video cables.
Position Cables Properly to Avoid Audio Interference
Don’t place the TV where sunlight or room lighting will be directed toward the screen. Use soft or indirect
lighting.
Use Indirect Light
You will need a master remote or USB Cloner to set up the TV. Contact your RCA Commercial Distributor to
purchase these.
Remote Control
Check that the following parts were packed with your product.
Check Supplied Parts
Power Cord Owner’s Manual
1 2 3
4 5 6
7 8 9
0
SYSTEM
GUIDESLEEPSKIP
CCGO BACK
ANTENNAINPUT
SOUND
MENU OK INFO
CLEAR
MUTE
CH
VOL VOL
CH
ON-OFF
C O M M E R C I A L
R130K1
Remote (Optional)
Note
- If you need to replace your remote, call 1-800-RCA-2161. A shipping and handling fee, and the appropri-
ate sales tax, will be charged upon ordering. Have your Visa, MasterCard, or Discover Card ready.
"User must use shielded signal interface cables with ferrite cores to maintain standard compliance for the product"
Chapter 1: Connections and Setup
Chapter 18
Front Panel - J22H760
1. VOL- / VOL+
Adjusts sound level and menu settings.
2. CH / CH
Select a channel.
3. SOURCE
Selects the TV, AV1, AV2, YPbPr, VGA, HDMI or USB mode.
4. MENU
Display on screen menus.
5. POWER
Switches the set on or off.
6. Power Indicator
Illuminates to bright blue when the TV is on. When the TV is powered off, this LED is also off.
Remote control sensor
Accepts the IR signal of remote controller.
6
1 2 3 4 5
VOL
SOURCE
MENU
CH
Note
- Image shown may differ from your TV.
Chapter 1: Connections and Setup
Chapter 1 9
Rear Panel - J22H760
1. AC IN
This TV operates on AC power.
2. HDMI/DVI IN
Connect to the HDMI jack on devices with an
HDMI output.
This input can also be used as a DVI connection
with separate analog audio inputs.
3. RGB IN (PC)
Connect to the video output jack on your PC.
4. COMPONENT IN (YPbPr)
Video/Audio inputs for Component.
5. SERVICE
Used by clone device to learn settings in TV.
6. SPEAKER SWITCH
Used to select the speaker output type.
7. AV1
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
8. SELECTION SWITCH
Selects the protocols and logic levels used on the
pillow-speaker port.
Warning
This switch controls the voltage levels used to
power an external pillow speaker. It allows the
television to interface to different pillow speaker
types(RCA, LG/Zenith, Philips). Setting this switch
incorrectly could damage your pillow speaker
device.
9. AUDIO IN (RGB/DVI)
Connect to the audio output jack on your PC.
10.PILLOW JACK IN
Used to connect to pillow speaker.
11.ANTENNA/CABLE IN
Connect to your antenna or cable box for TV sig-
nal.
12.DIGITAL AUDIO OUT(COAXIAL)
Connect digital audio to various types of equip-
ment.
13.USB IN
USB device interface.
14.AV2
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
15.Headphone
Connect the headphone plug to this socket.
13
15
14
VIDEO
L-AUDIO-R
AV2
H/P
USB IN
HDMI/DVI
IN
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
3 9 1110 122
VIDEO
YPbPr
LR
COMPONENT IN
AUDIO
4 7 851
AC IN
SERVICE
PILLOW JACK IN
SPEAKER
SWITCH
PILLOW
SPEAKER
NORMAL
SPEAKER
AV1
AUDIO
L
VIDEO
R
6
ZEN PLS OFF RCA
Note
- Image shown may differ from your TV.
Chapter 1: Connections and Setup
Chapter 110
Front Panel - J26H700
SOURCE
MENU
VOL
CH
6
1 2 3 4 5
SOURCE
MENU
VOL
CH
Note
- Image shown may differ from your TV.
1. VOL- / VOL+
Adjusts sound level and menu settings.
2. CH / CH
Select a channel.
3. SOURCE
Selects the TV, AV1, AV2, YPbPr, VGA, HDMI or USB mode.
4. MENU
Display on screen menus.
5. POWER
Switches the set on or off.
6. Power Indicator
Illuminates to bright blue when the TV is on. When the TV is powered off, this LED is also off.
Remote control sensor
Accepts the IR signal of remote controller.
Chapter 1: Connections and Setup
Chapter 1 11
Rear Panel - J26H700
1. AC IN
This TV operates on AC power.
2. HDMI/DVI IN
Connect to the HDMI jack on devices with an
HDMI output.
This input can also be used as a DVI connection
with separate analog audio inputs.
3. RGB IN (PC)
Connect to the video output jack on your PC.
4. COMPONENT IN (YPbPr)
Video/Audio inputs for Component.
5. AV1
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
6. AUDIO IN (RGB/DVI)
Connect to the audio output jack on your PC.
7. ANTENNA/CABLE IN
Connect to your antenna or cable box for TV sig-
nal.
8. DIGITAL AUDIO OUT(COAXIAL)
Connect digital audio to various types of equip-
ment.
9. SERVICE
Used by clone device to learn settings in TV.
10.SPEAKER SWITCH
Used to select the speaker output type.
11.SELECTION SWITCH
Selects the protocols and logic levels used on the
pillow-speaker port.
Warning
This switch controls the voltage levels used to
power an external pillow speaker. It allows the
television to interface to different pillow speaker
types(RCA, LG/Zenith, Philips). Setting this switch
incorrectly could damage your pillow speaker
device.
12.PILLOW JACK IN
Used to connect to pillow speaker.
13.USB IN
USB device interface.
14.AV2
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
R - AUDIO - L
AV2
VIDEO
USB IN
13
14
HDMI/DVI
IN
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
3 6 7 8 12111092
VIDEO
YPb Pr
LR
COMPONENT IN
AUDIO
AV1
AUDIO
L
VIDEO
R
4 51
AC IN
SERVICE
SPEAKER
SWITCH
PILLOW
SPEAKER
NORMAL
SPEAKER
PILLOW JACK IN
ZEN PLS OFF RCA
Note
- Image shown may differ from your TV.
Chapter 1: Connections and Setup
Chapter 112
Front Panel - J32H700
SOURCE
MENU
VOL
CH
6
1 2 3 4 5
SOURCE
MENU
VOL
CH
Note
- Image shown may differ from your TV.
1. VOL- / VOL+
Adjusts sound level and menu settings.
2. CH / CH
Select a channel.
3. SOURCE
Selects the TV, AV1, AV2, YPbPr, VGA, HDMI or USB mode.
4. MENU
Display on screen menus.
5. POWER
Switches the set on or off.
6. Power Indicator
Illuminates to bright blue when the TV is on. When the TV is powered off, this LED is also off.
Remote control sensor
Accepts the IR signal of remote controller.
Chapter 1: Connections and Setup
Chapter 1 13
Rear Panel - J32H700
1. AC IN
This TV operates on AC power.
2. HDMI/DVI IN
Connect to the HDMI jack on devices with an
HDMI output.
This input can also be used as a DVI connection
with separate analog audio inputs.
3. RGB IN (PC)
Connect to the video output jack on your PC.
4. COMPONENT IN (YPbPr)
Video/Audio inputs for Component.
5. AV1
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
6. AUDIO IN (RGB/DVI)
Connect to the audio output jack on your PC.
7. ANTENNA/CABLE IN
Connect to your antenna or cable box for TV sig-
nal.
8. DIGITAL AUDIO OUT(COAXIAL)
Connect digital audio to various types of equip-
ment.
9. SERVICE
Used by clone device to learn settings in TV.
10.SPEAKER SWITCH
Used to select the speaker output type.
11.SELECTION SWITCH
Selects the protocols and logic levels used on the
pillow-speaker port.
Warning
This switch controls the voltage levels used to
power an external pillow speaker. It allows the
television to interface to different pillow speaker
types(RCA, LG/Zenith, Philips). Setting this switch
incorrectly could damage your pillow speaker
device.
12.PILLOW JACK IN
Used to connect to pillow speaker.
13.USB IN
USB device interface.
14.AV2
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
R - AUDIO - L
AV2
VIDEO
USB IN
13
14
HDMI/DVI
IN
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
3 6 7 8 12111092
VIDEO
YPb Pr
LR
COMPONENT IN
AUDIO
AV1
AUDIO
L
VIDEO
R
4 51
AC IN
SERVICE
SPEAKER
SWITCH
PILLOW
SPEAKER
NORMAL
SPEAKER
PILLOW JACK IN
ZEN PLS OFF RCA
Note
- Image shown may differ from your TV.
Chapter 1: Connections and Setup
Chapter 114
Front Panel - J42H750
VOL SOURCE MENUCH
12345
VOL SOURCE MENUCH
6
Note
- Image shown may differ from your TV.
1. VOL- / VOL+
Adjusts sound level and menu settings.
2. CH / CH
Select a channel.
3. SOURCE
Selects the TV, AV1, AV2, YPbPr, VGA, HDMI or USB mode.
4. MENU
Display on screen menus.
5. POWER
Switches the set on or off.
6. Power Indicator
Illuminates to bright blue when the TV is on. When the TV is powered off, this LED is also off.
Remote control sensor
Accepts the IR signal of remote controller.
Chapter 1: Connections and Setup
Chapter 1 15
Rear Panel - J42H750
14
HDMI/DVI
IN
RGB IN
(PC)
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
2 5 6 71
VIDEO
YPb Pr
LR
COMPONENT IN
AUDIO
AV1
AUDIO
L
VIDEO
R
3 4
SERVICE
SPEAKER
SWITCH
PILLOW
SPEAKER
NORMAL
SPEAKER
PILLOW JACK IN
10
11
9
8
ZEN PLS OFF RCA
12
13
AV2
VIDEO L - AUDIO - R
USB IN
Note
- Image shown may differ from your TV.
1. HDMI/DVI IN
Connect to the HDMI jack on devices with an
HDMI output.
This input can also be used as a DVI connection
with separate analog audio inputs.
2. RGB IN (PC)
Connect to the video output jack on your PC.
3. COMPONENT IN (YPbPr)
Video/Audio inputs for Component.
4. AV1
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
5. AUDIO IN (RGB/DVI)
Connect to the audio output jack on your PC.
6. ANTENNA/CABLE IN
Connect to your antenna or cable box for TV sig-
nal.
7. DIGITAL AUDIO OUT(COAXIAL)
Connect digital audio to various types of equip-
ment.
8. PILLOW JACK IN
Used to connect to pillow speaker.
9. SELECTION SWITCH
Selects the protocols and logic levels used on the
pillow-speaker port.
Warning
This switch controls the voltage levels used to
power an external pillow speaker. It allows the
television to interface to different pillow speaker
types(RCA, LG/Zenith, Philips). Setting this switch
incorrectly could damage your pillow speaker
device.
10.SPEAKER SWITCH
Used to select the speaker output type.
11.SERVICE
Used by clone device to learn settings in TV.
12.USB IN
USB device interface.
13.AV2
Connects to your Audio/Video devices using a
composite (Yellow/Red/White) cable.
14.AC IN
This TV operates on AC power.
Chapter 1: Connections and Setup
Chapter 116
Vesa Standard TV Mounts - 26/32/42 inches
General Guidelines: Choosing a location for
installing a VESA Standard Mount
Typical Wall Stud Type Mount with Swivel Bracket
Be sure the style of stand selected is capable of
supporting the weight of the TV.
If the mount will be on a wall, a typical wooden
stud behind the wall board would be the pre-
ferred choice for a location to attach the wall
mount. The wall mount location chosen should be
appropriate for drilling holes and have available
the required power source as well as
antenna/cable and other equipment leads.
For pedestal-type mounts, a sturdy surface on a
desk or other similar flat table-like surface would
be the appropriate location for mounting a
pedestal-style TV stand. (Some stands are portable
and can be moved from one location to another.)
Be sure all safety considerations are followed.
Most stands are designed so that the wiring would
be threaded through the stand itself or a loop-
through style clamp so that the wiring is neatly
bunched and not strung in such a way as to create
a potential hazard to the user.
The following examples are VESA Standard 200mm wall mounts. Since there are numerous types of stands
and mounts available, only a few are shown here. Refer to the instructions provided with the TV stand that
will be used to mount the TV.
Note
- Image shown may differ from your TV.
- Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall
Mounting Instruction Guide.
Caution: Tightening wall mount screws that are too long could cause damage to the internal components of
this television.
Use M5 X “L” bolts to mount LCD. (“L” = Wall Mount bracket thickness + 0.5 inch or below for
J26H700/J32H700/J42H750)
You must use a UL listed wall mount or the DTI Services, LLC DTI-006 Wall Mount Bracket whenever Wall
Mounting this television.
A skilled person should be contacted to perform the installation of the television and wall mount.
Specification of a generic "UL Listed wall mount" should additionally include : minimum weight that the
mount must be able to support, minimum screen size that the mount must be able to support, instructions
furnished as part of the wall mount must be closely followed, the wall mount must be suitable to support
the type of television under consideration.
Chapter 1: Connections and Setup
Chapter 1 17
Vesa Standard TV Mounts - 22 inch
To the right are some examples of VESA standard
mounts. Since there are numerous types of stands
and mounts available, only a few are shown here.
Refer to the instructions provided with the TV
stand that will be used to mount the TV. Be sure
the style of stand selected is capable of supporting
the weight of the TV and is appropriate for the
application.
General Guidelines: Choosing a Location for
installing a VESA Standard Mount
If the mount will be on a wall, a typical wooden
stud behind the wall board would be the pre-
ferred choice for a location to attach the wall
mount. The wall mount location chosen should be
appropriate for drilling holes and have available
the required power source as well as
antenna/cable and any other equipment leads as
necessary.
Wall Mounts
A sturdy surface on a desk or other similar flat
table-like furniture would be the appropriate loca-
tion for mounting a pedestal-style TV stand.
Most stands are designed so that the wiring is
threaded through the stand itself or a
loopthrough style clamp so that the wiring is neat-
ly bunched and not strung in such a way as to cre-
ate a potential hazard to the user.
(Some stands are portable and can be moved from
one location to another.) Be sure all safety consid-
erations are followed.
Pedestal Mounts and Stands
Typical Wall Stud Type Mount
with Swivel Bracket
Typical Pedestal Type Mount with
Swivel Bracket
Caution: Tightening wall mount screws that are too long could cause damage to the internal components of
this television.
Use M4 X “L” bolts to mount LCD. (“L” = Wall Mount bracket thickness + 0.3 inch or below for
J22H760)
You must use a UL listed wall mount or the DTI Services, LLC DTI-006 Wall Mount Bracket whenever Wall
Mounting this television.
A skilled person should be contacted to perform the installation of the television and wall mount.
Specification of a generic "UL Listed wall mount" should additionally include : minimum weight that the
mount must be able to support, minimum screen size that the mount must be able to support, instructions
furnished as part of the wall mount must be closely followed, the wall mount must be suitable to support
the type of television under consideration.
Chapter 1: Connections and Setup
Chapter 118
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
AV1
AUDIO
L
VIDEO
R
Rear panel of the set
Antenna Connection - 26/32/42 inches
Note
-To improve the picture quality in a poor signal
area, please purchase a signal amplifier and
install properly.
- If the antenna is not installed properly, contact
your dealer for assistance.
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
AV1
AUDIO
L
VIDEO
R
Rear panel of the set
Multi-family Dwellings/ Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Wall Antenna Socket
Outdoor Antenna
RF Coaxial Wire (75 ohm)
Turn clockwise to tighten.
Be careful not to bend the bronze wire when
connecting to an antenna port.
* Separately purchase a RF Coaxial Wire(75 ohm)
Signal
Amplifier
VHF UHF
VHF
UHF
Chapter 1: Connections and Setup
19Chapter 1
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
PILLOW JACK IN
AUDIO
R
ZEN PLS OFF RCA
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
PILLOW JACK IN
AUDIO
R
ZEN PLS OFF RCA
Rear panel of the set
Antenna Connection - 22 inch
Note
-To improve the picture quality in a poor signal
area, please purchase a signal amplifier and
install properly.
- If the antenna is not installed properly, contact
your dealer for assistance.
Rear panel of the set
Multi-family Dwellings/ Apartments
(Connect to wall antenna socket)
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
Wall Antenna Socket
Outdoor Antenna
RF Coaxial Wire (75 ohm)
Turn clockwise to tighten.
Be careful not to bend the bronze wire when
connecting to an antenna port.
* Separately purchase a RF Coaxial Wire(75 ohm)
Signal
Amplifier
VHF UHF
VHF
UHF
Chapter 1: Connections and Setup
20
VCR Connection - 26/32/42 inches
AA When connecting with an antenna
AUDIO IN
(RGB/DVI)
DIGITAL AUDIO
OUT(COAXIAL)
ANTENNA/
CABLE IN
AV1
AUDIO
L
VIDEO
R
ANT IN
ANT OUT S-VIDEO
IN
OUT
(R) AUDIO (L) VIDEO
1. Connect the Antenna out socket of the VCR to
the Antenna input socket on the TV.
2. Power up the VCR and Television.
3. Tune the TV to the channel output by the VCR.
(typically ch.3 or 4.)
4. Refer to the VCR manual for operating instruc-
tions.
VCR
Rear panel of the set
AA When connecting with an RCA cable
R - AUDIO - L
AV2
VIDEO
USB IN
AUDIO IN
(RGB/DVI)
ANTENNA/
CABLE IN
AV1
AUDIO
L
VIDEO
R
ANT IN
ANT OUT S-VIDEO
IN
OUT
(L) AUDIO (R)VIDEO
OUTPUT
SWITCH
AV2
VIDEO L - AUDIO - R
USB IN
1. Connect the AUDIO/VIDEO jacks between TV and
VCR. Match the jack colors (Video = yellow, Audio
Left = white, and Audio Right = red)
2. Insert a video tape into the VCR and press PLAY
on the VCR.
3. Select the AV1 or AV2 input source using the
INPUT button on the remote control.
4. Refer to the VCR manual for operating instruc-
tions.
VCR
Rear panel of the set
Side panel of
the set
26/32 inches
42 inch
- To avoid picture noise (interference), leave an adequate distance between the TV and the VCR.
Chapter 1
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174
  • Page 175 175
  • Page 176 176
  • Page 177 177
  • Page 178 178
  • Page 179 179
  • Page 180 180
  • Page 181 181
  • Page 182 182
  • Page 183 183
  • Page 184 184

RCA J22H760 User manual

Category
LCD TVs
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages