Brada Appliances MPN1-08CR User manual

Brand
Brada Appliances
Model
MPN1-08CR
Category
Split-system air conditioners
Type
User manual

This manual is also suitable for

PORTABLEAIRCONDITIONER
Insideyouwillfindmanyhelpfulhintsonhowtouseandmaintainyourairconditionerproperly.Just
alittlepreventativecareonyourpartcansaveyouagreatdealoftimeandmoneyoverthelifeof
yourairconditioner.Beforeoperatingthisproduct,pleasereadtheinstructionscarefullyandsavethis
manualforfutureuse.
Model:MPN1-08CR
MPN1-10CR
CONTENTS
The rating data indicated on the rating label is based
on the testing condition of installing the un-extended
air exhaust duct without adaptor (The duct and the
adaptor are listed in the accessories chart of the
InstructionManual).
NOTE
1
SAFETY PRECAUTIONS
Safety rules ........................................................................................................................................2
Electrical information ..........................................................................................................................2
Accessories ........................................................................................................................................3
Names of parts....................................................................................................................................4
Electronic control operating instructions ............................................................................................5
Operating instructions ........................................................................................................................9
Location ............................................................................................................................................11
Window kit installation ......................................................................................................................11
Exhaust hose installation ..................................................................................................................14
Care and maintenance .....................................................................................................................15
Troubleshooting ................................................................................................................................16
AIR CONDITIONER FEATURES
CARE AND MAINTENANCE
TROUBLESHOOTING TIPS
OPERATING INSTRUCTIONS
INSTALLATION INSTRUCTIONS
IDENTIFICATION OF PARTS
Operating condition .......................................................................................................................10
Remote controller illustration ............................................................................................................17
REMOTE CONTROLLER ILLUSTRATION
2
Topreventinjurytotheuserorotherpeopleandpropertydamage,thefollowinginstructionsmustbe
followed.Incorrectoperationduetoignoringofinstructionsmaycauseharmordamage.
Yourairconditionershouldbeusedinsuchaway
thatitisprotectedfrommoisture.e.g.condensation,
splashedwater,etc.Donotplaceorstoreyourair
conditionerwhereitcanfallorbepulledintowater
oranyotherliquid.Unplugimmediately.
Alwaystransportyourairconditionerinavertical
positionandstandonastable,levelsurfaceduring
use.
Turnofftheproductwhennotinuse.
Alwayscontactaqualifiedpersontocarryout
repairs.Ifthesupplycordisdamageditmustbe
repairedbyaqualifiedrepairer.
Keepanairpathofatleast30cm(0.98ft)allaround
theunitfromwalls,furnitureandcurtains.
Iftheairconditionerisknockedoverduringuse,
turnofftheunitandunplugfromthemainssupply
immediately.
SAFETY PRECAUTIONS
!
Alwaysdothis
Donotoperateyourairconditionerinawetroom
suchasabathroomorlaundryroom.
Donottouchtheunitwithwetordamphandsor
whenbarefoot.
Donotpressthebuttonsonthecontrolpanelwith
anythingotherthanyourfingers.
Donotremoveanyfixedcovers.Neverusethis
applianceifitisnotworkingproperly,orifithas
beendroppedordamaged.
Neverusetheplugtostartandstoptheunit.
Alwaysusetheswitchonthecontrolpanel.
Donotcoverorobstructtheinletoroutletgrilles.
Donotusehazardouschemicalstocleanorcome
intocontactwiththeunit.Donotusetheunitinthe
presenceofinflammablesubstancesorvapoursuch
asalcohol,insecticides,petrol,etc.
Donotallowchildrentooperatetheunit
unsupervised.
Donotusethisproductforfunctionsotherthan
thosedescribedinthisinstructionmanual.
Neverdothis
EnergySave
Usetheunitintherecommendedroomsize.
Locatetheunitwherefurniturecannotobstructtheairflow.
Keepblinds/curtainsclosedduringthesunniestpartoftheday.
Keepthefiltersclean.
Keepdoorsandwindowsclosedtokeepcoolairinandwarmairout.
Besuretheelectricalserviceisadequateforthemodelyouhavechosen. Thisinformationcanbefound
ontheserialplate,whichislocatedonthesideofthecabinetandbehindthegrille.
Besuretheairconditionerisproperlygrounded. Tominimizeshockandfirehazards,propergroundingis
important. Thepowercordisequippedwithathree-pronggroundingplugforprotectionagainstshock
hazards.
Yourairconditionermustbeusedinaproperlygroundedwallreceptacle.Ifthewallreceptacleyouintend
touseisnotadequatelygroundedorprotectedbyatimedelayfuseorcircuitbreaker,haveaqualified
electricianinstalltheproperreceptacle.
Ensurethereceptacleisaccessibleaftertheunitinstallation.
WARNING
Foryoursafety
Donotstoreorusegasolineorotherflammablevaporsandliquidsinthevicinityofthisoranyother
appliance.
Avoidfirehazardorelectricshock.
Donotremoveanyprongfromthepowercord.
Donotuseanextensioncordoranadaptorplug.
WARNING
ElectricalInfor mation
Safetyrules
Accessories
Checkalltheaccessoriesareincludedinthepackageandpleaserefertotheinstallation
instructionsfortheirusage.
Suggestedtoolsforwindowkitinstallation
1.Screwdriver(mediumsizePhillips)
2. Tapemeasureorruler
3.Knifeorscissors
4.Saw(Intheeventthatthewindowkitneedstobecutdowninsizebecause
thewindowistoonarrowfordirectinstallation)
IDENTIFICATION OF PARTS
O
F
3
IDENTIFICATION OF PARTS
NAMESOFPARTS
FRONTVIEW
OperationPanel
HorizontalLouvers
Caster
CarryingHandle
(bothsides)
1
2
3
4
1
2
3
4
Fig.1
5
6
7
8
9
10
Upper AirFilter
(Behindthegrille)
AirOutlet
Powercordoutlet
DrainOutlet
Airintake
Airintake
Lower AirFilter
(Behindthegrille)
BottomDrainPlug
11
Fig.2
8
5
6
7
9
10
11
12
12
REARVIEW
BeforeUsing This AirConditioner,beSure ToCheck TheBack
Of TheUnit ToMakeSure That TheLowerDrainPlugIsSecurity
InPlace.SeeFig.2
12
4
5
AIR CONDITIONER FEATURES
Beforeyoubegin,thoroughlyfamiliarizeyourselfwiththecontrolpanelandremotecontroller
andallfunctions,thenfollowthesymbolforthefunctionsyoudesire.
Theunitcanbecontrolledbytheunitcontrolpanelaloneorwiththeremotecontroller.
ELECTRONICCONTROLOPERATINGINSTRUCTIONS
Fig.3
OPERATIONPANELOFTHEAIRCONDITIONER
3
4
5
7
1
6
POWERbutton
AUTO COOL
DRY
FAN
MODE
SLEEP FAN
HI
MED
LOW
TIMERON
TIMEROFF
F
C
SWING
1
2
8
SLEEP
FAN
HI
MED
LOW
TIMERON
TIMEROFF
F
C
NOTE:
Powerswitchon/off.
SLEEPbutton
SLEEP
FAN
HI
MED
LOW
TIMERON
TIMEROFF
F
C
Pressthisbutton,theselectedtemperature
willincrease(cooling)by1 30minutes.
Thetemperaturewillthenincrease(cooling)
byanother afteranadditional30
minutes.
Thisnewtemperaturewillmaintainfor
7hoursbeforeitreturnstotheoriginally
selectedtemperature.Thentheunitwillcontinue
tooperateasoriginallyprogrammed.
TheSleepmodeprogramcanbecancelled
atanytimeduringoperationbyagainpressing
theSLEEP button,orturningofftheunit,or
pressingtheMODEorFANbutton.Thisfeature
isunavailabeunderFANorDRY mode.
O O
O O
C/2 F
C/2 F1
2
NOTE:
4
44
5
3
FANbutton
SLEEP
FAN
HI
MED
LOW
TIMERON
TIMEROFF
F
C
UsedtoselecttheFanSpeedinfoursteps-
LOW,MED,HIand AUTO.
lightilluminates
underdifferentfansettingsexcept AUTO
speed.Eachtimethe buttonispressed,
thefanspeedmodeisshifted.
Thefanspeedindicator
NOTE:
4
UP()andDOWN()button
SLEEP
TIMERON
TIMEROFF
F
C
Ifyouwantthedisplaytoreadtheactual
roomtemperature,see ToOperateon
DryOnly"or
section.
"
" ToOperateonFanOnly"
Thecontroliscapableofdisplaying
temperatureindegreesFahrenheitor
degreesCelsius. Toconvertfromone
tothe other,pressandholdtheUP and
DOWNbuttonsatthesametimefor3
seconds.
NOTE:
Presstoincrease Presstodecrease
LEDDisplay
SLEEP
TIMERON
TIMEROFF
F
C
NOTE:
Showsthesettemperaturein C or
F andthe Auto-timersettings.
WhileonDRY andFANmodes,itshows
theroomtemperature.
O
O
Errorcodes:
E1-
E2-
E4-
P1-
Roomtemperaturesensorerror-
Unplugtheunitandplugitbackin.
Iferrorrepeats,callforservice.
Evaporatortemperaturesensorerror-
Unplugtheunitandplugitbackin.
Iferrorrepeats,callforservice.
Displaypanelcommunicationerror-
Unplugtheunitandplugitbackin.
Iferror repeats,callforservice.
Bottomtrayisfull-Connectthe
drainhoseanddrainthecollected
wateraway.Iferrorrepeats,call
forservice.
AIR CONDITIONER FEATURES
5
Usedtoadjust(increasing/decreasing)
temperaturesettings(1C/2Fincrements)
inarangeof17C(62F)to30C(88F)or
the TIMERsettinginarangeof0~24hrs..
6
AUTO COOL
DRY
FAN
MODE
TIMERON
TIMEROFF
F
C
SWING
SWINGbutton
AIR CONDITIONER FEATURES
UsetheSWINGbuttontoadjusttheUP/DOWN
airflowdirection(Performthisfunctionwhilethe
unitisinoperation).
1.Pressthe button,theswingfeatureis
activated.
2.Eachpresswillchangetheswinganglefor6 .
Keeppressingthebuttontomovethehorizontal
louvertothedesiredposition.
IfkeeppressingtheSWINGbuttonwithout
releasingfor2moreseconds,thehorizontal
louverwouldswingup/downautomatically.
3.PresstheSWINGbuttonagaintostopthe
movement.
SWING
o
AUTO COOL
DRY
FAN
MODE
TIMERON
TIMEROFF
F
C
SWING
MODEselectbutton
Tochooseoperatingmode,presstheMODE
button.Eachtimeyoupressthebutton,amode
isselectedinasequencethatgoesfrom AUTO,
COOL,DRY ,FAN The indicatorlightbesidewill
beilluminatedandremainedononcethemode
isselected.
NOTE:
Tooperateon Autofeature:
Inthismode,thefanspeedcannotbeadjusted,
Whenyousettheairconditionerin AUTOmode,
itwill selectcoolingorfanonly
operationtocontrolroomtemperaturesetbyyou.
automatically
TooperateonDryOnly:
Underthismode,youcannotselectafanspeedor
adjustthetemperature. Thefanmotoroperatesat
LOWspeed.
Keepwindowsanddoorsclosedforthebest
dehumidifyingeffect. Takeofftheexhausthoseand
connectcontinuousdrainagehose(locallypurchased).
Duringthisfunction,thedisplaywillshowtheactual
roomtemperature,notthesettemperatureasinthe
coolingmode.
TooperateonFanOnly:
Usethisfunctiononlywhencoolingisnot
desired,suchasforroomaircirculation.
Youcanchooseanyfanspeedyouprefer.
Duringthisfunction,the displaywillshow
theactualroomtemperature,nottheset
temperatureasinthecoolingmode.
TooperateonCoolfeature:
Pressthe ADJUST buttonsor""to
selectyourdesiredroomtemperature. The
temperaturecanbesetwithinarangeof
17 C-30 C/62 F-88 F.
Pressthe"FAN"buttontochoosethefanspeed.
O O O O
7
AIR CONDITIONER FEATURES
AUTO COOL
DRY
FAN
MODE
TIMERON
TIMEROFF
F
C
SWING
TIMERbutton
Whentheunitison,firstpressthe Timerbutton,
theindicatorlightaboveword TIMEROFFillu-
minates.Itindicatesthe AutoStopprogramis
initiated.
PressorholdtheUP arroworDOWN
arrowtochangethe Autotimeby0.5hour
increments,upto10hours,thenat1hour
incrementsupto24hours. Thecontrolwillcount
downthetimeremaininguntilstart.
Theselectedtimewillregisterin5secondsand
thesystemwillautomaticallyrevertbackto
displaytheprevioustemperaturesetting.
TurningtheunitONorOFFatanytimeor
adjustingthetimersettingto0.0willcancel
the AutoStart/Stopfunction.
WhenLEDdisplaywindowdisplayscodeofE1,
E2orE4,the AutoStart/Stopfunctionwillalso
becancelled.
Whentheunitisoff,firstpressthe Timerbutton,
theindicatorlightaboveword TIMERONillu-
minates.Itindicatesthe AutoStartprogramis
initiated.
NOTE:
8
OPERATING INSTRUCTIONS
1COOL OPERATION
-Pressthe"MODE"buttonseveraltimesuntilthe"COOL"indicatorlightcomeson.
-PresstheUP andDOWNbuttonsortoselectyourdesiredroomtemperature.
Thetemperaturecanbesetwithinarangeof17 C-30 C/62 F-88 F.
-Pressthe"FAN"buttontochoosethefanspeed.
O O O O
3FANOPERATION
-Pressthe"MODE"buttonuntilthe"FAN"indicatorlightcomeson.
-Pressthe"FAN buttontochoosethefanspeed. Thetemperaturecannotbeadjusted.
-Donotputtheducttowindow.
"
OPERATINGINSTRUCTIONS
4 AUTOOPERATION
-Pressthe"MODE"buttonuntilthe"AUTO"indicatorlightcomeson.
-Underthismode,youcannotselectafanspeed. Thefanmotoroperatesat Autofan
speed. Thetemperaturecanbesetwithinarangeof17 C-30 C/62 F-88 F.
O O O O
-Pressthe"MODE"buttonuntilthe"DRY"indicatorlightcomeson.
-Underthismode,youcannotselectafanspeedoradjustthetemperature. Thefanmotor
operatesatLOWspeed.
-Keepwindowsanddoorsclosedforthebestdehumidifyingeffect.
-Donotputtheducttowindow.
2DRY OPERATION(DEHUMIDIFY)
5TIMEROPERATION
Pressthe TIMERbuttoncansettheauto-on/offtimeoftheunit.
-Whentheunitison,firstpressthe Timerbutton,the TIMEROFFindicatorlight
illuminates.Itindicatesthe AutoStopprogramisinitiated.
-
-PressorholdtheUP orDOWNbuttontochangethe Autotimeby0.5hour
increments,upto10hours,thenat1hourincrementsupto24hours. Thecontrol
willcountdownthetimeremaininguntilstart.
- Theselectedtimewillregisterin5secondandthesystemwillautomaticallyrevert
backtodisplaytheprevioustemperaturesetting.
- TurningtheunitONorOFFatanytimeoradjustingthetimersettingto0.0willcancel
the AutoStart/Stoptimedprogram.
-Whenthemalfunction(E1,E2orE4)occurs,the AutoStart/Stoptimedprogramwill
alsobecancelled.
Whentheunitisoff,firstpressthe Timerbutton,the TIMERONindicatorlight
illuminates.Itindicatesthe AutoStartprogramisinitiated.
9
OPERATING INSTRUCTIONS
6WATERDRAINAGE:
Duringdehumidifyingmode:
-Removethedrainplugfromthebackoftheunit,
- Youcanalsoinstallthedrainconnector(5/8"(1.58cm)universalfemalemender)with3/4"(1.9cm)
hose(locallypurchasedbyconsumer)forgardenhoseuse.
attachasectionofdrainhose(includedwith
thisunit)tothehole.Placetheopenendofthehosedirectlyoverthedrainareainyour
basementfloororinawatercontainer(seeFig.4&5).
Whenthewaterlevelofthebottomtrayreachesapredeterminedlevel,
andtheunitstopsairconditioning/dehumidificationprocess.
However,thefanmotorwillcontinuetooperate(thisisnormal).Carefullymovetheunittoadrain
location,removethebottomdrainplugandletthewaterdrainaway(Fig.6).Restartthemachine
untilthe P1 symboldisappears.Iftheerrorrepeats,callforservice.
-
NOTE:
theunitbeeps8times,
thedigitaldisplayareashows P1
Removethe
drainplug
Fig.4
Continuous
drainhose
Fig.5 Fig.6
Theairconditionermustbeoperatedwithintheambienttemperaturerangeindicatedbelow:
MODE
ROOM TEMPERATURE
COOL
DRY
OPERATINGCONDITION
>13 C/54 F
O O
>17 C/62 F
O O
10
INSTALLATIONINSTRUCTIONS
Vertical
window
WindowSliderKit
Minimum:67.5cm(2.22ft).
Maximum:123cm(4.04ft).
WindowSliderKit
Minimum:67.5cm(2.22ft).
Maximum:123cm(4.04ft).
Horizontal
window
Fig.8
Fig.9
Fig.7
Location
Theairconditionershouldbeplacedonafirm
foundationtominimizenoiseandvibration.For
safeandsecurepositioning,placetheunitona
smooth,levelfloorstrongenoughtosupporttheunit.
Theunithascasterstoaidplacement,butitshould
onlyberolledonsmooth,flatsurfaces.Usecaution
whenrollingoncarpetsurfaces.Donotattemptto
rolltheunitoverobjects.
Theunitmustbeplacedwithinreachofaproperly
ratedgroundedsocket.
Neverplaceanyobstaclesaroundtheairinletor
outletoftheunit.
Allowatleast30cm(0.98ft)ofspacefromthewall
forefficientair-conditioning.
Donotuseanextensioncordoranadaptorplug.
Yourwindowkithasbeendesignedtofitmost
standard Vertical and horizontal window
applications,However,itmaybenecessaryforyouto
improvise/modifysomeaspectsoftheinstallation
proceduresforcertaintypesofwindow.Pleaserefer
toFig.8&Fig.9forminimumandmaximumwindow
openings.
WindowkitInstallation
Ifthewindowopeningislessthanthementioned
minimumlengthofthewindowsliderkit,cutthatone
withholesinitshorttofitforthewindowopening.
Nevercutouttheholeinwindowsliderkit.
Note:
30cm (0.98f t)
30cm (0. 98ft)
INSTALLATION INSTRUCTIONS
11
INSTALLATION INSTRUCTIONS
1.Cutthefoamseal(adhesivetype)totheproperlengthand
attachittothewindowstool.Fig.10
2. Attachthewindowsliderkittothewindowstool. Adjustthe
lengthofthewindowsliderkitaccordingtothewidthof
window,shortentheadjustablewindowkitifthewidthof
windowislessthan27inches.
Openthewindowsashandplacethewindowsliderkiton
thewindowstool.Fig.11
3.Cutthefoamseal(adhesivetype)totheproperlength
andattachitonthetopofthewindow.ShownasinFig.12
4.Closethewindowsashsecurelyagainstthewindow.
5.Cutthefoamsealtoanappropriatelengthandsealingthe
opengapbetweenthetopwindowsashandouterwindow
sash.ShowasinFig.13.
Foamseal A
(adhesivetype)
Foamseal
Fig.10
Fig.11
Fig.12
Fig.13
Windowkit
Windowstool
27 ~ 48
Windowkit
Windowstool
Installationindouble-hungsashwindows
12
67.5cm~123cm
INSTALLATION INSTRUCTIONS
1.Cutthefoamseal(adhesivetype)totheproperlengthand
attachittothewindowframe.SeeFig.14.
2. Attachthewindowsliderkittothewindowstool. Adjustthe
lengthofthewindowsliderkitaccordingtothewidthof
window,shortentheadjustablewindowkitifthewidthof
windowislessthan27inches.
Openthewindowsashandplacethewindowsliderkiton
thewindowstool.SeeFig.15.
3.Cutthefoamseal(adhesivetype)totheproperlength
andattachitonthetopofthewindow.ShownasinFig.16.
4.Closetheslidingsashsecurelyagainstthewindow.
5.Cutthefoamsealtoanappropriatelengthandsealingthe
opengapbetweenthetopwindowsashandouterwindow
sash.ShownasinFig.17.
Foamseal
Foamseal A
(adhesivetype)
Fig.14
Fig.15
Fig.16
Fig.17
Windowkit
27 ~ 48
Installationinaslidingsashwindows
13
INSTALLATION INSTRUCTIONS
Exhausthoseinstallation:
Theexhausthoseandadaptormustbeinstalledorremoved
inaccordancewiththeusagemode.
COOL mode
FANorDEHUMIDIFY mode
Install
Remove
The duct can be compressed or extended moderately
according to the installation requirement, but it is
desirable to keep the duct length to a minimum.
1.
Install the window Exhaust adaptor (flat mouth) onto the
exhausthoseasshowninFig.18.Refertotheprevious
pagesforwindowkitinstallation.
IMPORTANT:
DONOT OVERBEND THEDUCT (SEEFig.21)
NOTE:
Fig.18
Fig.19
Fig.20
Fig.21
Flatmouth
Pushin
Hook
2.PlacetheExhausthoseoveragainsttheairoutletopening
hook(SeeFig.19)andflattheotherend(SeeFig.20)for
quickinstallation.
14
CARE AND MAINTENANCE
CAREANDMAINTENANCE
1)Besuretounplugtheunitbeforecleaningorservicing.
2)Donotusegasoline,thinnerorotherchemicalstoclean
theunit.
3)Donotwashtheunitdirectlyunderataporusingahose.
Itmaycauseelectricaldanger.
4)Ifthepowercordisdamaged,itshouldberepairedby
manufactureroritsagent.
IMPORTANT:
1. Airfilter
-Cleantheairfilteratleastoncetwoweekstoprevent
inferiorfanoperationbecauseofdust.
-
Thisunithastwofilters.Grasptheupperfiltertab(Fig.22),
pullthefilterout.Removethelowerfilterbylooseningthe
screws,takedowntheairinletgrille,thenremovetheair
filterasshowninFig.23&24.
-
Washtheairfilterbyimmersingitgentlyinwarmwater
(about40 C/104 F)withaneutraldetergent.Rinsethefilter
anddryitinashadyplace.
-
Inserttheupperairfilterfromupwardaftercleaning,attach
thelowerairfilterontheairinletgrille,theninstallthegrille
byusingthescrew.
Removal
Cleaning
Mounting
O O
2.Unitenclosure
-Usealint-freeclothsoakedwithneutraldetergenttoclean
theunitenclosure.Finishedbyadrycleancloth.
3.Unitidleforalongtime
,,
-Removetherubberplugatthebackoftheunitandattach
ahosetodrainoutlet
(SeeFig.4&5).
-Removetheplugfromthebottomdrainoutlet,allthewater
inthebottomtraywoulddrainout(SeeFig.6).
-KeeptheappliancerunningonFANmodeforhalfadayin
awarmroomtodrytheapplianceinsideandpreventmold.
-Stoptheapplianceandunplugit,wrapthecordand
bundleitwiththetape(Fig.25).Removethebatteriesfrom
theremotecontroller.
-Cleantheairfilterandreinstallit.
-Unscrewtheexhausthosetotherightorleftandpullout
foruninstallation(Fig.26),keepitsafety.
.Placetheopenendofthehose
directlyoverthedrainareainyourbasementfloor
Fig.22
Airfilter
(slideout)
Fig.23
Fig.25
Removethe
screwand
taketheair
inletgrille
down
Removetheairfilter
outfromthegrille
Fig.24
Band
Powercord
Fig.26
15
TROUBLESHOOTING TIPS
TROUBLESHOOTING
1.Unitdoesnot
Startwhen
Pressingon/off
Button
TROUBLES
POSSIBLECAUSES
SUGGESTREMEDIES
Resetthetemperature.
Makesureallthewindowsand
doorsareclosed.
Removetheheatsourcesifpossible.
Connecttheductandmake
sureitcanfunctionproperly.
Decreasethesettemperature.
Cleantheairfilter.
-Roomtemperatureislowerthan
thesettemperature.(Coolingmode)
- Thewindowsordoorsintheroom
arenotclosed.
- Thereareheatsourcesinsidethe
room.
-Exhaustairductisnotconnectedor
blocked.
- Temperaturesettingistoohigh.
- Airfilterisblockedbydust.
2.Notcoolenough
Placetheunitonaflat,level
groundifpossible.
Itisnormal.
- Thegroundisnotlevelornotflat
enough.
- Thesoundcomesfromtheflowing
oftherefrigerantinsidethe
air-conditioner.
3.Noisyorvibration
4.Gurglingsound
-P1appearsinthedisplaywindow
Drainthewaterinthebottomtray.
16
REMOTECONTROLLERILLUSTRATION
Usetheremotecontrollerwithinadistanceof8
metersfromtheappliance,pointingittowardsthe
receiver.Receptionisconfirmedbyabeep.
Locationof theremotecontroller.
8m
CAUTIONS
Theairconditionerwillnotoperateifcurtains,doorsorothermaterialsblockthesignals
fromtheremotecontrollertotheindoorunit.
Preventanyliquidfromfallingintotheremotecontroller.Donotexposetheremote
controllertodirectsunlightorheat.
Iftheinfraredsignalreceiverontheindoorunitisexposedtodirectsunlight,theair
conditionermaynotfunctionproperly.Usecurtainstopreventthesunlightfromfalling
onthereceiver.
Ifotherelectricalappliancesreacttotheremotecontroller.eithermove
theseappliancesorconsultyourlocaldealer.
Theremotecontrollerispowedbytwodrybatteries(R03/LR03X2)
housedintherearpartandprotectedbyacover.
(1)Removethecoverbypressingandslidingoff.
(2)Removetheoldbatteriesandinsertthenewbatteries,placing
the(+)and(-)endscorrectly.
(3)Reattachthecoverbyslidingitbackintoposition.
Whenthebatteriesareremoved,theremotecontrollererases
allprogramming. Afterinsertingnewbatteries,theremote
controllermustbereprogrammed.
NOTE:
Replacingbatteries
.
Handlingtheremotecontroller
TEMP
AUTO
COOL
DRY
FAN
HIGH
MED
LOW
MODE
FANSPEED
SWING
TIMERON
ECONOMY
ON/OFF
TIMEROFF
RESETLOCK
SETTEMPERATURE(F)
LED
DISPLAY
CAUTIONS
Donotmixoldandnewbatteriesorbatteriesofadifferenttype.
Donotleavethebatteriesintheremotecontrollerifitisnotgoingtobeusedfor2or3months.
Disposeoftheoldbatteriesinthespecialcontainerstobefoundinthesalesoutlets.
17
REMOTECONTROLLERILLUSTRATION
Model
LowestVoltageof
CPUEmittingSignal
RatedVoltage
R51I13/BG(C)E
-5 C 60 C()
8m(whenusing3.0voltage,itGets11m)
3.0V(DrybatteriesR03/LR03 2)
2.0V
~
RemoteControllerSpecifications
1.OperatingMode: AUTO,COOL,DRY,andFAN.
2. TimerSettingFunctionin24hours.
3.IndoorSetting TemperatureRange:17 C~30 C(62 F~88 F).
4.FullfunctionofLCD(LiquidCrystalDisplay)
5.Backlightemitting.
O O
Environment
SignalReceiving
Range
PerformanceFeature
-41 F~140 F
O O
NOTE:
Temperaturesettingdisplay: Fahrenheitscale(F), R51I13/BG(C)E
Functionbuttons
1
TEMP UP Button
Pushthisbuttontoincreasetheindoortemperaturesettingin1 C(2F)
incrementsto30 C(88F).
o
o
2
TEMP DOWNButton
Pushthisbuttontodecreasetheindoortemperaturesettingin1 C(2F)
incrementsto17 C(62F).
o
o
Model:R51I13/BG(C)E
Eachtimethebuttonispressed,theoperationmodeisselectedinthe
sequenceofthefollowing:
3
MODEButton
TEMP
AUTO
COOL
DRY
FAN
HIGH
MED
LOW
MODE
FANSPEED
SWING
TIMERON
ECONOMY
ON/OFF
TIMEROFF
RESET LOCK
1
2
4
3
6
5
7
8
9
10
11
SET TEMPERATURE(F)
LED
DISPLAY
4
SWINGButton
Usedtostoporstartlouvermovementandsetthedesiredup/down
airflowdirection.
5
RESETButton
OncetherecessedRESET buttonispressed,allofthecurrentsettings
willbecancelledandthecontrollerwillreturntotheinitialsettings.
AUTO
COOL
DRY
FAN
12
6
7
ON/OFFButton
Operationstartswhenthisbuttonispressedandstopswhenthebutton
ispressedagain.
Usedtoselectthefanspeedinfoursteps:
AutoLowMedHigh
FANSPEEDButton
18
REMOTECONTROLLERILLUSTRATION
TIMERONButton
8
Pressthisbuttontoactivatethe Auto-ontimesetting.Eachpresswill
increasethetimesettingin30minutesincrements,upto10hours,then
at1hourincrementsupto24hours. Tocancelthe Auto-ontimesetting,
justpressthebuttonuntilthetimesettingis0.0.
9
ECONOMY(SLEEP)Button
Selectthisfunctionduringthesleepingtime.Itcanmaintainthemost
comfortabletemperatureandsaveenergy. Thisfunctionisavailableon
COOL or AUTOmodeonly.
Functionbuttonscontinued
Model:R51I13/BG(C)E
TEMP
AUTO
COOL
DRY
FAN
HIGH
MED
LOW
MODE
FANSPEED
SWING
TIMERON
ECONOMY
ON/OFF
TIMEROFF
RESET LOCK
1
2
4
3
6
5
7
8
9
10
11
SET TEMPERATURE(F)
LED
DISPLAY
12
TIMRTOFFButton
LOCKButton
NOTE: WhiletheunitisrunningunderEnergy-savingmode,itwouldbe
cancelledifanyotherbuttonsarepressed.
10
Pressthisbuttontoactivatethe Auto-offtimesetting.Eachpresswill
increasethetimesettingin30minutesincrements,upto10hours,then
at1hourincrementsupto24hours. Tocancelthe Auto-offtimesetting,
justpressthebuttonuntilthetimesettingis0.0.
11
Pressthisrecessedbuttontolockallcurrentsettings,andtheremote
controllerwillnotacceptanyoperationexceptthatoftheLOCK.Usethe
LOCKmodewhenyouwanttopreventsettingsfrombeingchanged
accidentally.PresstheLOCKbuttonagaintocanceltheLOCKfunction.
A locksymbolwillappearontheremotecontrollerdisplaywhenthelock
functionisactivated.
Pressthisbuttontoclearthedisplayontheindoorunit,pressitagainto
lightthedisplay.
LEDDisplayButton
12
TIMERONOFF
SET TEMPERATURE
TransmissionIndicator
Temp./Timerdisplay
FANSPEEDdisplay
MODEdisplay
ON/OFFdisplay
Thistransmissionindicatorwilllightwhenremotecontrollertransmitssignalstotheindoor
unit.
Displaysthecurrentselectedmode.Including AUTO,COOL,DRY,andFAN.
Thetemperaturesetting(from17 C(62 F)to30 C(88 F))ortimersetting(0~24h)willbe
displayed.IfFANmodeisselected,therewillbenodisplay.
O O O O
Thisindicatorwillbedisplayedwhentheunitisoperating.
Displaystheselectedfanspeed: AUTO,HIGH, whenthe
fanspeedisselectedin AUTOspeed.When AUTOorDRY Modeisselected,therewillbe
nosignalsdisplayed.
MEDandLOW.Nothingdisplays
Thisdisplayareashowsthesettingsofthe TIMER. Thatis,ifonlythe Auto-ontimefunction
isset,itwilldisplay TIMERON.Ifonlythe Auto-offtimefunctionisset,itwilldisplay TIMER
OFF.Ifbothfunctionsareset,itwilldisplay TIMERONOFFwhichindicatesyouhave
chosenboththe Auto-ontimeand Auto-offtime.
LOCKdisplayisdisplayedwhenpushingtheLOCKbutton.PushtheLOCKbuttontoclear
display.
MODEdisplay(FANmode)
TIMERdisplay
LOCKIndicator
IndicatorsonLCD
19
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Brada Appliances MPN1-08CR User manual

Brand
Brada Appliances
Model
MPN1-08CR
Category
Split-system air conditioners
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents