Lightolier 1102T User manual

Lightolier
Brand
Lightolier
Model
1102T
Type
User manual

Lightolier 1102T is a recessed downlighting fixture that is perfect for a variety of applications. It features a 6 3/4” aperture and a low profile design, making it ideal for use in tight spaces. The fixture is constructed of durable materials, including #20 ga. galvanized steel and #14 ga. galvanized steel, and is rated for damp locations.

The 1102T is available with a variety of lamp types, including 13W twin tube, 18W quad tube, and 26W quad tube. It is also compatible with a variety of reflector trims, so you can customize the look of the fixture to match your décor.

The 1102T is easy to install and comes with all the necessary hardware. It is also backed by a manufacturer's warranty, so you can be sure that it will perform as expected for years to come.

Lightolier 1102T is a recessed downlighting fixture that is perfect for a variety of applications. It features a 6 3/4” aperture and a low profile design, making it ideal for use in tight spaces. The fixture is constructed of durable materials, including #20 ga. galvanized steel and #14 ga. galvanized steel, and is rated for damp locations.

The 1102T is available with a variety of lamp types, including 13W twin tube, 18W quad tube, and 26W quad tube. It is also compatible with a variety of reflector trims, so you can customize the look of the fixture to match your décor.

The 1102T is easy to install and comes with all the necessary hardware. It is also backed by a manufacturer's warranty, so you can be sure that it will perform as expected for years to come.

Lytecaster
®
Recessed Downlighting 1102T
Page 1 of 1 Fluorescent Frame-In Kit 6 3/4” Aperture Low Profile 2 Lt.
Features
1. Mounting Frame: #20 ga. galvanized steel. Accommodates ceiling up to 1”
thick. Push-in/twist-out rotoclips hold reflector flush to ceiling.
2. Junction Box: #14 ga. galvanized steel. Rated for 8 #12 AWM through
branch circuit wires suitable for 90° C, for end of run 75° C. Quick release
“L” shaped cover for access to wiring. Integral cable clamps permit attach-
ment of non-metallic Romex
®
or armored cable without the need for separate
connectors.
3. Mounting Bars: Die-formed steel, 16 ga. Four bars, 13” long, extend to
27”, permit off-center mounting; bars rotate 90° and lock in both directions;
integral nailer for wood joists, locking tabs for T-bar runners.
4. Socket Housing: 22 ga. galvanized spring steel; snap-in quick assembly for
precise lamp location.
5. Socket: Molded thermoplastic; prewired with #18 AWMleads to 4” X 3
1/2” X 2” junction box.
6. Thermally Protected Ballast: Single 2 lamp magnetic or universal voltage
electronic, Class-P Rated. Insulation must be kept 3” away from fixture sides
and wiring compartment and must not be placed above fixture as to entrap
heat.
Options and Accessories
Plaster Ceiling Ring: 1961 - 7/8” depth for wet plaster ceiling.
Remodeler Anchor Clip: 1985S
Labels
UL (Suitable for Damp Locations), I.B.E.W.
2
3
5
1
4
15 11/16”
9”
6
3 13/16”
3 7/8”
Ceiling Opening
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit Ballast Voltage Lamp Type Electrical
Input Wattage Input Current
1102T1 NPF Magnetic 120V 2 Pin (Gx23) 13W Twin Tube 35W .600A
1102TH1 HPF Magnetic 120V 2 Pin (Gx23) 13W Twin Tube 32W .280A
1102TH2 HPF Magnetic 277V 2 Pin (Gx23) 13W Twin Tube 32W .160A
1102TH1R (Remodel)* HPF Magnetic 120V 2 Pin (Gx23) 13W Twin Tube 31W .280A
1102T13U HPF Electronic 120V/277V 4 Pin (G24q-1) 13W Quad Tube 33W .28/.12A
1102T18U HPF Electronic 120V/277V 4 Pin (G24q-2) 18W Quad Tube 40W .34/.15A
1102T26U HPF Electronic 120V/277V 4 Pin (G24q-3) 26W Quad Tube 56W .47/.21A
Reflector Trims — See Individual Reflector Trim Specification Sheets
Alzak
®
Cone Step Baffle Cross Blade Fresnel Lens Enclosed Diffuser Wall Washer
1113TGD 1105T 1132T 1126T 1128T 1135T
1113TCL 1105TWH 1178T 1135TWH
Romex
®
is a registered trademark of General Cable Industries Inc.
US Patent Nos.: 5,045,985; 4,327,403 and patents pending
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • B0506
  • Page 1 1

Lightolier 1102T User manual

Lightolier
Brand
Lightolier
Model
1102T
Type
User manual

Lightolier 1102T is a recessed downlighting fixture that is perfect for a variety of applications. It features a 6 3/4” aperture and a low profile design, making it ideal for use in tight spaces. The fixture is constructed of durable materials, including #20 ga. galvanized steel and #14 ga. galvanized steel, and is rated for damp locations.

The 1102T is available with a variety of lamp types, including 13W twin tube, 18W quad tube, and 26W quad tube. It is also compatible with a variety of reflector trims, so you can customize the look of the fixture to match your décor.

The 1102T is easy to install and comes with all the necessary hardware. It is also backed by a manufacturer's warranty, so you can be sure that it will perform as expected for years to come.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents