Item # C.S.I. Section 11420
HOLDING & TRANSPORT
P.O. Box 696
■
Louisville, KY 40201
■
Toll-free: 1-800-814-2028
■
Local: 502-778-2791
■
Quote & Order Fax: 1-800-444-0602
a division of ITW Food Equipment Group LLC
F37444 (11-10)
Model VCD44
SPECIFICATIONS
First in, rst out high volume chip warmer Vulcan Hart Model
No. VCD44. Capacity of 35 lb. or 44 gallons with internal bafes
to minimize chip breakage. Fan circulates air for even heat
distribution and quick heating of chips. The fully removable back
panel/heating module allows for full access to the interior of the
unit and the removable bafes. This allows for quick and easy
cleaning of the unit. Back panel/heating module and all of the
bafes are removable without the use of tools. One piece doors.
Top ll door opens wide for easily loading. Door opens 90 degrees
creating a shelf for scooping chips. Magnetic door latch ensures
secure closure and easy opening. Illuminated on/off switch.
Thermostat factory preset to 180°F. 4-5 inch adjustable legs.
Reversible side mounted scoop holder. Durable 20 gauge
stainless steel construction with high density insulation. Furnished
with 6 foot power cord and NEMA 5-15 plug. Lifetime warranty
on heating element
Exterior Dimensions:
25
1
⁄
4
" W x 27
1
⁄
2
" D x 38
1
⁄
2
" H
UL listed. UL listed to Canadian safety standards, Classied
by UL to NSF Std. #4.
STANDARD FEATURES
Capacity of 35 lbs. or 44 gallons ■
Door opens 90 degrees creating a shelf for scooping chips ■
Magnetic door latch ensures secure closure and ■
easy opening
Wide top opening door for easy loading of chips ■
Fan circulates air for quick and even heat of chips ■
Removable bafes minimize chips being crushed and can ■
be cleaned in warewasher
Removable back panel/heating module allows for full ■
access to the interior of the unit.
No tools required for the removal of the back panel or the ■
bafes when cleaning.
Durable 20 gauge stainless steel construction with high ■
density insulation
One-piece doors ■
Illuminated on/off switch ■
Thermostat factory preset to 180°F ■
4"-5" adjustable legs ■
Reversible side mounted scoop holder ■
Lifetime warranty on heating element ■
Furnished with 6 foot power cord and NEMA 5-15 plug ■
120 volt, 1,250 watts, 10.5 amps ■
One year limited parts and labor warranty ■
OPTIONS
2 year extended warranty
VCD44
FIRST-IN FIRST-OUT CHIP WARMER
P.O. Box 696
■
Louisville, KY 40201
■
Toll-free: 1-800-814-2028
■
Local: 502-778-2791
■
Quote & Order Fax: 1-800-444-0602
a division of ITW Food Equipment Group LLC
HOLDING & TRANSPORT
F37444 (11-10)
VCD44
FIRST-IN FIRST-OUT CHIP WARMER
Model
Number
Capacity
Dimensions
Shipping
Weight
Electrical
High Deep Wide Volts Watts Amps
VCD44 44 gallon 38
1
⁄
2
" 27
1
⁄
2
" 25
1
⁄
4
" 160 lbs. 120 1250 10.5
This appliance is manufactured for commercial use only and is not intended for home use.
26 3/8”
24 1/4”
22 1/2”
28”
38 1/2”
37 1/2”
8”
4” Legs
Door Opening
20.00
33 1/2”
34 1/2”
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Vulcan VCW26 Owner's manual
-
Sentinel PA2046 User manual
-
-
Vulcan-Hart VCD22 Installation & Operation Manual
-
-
-
Wolf SCB47C Installation guide
-
-
Vulcan-Hart V SERIES VHFA18 ML-138071 User manual
-
Wittco Corp 500-CW Operating instructions