Dell M409WX Projector Owner's manual

www.dell.com | support.dell.com

Dell™ M409WX Projector

User’s Guide

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you

make better use of your projector.

NOTICE: A NOTICE indicates either potential damage to

hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property

damage, personal injury, or death.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell

Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell

Inc.; DLP and DLP

®

logo are trademarks of Texas Instruments; Microsoft and

Windows are either registered trademarks or trademarks of Microsoft

Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either

the entities claiming the marks and names or their products. Dell Inc. disclaims

any proprietary interest in trademarks and trade names other than its own.

Model M409WX

May 2008 Rev. A01

Contents 3

Contents

1 About Your Projector . . . . . . . . . . . . . . . . 5

About Your Projector . . . . . . . . . . . . . . . . . 6

2 Connecting Your Projector . . . . . . . . . . . . 7

Connecting a Computer . . . . . . . . . . . . . . . . . . 8

Connecting a DVD Player

. . . . . . . . . . . . . . . . . 9

Connecting a DVD Player using an S-video Cable

. . 9

Connecting a DVD Player using a

Composite Cable

. . . . . . . . . . . . . . . . . . 10

Connecting a DVD Player using a

Component Cable . . . . . . . . . . . . . . . . . . 11

Connecting a DVD Player using an HDMI Cable

. . 12

3 Using Your Projector . . . . . . . . . . . . . . . . 13

Turning Your Projector On . . . . . . . . . . . . . . . . 13

Turning Your Projector Off

. . . . . . . . . . . . . . . . 13

Adjusting the Projected Image . . . . . . . . . . . . . 14

Raising the Projector Height

. . . . . . . . . . . . 14

Lowering the Projector Height . . . . . . . . . . . 14

Adjusting the Projector Zoom and Focus . . . . . . . . 15

Adjusting Projection Image Size

. . . . . . . . . . . . 16

4 Contents

Using the Control Panel . . . . . . . . . . . . . . . . . 17

Using the Remote Control

. . . . . . . . . . . . . . . . 19

Using the On-Screen Display . . . . . . . . . . . . . . 21

Main Menu

. . . . . . . . . . . . . . . . . . . . . 21

Input Select . . . . . . . . . . . . . . . . . . . . . 21

Auto-Adjust

. . . . . . . . . . . . . . . . . . . . . 22

Set Up

. . . . . . . . . . . . . . . . . . . . . . . . 22

PICTURE (in PC Mode) . . . . . . . . . . . . . . . 23

PICTURE (in Video Mode)

. . . . . . . . . . . . . 23

DISPLAY (in PC Mode)

. . . . . . . . . . . . . . . 24

DISPLAY (in Video Mode) . . . . . . . . . . . . . 25

LAMP

. . . . . . . . . . . . . . . . . . . . . . . . 26

OTHERS

. . . . . . . . . . . . . . . . . . . . . . . 27

4 Troubleshooting Your Projector . . . . . . . 31

Guiding Signals . . . . . . . . . . . . . . . . . . . . . 34

Changing the Lamp

. . . . . . . . . . . . . . . . . . . 35

5 Specifications . . . . . . . . . . . . . . . . . . . . . 37

Contacting Dell . . . . . . . . . . . . . . . . . . . . . 40

6 Appendix: Glossary . . . . . . . . . . . . . . . . . 41

About Your Projector 5

1

About Your Projector

Before connecting your projector ensure that all the necessary components are

available. Your projector ships with the components shown below. Contact Dell

(see

Contacting Dell on page 40

) if any of the components are missing.

Your Dell™ M409WX projector ships with the following components:

Package Contents

Power cable 1.8m VGA cable (VGA to VGA)

AAA Batteries (2) Remote control

CD User’s Guide& Documentation Carrying case

6 About Your Projector

About Your Projector

CAUTION: Safety Instructions

1

Do not use the projector near appliances that generate a lot of heat.

2

Do not use the projector in areas where there is an excessive amount of dust. The

dust may cause the system to fail and projector will automatically shutdown.

3

Ensure that the projector is mounted in a well-ventilated area.

4

Do not block the ventilation slots and openings on the projector.

5

Ensure the projector operates between ambient temperatures (5ºC to 35ºC).

NOTE: For more information, see the safety information that shipped with your

projector.

1 Control panel

2 Zoom tab

3 Focus ring

4 Lens

5 Elevator button

6 IR receiver

1

2

4

5

6

3

Connecting Your Projector 7

2

Connecting Your Projector

CAUTION: Before you begin any of the procedures in this section, follow the

Safety Instructions as described on page 6.

1 USB remote connector

2 VGA input connector

3 HDMI input connector

4 S-video input connector

5 Video input connector

6 Audio output connector

7 Audio input connector

8 Security cable slot

9 Power cable connector

8

9

1

2

3

4

5

6

7

M409WX

8 Connecting Your Projector

Connecting a Computer

NOTE: The USB cable is not provided by Dell.

1 Power cable

2 VGA to VGA cable

3 USB to USB cable

1

2

3

MOLEX

Connecting Your Projector 9

Connecting a DVD Player

Connecting a DVD Player using an S-video Cable

NOTE: The S-Video cable is not provided by Dell.

1 Power cable

2 S-video cable

2

1

10 Connecting Your Projector

Connecting a DVD Player using a Composite Cable

NOTE: The Composite video cable is not provided by Dell.

1 Power cable

2 Composite video cable

2

1

Connecting Your Projector 11

Connecting a DVD Player using a Component Cable

NOTE: The D-sub to YPbPr cable is not provided by Dell.

1 Power cable

2 D-sub to YPbPr cable

1

2

12 Connecting Your Projector

Connecting a DVD Player using an HDMI Cable

NOTE: The HDMI cable is not provided by Dell.

1 Power cable

2 HDMI cable

2

1

Using Your Projector 13

3

Using Your Projector

Turning Your Projector On

NOTE: Turn on the projector before you turn on the source. The Power light

blinks blue until the Power button is pressed.

1

Remove the lens cap.

2

Connect the power cable and appropriate signal cables. For information about

connecting the projector, see Connecting Your Projector on page 7.

3

Press the projector

Power

button (see Using the Control Panel on page 17).

4

Turn on your source (computer, DVD player, etc.). The projector automatically

detects your source. If you have multiple sources connected to the projector, press

the

Source

button on the remote control or control panel to select the desired

source.

5

The projector displays the Dell logo, if it does not detect a signal.

If the "Searching for signal..." message appears on the screen, ensure that the

appropriate cables are securely connected.

Turning Your Projector Off

NOTICE: You must turn off the projector before you disconnect the power

cable from the projector.

To turn the projector off:

1

Press the

Power

button .

2

Press the

Power

button again to turn off the projector.

The projectors cooling fans are on for 90 seconds before the projector switches off

completely.

3

To quickly turn off the projector, press the Power button while the projectors

cooling fans are still running.

NOTE: Wait for 60 seconds before you turn the projector on again.

4

Disconnect the power cable from the electrical outlet and the projector.

14 Using Your Projector

NOTE: If you press the Power button

while the projector is running, the

"Press Power Button To Turn Off Projector" message appears on the screen. To

clear the message, press a button on the control panel. The message disappears after

5 seconds.

Adjusting the Projected Image

Raising the Projector Height

1

Press the

Elevator

button.

2

Raise the projector to the desired display angle, and then release the button to

lock the elevator foot into position.

3

Use the tilt adjustment wheel to fine-tune the display angle.

Lowering the Projector Height

1

Press the

Elevator

button.

2

Lower the projector, and then release the button to lock the elevator foot into

position.

1 Elevator button

2 Elevator foot

3 Tilt adjustment wheel

1

3

2

Using Your Projector 15

Adjusting the Projector Zoom and Focus

CAUTION: To avoid damaging the projector, ensure that the zoom lens and

elevator foot are fully retracted before moving the projector or placing the

projector in its carrying case.

1

Rotate the zoom tab to zoom in and out.

2

Rotate the focus ring until the image is clear. The projector focuses at distances

ranging between 3.3 ft to 39.4 ft (1.0 m to 12 m).

1 Zoom tab

2 Focus ring

2

1

16 Using Your Projector

Adjusting Projection Image Size

327.7"

(832.4cm)

245.8"

(624.3cm)

191.2"

(485.6cm)

136.6"

(346.8cm)

81.9"

(208.1cm)

27.3"

(69.4cm)

359.4"(913.0cm)

269.6"(684.7cm)

209.7"(532.6cm)

149.8"(380.4cm)

89.9"(228.2cm)

30.0 "(76.1cm)

Projector to screen distance

39.4'(12.0m)

29.5'(9.0m)

23.0'(7.0m)

16.4'(5.0m)

9.8'(3.0m)

3.3'(1.0m)

Dell M409WX

Using Your Projector 17

Using the Control Panel

Screen

(Diagonal)

Max.

30.0"

(76.1cm)

89.9"

(228.2cm)

149.8"

(380.4cm)

209.7"

(532.6cm)

269.6"

(684.7cm)

359.4"

(913.0cm)

Min.

27.3"

(69.4cm)

81.9"

(208.1cm)

136.6"

(346.8cm)

191.2"

(485.6cm)

245.8"

(624.3cm)

327.7"

(832.4cm)

Screen

Size

Max.

(WxH)

25.4" X 15.9" 76.2" X 47.6" 127" X 79.4" 177.8" X 111.1" 228.8" X 142.9" 304.8" X 190.5"

(64.5cm X

40.3cm)

(193.5cm X

121.0cm)

(322.6cm X

201.6cm)

(451.6cm X

282.3cm)

(580.6cm X

362.9cm)

(774.2cm X

483.9cm)

Min.

(WxH)

23.2" X 14.5" 69.5" X 43.4" 115.8" X 72.4" 162.1" X 101.3" 208.4" X 130.3" 277.9" X 173.7"

(58.8cm X

36.8cm)

(176.5cm X

110.3cm)

(294.1cm X

183.8cm)

(411.8cm X

257.4cm)

(529.4cm X

330.9cm)

(705.9cm X

441.2cm)

Hd

Max.

1.97"

(5.0cm)

5.91"

(15.0cm)

9.84"

(25.0cm)

13.78"

(35.0cm)

17.72"

(45.0cm)

23.62"

(60.0cm)

Min.

1.79"

(4.56cm)

5.38"

(13.68cm)

8.97"

(22.79cm)

12.56"

(31.91cm)

16.15"

(41.03cm)

21.54"

(54.71cm)

Distance 3.3' (1.0m) 9.8' (3.0m) 16.4' (5.0m) 23.0' (7.0m) 29.5' (9.0m) 39.4' (12.0m)

* This graph is for user reference only.

1

3

5

2

7

9

4

8

6

18 Using Your Projector

1 LAMP warning light

• If the LAMP light is solid amber, replace the

lamp (see

Changing the Lamp on page 35

). If

this problem persists, contact Dell (see

Contacting Dell on page 40

).

• If the LAMP light is blinking amber, the

projector automatically shuts down indicating a

system failure. If this problem persists, contact

Dell (see

Contacting Dell on page 40

).

2 TEMP warning light

• A solid amber TEMP light indicates that the

projector is overheated. The display

automatically shuts down. Turn the display on

again after the projector cools down. If the

problem persists, contact Dell (see

Contacting

Dell on page 40

).

• A blinking amber TEMP light indicates that the

projector fan has failed and the projector

automatically shuts down. If the problem

persists, contact Dell (see

Contacting Dell on

page 40

).

3 Power Allows you to turn the projector on and off. For

more information, see Turning Your Projector On

on page 13 and Turning Your Projector Off on

page 13.

4 Up / Keystone

adjustment

Allows you to select options from the On Screen

Display (OSD) menu. You can also use the Up

button to adjust the image distortion caused

by tilting the projector.

5 / Auto adjust Allows you to adjust the OSD setting.

You can also use the Right button to

synchronize the projector to the input source.

Auto adjust does not operate if the OSD is

displayed.

6 Down / Keystone

adjustment

Allows you to select options from the On Screen

Display (OSD) menu.

You can also use the Down button to adjust

the image distortion caused by tilting the

projector.

Using Your Projector 19

Using the Remote Control

7 Menu Allows you to activate the OSD. Use

and the Menu button to navigate through the

OSD.

8 / Source Allows you to adjust the OSD setting.

You can also use the Left button to toggle

through Analog RGB, Composite, Component

(YPbPr, via VGA), S-video, and HDMI sources

when multiple sources are connected to the

projector.

9 Enter Allows you to confirm a selected OSD option.

1

2

3

4

5

6

7

8

9

19

20

18

17

16

15

14

13

11

10

12

20 Using Your Projector

1 Power Turns the projector on and off. For more

information, see Turning Your Projector On on

page 13 and Turning Your Projector Off on

page 13.

2 Enter Press to confirm the selection.

3 Right Press to adjust the OSD setting.

4 Down Press to select OSD items.

5 Aspect Ratio Press to change aspect ratio of a displayed image.

6 Page up Press to move to previous page.

7 Mute Press to mute or un-mute the projector speaker.

8 Page down Press to move to next page.

9 Video mode The Dell M409WX Micro-projector has preset

configurations that are optimized for displaying

data (PC Graphics) or video (movies, games,

etc.). Press the Video Mode button to toggle

between PC mode, Movie mode, Game Mode,

sRGB, or CUSTOM mode (for user to setup and

save preferred settings). Pressing the Video Mode

button once will show the current display mode.

Pressing the Video Mode button again will switch

between modes.

10 Blank screen Press to hide/unhide the image.

11 Up Press to select OSD items.

12 Left Press to adjust the OSD setting.

13 Menu Press to activate the OSD.

14 Volume up Press to increase the volume.

15 Laser Point the remote control at the screen, press and

hold the laser button to activate the laser light.

16 Volume down Press to decrease the volume.

17 Keystone adjustment Press to adjust image distortion caused by tilting

the projector. (+40/-35 degrees)

18 Source Press to switch between Analog RGB, Composite,

Component (YPbPr, via VGA), HDMI, and S-

video sources.

Page is loading ...

Dell M409WX Projector Owner's manual

Dell M409WX Projector Owner's manual

Related papers

Other documents