Glastender KC24-NC-BS2(L) Datasheet

Glastender
Brand
Glastender
Model
KC24-NC-BS2(L)
Type
Datasheet

Glastender KC24-NC-BS2(L) is a one-door, self-contained keg cooler with a stainless steel 1-faucet column tower and optional two or three faucets for use with 1/6 kegs. It has a pre-plumbed plastic drain bottle for drain pan waste, and a black vinyl-clad steel exterior front and sides. The cooler also includes a chain for securing an optional CO2 bottle, a forced air evaporator with blower hose for cooling the column tower, and a self-contained six-foot grounded cord and plug.

Glastender KC24-NC-BS2(L) is a one-door, self-contained keg cooler with a stainless steel 1-faucet column tower and optional two or three faucets for use with 1/6 kegs. It has a pre-plumbed plastic drain bottle for drain pan waste, and a black vinyl-clad steel exterior front and sides. The cooler also includes a chain for securing an optional CO2 bottle, a forced air evaporator with blower hose for cooling the column tower, and a self-contained six-foot grounded cord and plug.

Printed in USA
Specications subject to change without notice. For current specications please visit our website.
Glastender, Inc. • 5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Approval/Notes:
Project:
Item #: Qty:
Model #:
AIA#
SIS#
Rev. 08-11-09
4.11
24" Keg Cooler
One Door Self-Contained
• Self-contained with six-foot grounded cord and plug
• Galvanized steel interior construction with stainless steel
floor
• Stainless steel keg rack and 1/2″ thick ABS plastic
threshold scuff plate
• Foamed-in-place insulation
• Stainless steel finished top with recessed drain pan and
lift-out perforated inserts
• Stainless steel 1-faucet column tower and optional two or
three faucets for use with 1/6 kegs*
• Pre-plumbed plastic drain bottle for drain pan waste
• Black vinyl-clad steel exterior front and sides
• Chain included for securing optional CO
2
bottle
• Forced air evaporator with blower hose for cooling column
tower
Electrical
• 120V, 1 phase, 60 Hz, 3.6 full load amps
• Dedicated 15 amp circuit is required
• Includes a 6-foot grounded cord and plug which exits the
bottom rear
Refrigeration
• 1/6 HP, R134a refrigerant
Operating Range
• 34º F to 40º F
Plumbing
• Automatic condensate evaporator. No drain connection
required
• Includes a pre-plumbed plastic bottle for drain pan waste.
A knock-out hole is provided if external draining is required.
Capacity
• One 1/4 barrel keg (7-3/4 gal.) or one 1/2 barrel keg
(15-1/2 gal.) or three 1/6 barrel kegs (5 gal.)*
Materials
• 22 gauge, stainless steel parts include: interior floor, front of
cabinet, and evaporator housing
• 22 gauge black vinyl-clad parts include: sides and
standard door
• 22 gauge galvanized steel parts include: exterior sub-top and back
and interior walls and ceiling
• 20 gauge stainless steel parts include: keg rack, finished top, drain
pan inserts, and tower
• 16 gauge stainless steel parts include: legs
• 16 gauge galvanized steel parts include: base
• 16 gauge zinc plated CR steel parts include: leg sockets
• 12 gauge stainless steel parts include: hinges,
hinge brackets, and lock brackets
Standard Features
Specications
KC24-NC-BS2(L)
Shown with optional 2-faucet column
tower for use with 1/6 barrel mini kegs*
* NOTE: 1/6 barrel keg availability varies by region. Please
consult your local distributor before ordering. Low
profile keg taps, which only fit domestic style kegs,
must be used for the 2nd and 3rd keg.
KC24-N_-_ S _ (_)
Base Height:
1 = 1"
C = 2"Casters
6 = 6"Legs
Door Style:
B = Black vinyl-clad
S = Stainless
Door Hinge Location:
L = Left or R = Right
Top Style:
S = Stainless
Tower Style:
1 = One Faucet
2 = Two Faucets
3 = Three Faucets
Dimensional Information
5400 North Michigan Road • Saginaw, MI • 48604-9780
989.752.4275 • 800.748.0423 • Fax 989.752.4444
www.glastender.com
Printed in USA
One Door 24″ Self-Contained Keg Cooler
OPENING
DOOR
AIR FLOW
COMPARTMENT
COMPRESSOR
HOUSING
EVAPORATOR
MINIMUM CLEARANCE FOR AIR FLOW
AIR FLOW WILL VOID WARRANTY.
RESTRICTION OR BLOCKAGE OF
COMPRESSOR FAILURE DUE TO
WARNING
FRONT VIEW
PLAN VIEW
WITH 2" CASTERS
WITH OPTIONAL 6" LEGS
180°
SWING
SIDE VIEWS
1/6 BARREL MINI KEGS
COLUMN TOWER FOR USE WITH
SHOWN WITH OPTIONAL 2-FAUCET
24"
COMPARTMENT
COMPRESSOR
HOUSING
EVAPORATOR
1/6 BARREL MINI KEGS
COLUMN TOWER FOR USE WITH
SHOWN WITH OPTIONAL
2-FAUCET
6"
8"
24"
10"
8 1/2"
6"
16 1/4"
21"
8"
13 15/16"
10 3/16"
11 1/2"
22 3/4"
48"
1 1/2"
3"
29 3/4"
36"
21"
25 1/4"
22 1/2"
2 3/8"
36"
4 1/2"4 1/2"
24"
21"
7 1/8"
30 3/4"
38 1/2"
  • Page 1 1
  • Page 2 2

Glastender KC24-NC-BS2(L) Datasheet

Glastender
Brand
Glastender
Model
KC24-NC-BS2(L)
Type
Datasheet

Glastender KC24-NC-BS2(L) is a one-door, self-contained keg cooler with a stainless steel 1-faucet column tower and optional two or three faucets for use with 1/6 kegs. It has a pre-plumbed plastic drain bottle for drain pan waste, and a black vinyl-clad steel exterior front and sides. The cooler also includes a chain for securing an optional CO2 bottle, a forced air evaporator with blower hose for cooling the column tower, and a self-contained six-foot grounded cord and plug.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents