Native Instruments Maschine Studio 2.0 v2.8 Quick start guide

GETTING STARTED

The information in this document is subject to change without notice and does not represent a

commitment on the part of Native Instruments GmbH. The software described by this docu-

ment is subject to a License Agreement and may not be copied to other media. No part of this

publication may be copied, reproduced or otherwise transmitted or recorded, for any purpose,

without prior written permission by Native Instruments GmbH, hereinafter referred to as Native

Instruments.

“Native Instruments”, “NI” and associated logos are (registered) trademarks of Native Instru-

ments GmbH.

ASIO, VST, HALion and Cubase are registered trademarks of Steinberg Media Technologies

GmbH.

All other product and company names are trademarks™ or registered® trademarks of their re-

spective holders. Use of them does not imply any affiliation with or endorsement by them.

Document authored by: David Gover, Nicolas Sidi

Software version: 2.8 (02/2019)

Hardware version: MASCHINE STUDIO

Special thanks to the Beta Test Team, who were invaluable not just in tracking down bugs, but

in making this a better product.

Disclaimer

NATIVE INSTRUMENTS GmbH

Schlesische Str. 29-30

D-10997 Berlin

Germany

www.native-instruments.de

NATIVE INSTRUMENTS North America, Inc.

6725 Sunset Boulevard

5th Floor

Los Angeles, CA 90028

USA

www.native-instruments.com

NATIVE INSTRUMENTS K.K.

YO Building 3F

Jingumae 6-7-15, Shibuya-ku,

Tokyo 150-0001

Japan

www.native-instruments.co.jp

NATIVE INSTRUMENTS UK Limited

18 Phipp Street

London EC2A 4NU

UK

www.native-instruments.co.uk

NATIVE INSTRUMENTS FRANCE SARL

113 Rue Saint-Maur

75011 Paris

France

www.native-instruments.com

SHENZHEN NATIVE INSTRUMENTS COMPANY Limited

5F, Shenzhen Zimao Center

111 Taizi Road, Nanshan District, Shenzhen,

Guangdong

China

www.native-instruments.com

Contact

Table of Contents

1 Welcome to MASCHINE .............................................................................................

9

1.1 Documentation Overview ............................................................................................................ 10

1.1.1 In This Document ....................................................................................................... 11

1.1.2 Document Conventions .............................................................................................. 12

2 First Steps ................................................................................................................

16

2.1 Loading a Drum Kit from the Factory Library .............................................................................. 17

2.2 Playing with the Pads ................................................................................................................. 21

2.3 Recording Your First Pattern ....................................................................................................... 23

2.4 Playing with Your Pattern ........................................................................................................... 25

2.4.1 Using Solo and Mute .................................................................................................. 25

2.4.2 Using Note Repeat ..................................................................................................... 27

2.5 Saving Your Project .................................................................................................................... 28

2.6 To Sum Up… .............................................................................................................................. 29

3 Building Your Own Drum Kit .......................................................................................

30

3.1 Opening Your Project .................................................................................................................. 30

3.2 Customizing Your Drum Kit ......................................................................................................... 34

3.2.1 Selecting Another Snare Sample ................................................................................ 34

3.2.2 Loading a Drumsynth ................................................................................................ 37

3.2.2.2 Loading a Drumsynth into a Plug-in List on the Controller ........................41

3.2.3 Adjusting Volume, Swing and Tempo ......................................................................... 43

3.2.4 Changing the Color of Your Sounds ........................................................................... 46

3.2.5 Moving your Sounds and Groups ................................................................................ 48

3.3 Saving Your Project .................................................................................................................... 49

3.4 To Sum Up… .............................................................................................................................. 49

Table of Contents

MASCHINE STUDIO - Getting Started - 4

4 Creating Beats ..........................................................................................................

51

4.1 Fine-tuning your First Pattern ..................................................................................................... 51

4.1.1 Your Pattern in the Software ...................................................................................... 52

4.1.2 Doubling the Pattern and Adding a Variation ............................................................ 53

4.1.3 Quantizing the Rhythm .............................................................................................. 54

4.2 Adding a Second Pattern ............................................................................................................ 57

4.2.1 Selecting a Pattern Slot ............................................................................................. 57

4.2.2 Adjusting the Pattern Length ..................................................................................... 58

4.2.3 Recording a New Pattern Using the Count-in ............................................................ 60

4.2.4 Switching Patterns .................................................................................................... 61

4.3 Editing Patterns in the Software ................................................................................................. 61

4.4 Saving Your Project .................................................................................................................... 62

4.5 To Sum Up… .............................................................................................................................. 63

5 Adding a Bass Line ....................................................................................................

64

5.1 Selecting Another Group ............................................................................................................. 65

5.2 Renaming and Coloring the Group .............................................................................................. 67

5.3 Using an Instrument Plug-in for the Bass .................................................................................. 68

5.3.1 Browsing the MASSIVE Presets .................................................................................. 69

5.3.2 Switching to Keyboard Mode ...................................................................................... 73

5.3.3 Adjusting the Root Note for the Pads ......................................................................... 75

5.4 Recording a Bass Line ................................................................................................................ 76

5.4.1 Recording a Bass Pattern .......................................................................................... 76

5.4.2 Recording Another Bass Pattern ................................................................................ 77

5.4.3 Loading an Additional Bass Sound ............................................................................ 77

5.5 Accessing the Plug-in Parameters .............................................................................................. 78

5.6 Saving Your Project .................................................................................................................... 82

Table of Contents

MASCHINE STUDIO - Getting Started - 5

5.7 To Sum Up… .............................................................................................................................. 82

6 Applying Effects ........................................................................................................

83

6.1 Loading Effects .......................................................................................................................... 84

6.2 Playing with Effects .................................................................................................................... 88

6.2.1 Adjusting the Effect Parameters ................................................................................ 89

6.2.2 Practice Makes Perfect! ............................................................................................. 90

6.2.3 Bypassing Effects ...................................................................................................... 91

6.3 Modulating Effect Parameters .................................................................................................... 93

6.3.1 Recording Modulation ................................................................................................ 93

6.3.2 Editing Modulation .................................................................................................... 95

6.4 Saving Your Project .................................................................................................................... 96

6.5 To Sum Up… .............................................................................................................................. 96

7 Creating Beats with the Step Sequencer .....................................................................

98

7.1 Building Up a Beat in Step Mode ................................................................................................ 99

7.1.1 Using Step Mode ........................................................................................................ 99

7.1.2 Adjusting the Pattern Length in Step Mode ............................................................... 100

7.1.3 Recording Modulation in Step Mode .......................................................................... 101

7.1.4 A Few Notes on Step Mode ......................................................................................... 103

7.2 Adjusting the Step Grid .............................................................................................................. 104

7.3 Saving Your Project .................................................................................................................... 107

7.4 To Sum Up… .............................................................................................................................. 107

8 Creating Scenes ........................................................................................................

109

8.1 Working with Scenes ................................................................................................................... 109

8.2 Assigning Patterns to Scenes ..................................................................................................... 110

8.3 Managing Scenes ....................................................................................................................... 113

8.3.1 Renaming and Coloring Scene Slots .......................................................................... 114

Table of Contents

MASCHINE STUDIO - Getting Started - 6

8.3.2 Duplicating and Deleting Scenes ............................................................................... 114

8.4 To Sum Up… .............................................................................................................................. 116

8.5 Saving Your Project .................................................................................................................... 116

9 Creating an Arrangement ...........................................................................................

118

9.1 Accessing Song view .................................................................................................................. 118

9.1.1 Creating your First Section ........................................................................................ 120

9.1.2 Assigning a Scene to a Section .................................................................................. 121

9.2 Managing Sections ..................................................................................................................... 122

9.2.1 Adjusting the Length of a Section .............................................................................. 122

9.2.1.1 Adjusting the Length of a Section Using the Software ...............................123

9.2.1.2 Adjusting the Length of a Section Using the Controller .............................124

9.2.2 Duplicating and Removing Sections .......................................................................... 125

9.3 Selecting a Loop Range .............................................................................................................. 127

9.4 Saving Your Project .................................................................................................................... 128

9.5 To Sum Up… .............................................................................................................................. 129

10 Playing Live ..............................................................................................................

130

10.1 Performing with Scenes and Sections using the Pads ................................................................ 130

11 Quick Reference ........................................................................................................

134

11.1 Using Your Controller .................................................................................................................. 134

11.1.1 Controller Modes and Mode Pinning .......................................................................... 134

11.1.2 Controlling the Software Views from Your Controller ................................................. 136

11.2 MASCHINE Project Overview ........................................................................................................ 138

11.2.1 Sound Content ........................................................................................................... 138

11.2.2 Arrangement .............................................................................................................. 140

11.3 MASCHINE Hardware Overview ................................................................................................... 143

11.3.1 MASCHINE STUDIO Hardware Overview ...................................................................... 143

Table of Contents

MASCHINE STUDIO - Getting Started - 7

11.3.1.1 CONTROL Section .......................................................................................145

11.3.1.2 I/O and Level Section .................................................................................147

11.3.1.3 PERFORMANCE Section ..............................................................................149

11.3.1.4 GROUPS Section ........................................................................................150

11.3.1.5 TRANSPORT Section ...................................................................................150

11.3.1.6 PADS Section .............................................................................................152

11.3.1.7 EDIT Section ..............................................................................................155

11.4 MASCHINE Software Overview ..................................................................................................... 158

11.4.1 Header ....................................................................................................................... 159

11.4.2 Browser ..................................................................................................................... 161

11.4.3 Arranger .................................................................................................................... 163

11.4.4 Control Area ............................................................................................................... 166

11.4.5 Pattern Editor ............................................................................................................ 167

12 Troubleshooting ........................................................................................................

169

12.1 Knowledge Base ......................................................................................................................... 169

12.2 Technical Support ....................................................................................................................... 169

12.3 Registration Support .................................................................................................................. 170

12.4 User Forum ................................................................................................................................. 170

13 Glossary ...................................................................................................................

171

Index ........................................................................................................................

179

Table of Contents

MASCHINE STUDIO - Getting Started - 8

1 Welcome to MASCHINE

Thank you for buying MASCHINE!

MASCHINE is essentially the synergy of the MASCHINE controller hardware and the MA-

SCHINE software combining the advantages of both worlds for making music, live as well as in

the studio. The intuitive, hands-on qualities of a dedicated Instrument, the MASCHINE con-

troller, with the advanced editing features and the versatility of the MASCHINE software turn it

into the creative center of your musical productions.

You can create tight rhythms, harmonies and melodies — the highly enjoyable instrument

combines a pattern-based sequencer, professional sampler, multiple studio and creative ef-

fects, and VST/AU plug-in host. Everything is intuitively controllable via the fully integrated

hardware — once you touch the tactile controller the fun and intuitive workflow takes over, al-

lowing you to stay focused on your music.

Since you can integrate it in any DAW that supports VST, Audio Units or the AAX format with

multiple instances, you can profit from its abilities in almost any software setup or use it as a

stand-alone application. You can sample your own material, slice loops and rearrange them

easily turning your ideas into full productions.

However, MASCHINE is a lot more than an ordinary drum machine or sampler: It comes with

an 8-gigabyte Library programmed and created by well-known artists and a sophisticated, yet

easy to use tag-based Browser to give you instant access to the sounds you are looking for. But

it doesn’t stop there! You can create your own sounds and samples or use MASCHINE EXPAN-

SION packs, available for purchase from the Native Instruments website to further enhance

your library of sounds.

You can also control your external MIDI Hardware and Software with the MASCHINE controller

and customize the functions of the pads, knobs and buttons to your needs, utilizing the Con-

troller Editor Application.

We hope you enjoy the MASCHINE playground as much as we do. Now let’s get going!

Welcome to MASCHINE

MASCHINE STUDIO - Getting Started - 9

1.1 Documentation Overview

Native Instruments provide many information sources regarding MASCHINE. The main docu-

ments should be read in the following sequence:

1. MASCHINE Getting Started (this document): The MASCHINE Getting Started guide provides

a practical approach to MASCHINE via a set of tutorials covering simple tasks in order to

help you familiarize yourself with MASCHINE.

2. MASCHINE Manual: The MASCHINE Manual provides you with a comprehensive descrip-

tion of all MASCHINE software and hardware features.

Additional documentation sources provide you with details on more specific topics:

▪ Controller Editor Manual: Besides using your MASCHINE hardware controller together with

its dedicated MASCHINE software, you can also use it as a powerful and highly versatile

MIDI controller to pilot any other MIDI-capable application or device. This is made possible

by the Controller Editor software, an application that allows you to precisely define all MIDI

assignments for your MASCHINE controller. The Controller Editor was installed during the

MASCHINE installation procedure. For more information on this, please refer to the Con-

troller Editor Manual available as a PDF file via the Help menu of Controller Editor.

▪ Online Support Videos: You can find a number of support videos on The Official Native In-

struments Support Channel under the following URL: https://www.youtube.com/NIsupport-

EN. We recommend that you follow along with these instructions while the respective ap-

plication is running on your computer.

Other Online Resources: If you are experiencing problems related to your Native Instruments

product that the supplied documentation does not cover, there are several ways of getting help:

▪ Knowledge Base

▪ User Forum

▪ Technical Support

▪ Registration Support

You will find more information on these subjects in the chapter ↑12, Troubleshooting.

Welcome to MASCHINE

Documentation Overview

MASCHINE STUDIO - Getting Started - 10

MASCHINE documents are available in PDF. You can also access these documents from the appli-

cation’s Help menu or the following location:

www.native-instruments.com.

Please check the Native Instruments website regularly for up-to-date and localized versions of these

documents.

1.1.1 In This Document

What you are reading now is the MASCHINE Getting Started. This document consists of a set

of tutorials that will guide you through common workflows in MASCHINE. Please follow these

tutorials in the described order. You will learn a little something in each of them which will be

essential later on. On the way, you will get to know the main objects and concepts of MA-

SCHINE. After reading this, you should have the basic know-how allowing you to make music

with MASCHINE!

Even if you’re already familiar with MASCHINE, all tutorials are worth a read as every chapter may

have little workflow hints of which you weren’t aware. Should you wish to revise a specific task cov-

ered in a later tutorial, be sure to check the prerequisites listed at the beginning of each chapter!

This document is structured as follows:

▪ The first part is this introduction.

▪ The second part holds the tutorials:

◦ Chapter ↑2, First Steps: Load a drum kit from the factory library via the Browser, play

this kit with the pads and use it to record a simple rhythmic pattern — all this using

your MASCHINE controller only.

◦ Chapter ↑3, Building Your Own Drum Kit: Customize your drum kit by quickly ex-

changing some of its sounds via the Browser and by adjusting some of the sounds’ ba-

sic settings.

◦ Chapter ↑4, Creating Beats: Record a second pattern and discover how to fine-tune

your patterns.

Welcome to MASCHINE

Documentation Overview

MASCHINE STUDIO - Getting Started - 11

◦ Chapter ↑5, Adding a Bass Line: Add a bass line to your song using a VST/AU instru-

ment plug-in in MASCHINE.

◦ Chapter ↑6, Applying Effects: Add effects to the various instruments in your song and

quickly automate the effect parameters.

◦ Chapter ↑7, Creating Beats with the Step Sequencer: Create a Pattern, this time with

the step sequencer, which is another great way of creating grooves from your control-

ler.

◦ Chapter ↑8, Creating Scenes: Arrange your Patterns into Scenes and play them live.

◦ Chapter ↑9, Creating an Arrangement: Assign your Scenes to Sections and Arrange

your song.

▪ The third and last part consists of useful global information on MASCHINE to be used at

any time:

◦ Chapter ↑11, Quick Reference provides you with a quick reference of the MASCHINE

hardware controller and the MASCHINE software. It gives you a good overview of the

main concepts and features of MASCHINE, along with lists of hardware shortcuts for

various tasks. You can use it as a quick reminder before you dive into the MASCHINE

Manual.

◦ Chapter ↑12, Troubleshooting gathers useful information for troubleshooting and get-

ting help.

◦ Chapter ↑13, Glossary holds definitions of all the important terms and concepts used

in MASCHINE.

1.1.2 Document Conventions

This section introduces you to the signage and text highlighting used in this document. This

document uses particular formatting to point out special facts and to warn you of potential is-

sues. The icons introducing these notes let you see what kind of information is to be expected:

Whenever this exclamation mark icon appears, you should read the corresponding note carefully and

follow the instructions and hints given there if applicable.

Welcome to MASCHINE

Documentation Overview

MASCHINE STUDIO - Getting Started - 12

This light bulb icon indicates that a note contains useful extra information. This information may

often help you to solve a task more efficiently, but does not necessarily apply to the setup or operat-

ing system you are using; however, it’s always worth a look.

Furthermore, the following formatting is used:

▪ Text appearing in (drop-down) menus (such as Open…, Save as… etc.) and paths to loca-

tions on your hard drive or other storage devices is printed in italics.

▪ Text appearing elsewhere in the software (labels of buttons, controls, text next to checkbox-

es etc.) is printed in blue. Whenever you see this formatting applied, you will find the same

text appearing somewhere on the screen.

▪ Text appearing on labels of the MASCHINE controller is printed in orange. Whenever you

see this formatting applied, you will find the same text on the controller.

▪ Text appearing on the display(s) of your controller is printed in gray. Whenever you see this

formatting applied, you will find the same text on the controller’s display(s).

▪ Important names and concepts are printed in bold.

▪ References to keys on your computer’s keyboard are in square brackets (e.g., “Press [Shift]

+ [Return]”).

► Single instructions are introduced by this play button type arrow.

→ Results of actions are introduced by this smaller arrow.

Naming Convention

Throughout the documentation we will refer to MASCHINE controller (or just controller) as the

hardware controller and MASCHINE software as the software installed on your computer.

The term “effect” is sometimes be abbreviated as “FX” when referring to elements in the MA-

SCHINE software and hardware. These terms have the same meaning.

Button Combinations and Shortcuts on the Controller

Most instructions will use the “+” sign to indicate buttons (or buttons and pads) that must be

pressed simultaneously, starting with the button indicated first. E.g., an instruction such as:

“Press SHIFT + PLAY” means:

Welcome to MASCHINE

Documentation Overview

MASCHINE STUDIO - Getting Started - 13

1. Press and hold SHIFT.

2. While holding SHIFT, press PLAY and release it.

3. Release SHIFT.

Displayed Products

Some images displayed in this document include products from the KOMPLETE and KOM-

PLETE ULTIMATE series. These products are not included with MASCHINE.

For more information on KOMPLETE and KOMPLETE ULTIMATE please visit the Native Instru-

ments website.

Unlabeled Buttons and Knobs on the Controller

The buttons and knobs above and below the displays on your MASCHINE STUDIO controller do

not have labels (all other elements on the controller do).

The unlabeled buttons and knobs on the MASCHINE STUDIO controller.

Welcome to MASCHINE

Documentation Overview

MASCHINE STUDIO - Getting Started - 14

For better reference, we applied a special formatting here: throughout the document, the ele-

ments are capitalized and numbered, so the buttons are written Button (1–8), while the knobs

are written Knob (1–8). For example, whenever you see an instruction such as “Press Button 2

to open the EDIT page,” you’ll know it’s the second button from the left above the displays.

Welcome to MASCHINE

Documentation Overview

MASCHINE STUDIO - Getting Started - 15

2 First Steps

In this first tutorial, you will load a drum kit from the factory library, play it with the pads and

record a simple rhythmic pattern.

For a complete overview of MASCHINE and its controls, please see section ↑11, Quick Reference.

Prerequisites

Please carefully follow the instructions of the Setup Guide which can be downloaded in PDF

format from the Native Instruments website. Once you have followed the Setup Guide, MA-

SCHINE should be installed on your computer, its basic audio settings correctly configured,

and the hardware controller connected to your computer. If this is not the case, please return

to the Setup Guide for more information before going any further.

► Please start MASCHINE via one of the usual ways on your operating system — for exam-

ple, by double-clicking the alias placed on your desktop during the installation procedure.

A Project in MASCHINE

In MASCHINE, your whole song (or track) is called Project. A Project consists of all sounds,

instruments, effects, settings, along with all arrangement information you will create — in oth-

er words, a Project holds everything defining your song.

► If you already started testing MASCHINE, please start again with a blank, new Project by

clicking the File menu and choosing New or by using the shortcut [Ctrl] + [N] ([command]

+ [N] on macOS).

First you will learn how to load a drum kit using the MASCHINE software and then use your

hardware controller to carry out the same procedure.

For a complete overview of a MASCHINE Project, please see section ↑11.2, MASCHINE Project

Overview.

First Steps

MASCHINE STUDIO - Getting Started - 16

2.1 Loading a Drum Kit from the Factory Library

First you will choose a complete drum kit from the huge factory library included with MA-

SCHINE, and load it using the MASCHINE Browser. The Browser is your tool for finding, tag-

ging and categorizing all types of objects used in MASCHINE.

A drum kit basically consists of several instruments — called Sounds in MASCHINE terminolo-

gy. Those Sounds are put together into a Group, which represents the complete kit. In addition,

A MASCHINE Project can have any number of Groups which are organized into Banks. The first

Group bank is labeled A1 to H1 in the MASCHINE software and the second is labeled A2 to

H2, the third A3 to H3, and so on. So let’s look for a nice kit and load it into Bank 1 Group A

which is selected by default when you start a new Project.

2.1.1 Loading a Drum Kit from the Factory Library in the MASCHINE Software

In the MASCHINE software, the Browser is found in the left part of the window.

If you cannot see the Browser in the MASCHINE software, click the magnifying glass icon in

the Header at the top of the MASCHINE window in order to show the Browser:

Enable the magnifying glass to display the Browser.

To load a drum kit, do the following:

1. Click the Library tab to open the Library pane.

First Steps

Loading a Drum Kit from the Factory Library

MASCHINE STUDIO - Getting Started - 17

2. Click the Group icon to get a list of all available drum kits in the Library:

3. Make sure the Content selector to the right is unlit, so you only see Native Instruments

factory content:

4. In the TYPES filter, select the Kits.

⇨ The Browser will then display only kits in the Result list:

First Steps

Loading a Drum Kit from the Factory Library

MASCHINE STUDIO - Getting Started - 18

5. Select the Urban Kit sub-type tag below to further refine your search.

6. Scroll down the Result list and double-click EK-TL A Kit to load this drum kit into Group

A:

2.1.2 Loading a Drum Kit from the Factory Library Using the Controller

On your controller, do the following:

1. Press button A on the left of your controller to select the first Group slot. This is where

you are going to load our drum kit. Button A should be lit to indicate that it is selected.

2. Press the BROWSE button at the top left of your controller.

The BROWSE button lights up. In the left display, you now are presented with a selection

of choices.

First Steps

Loading a Drum Kit from the Factory Library

MASCHINE STUDIO - Getting Started - 19

3. Press Button 1 or Button 2 above the displays to select GROUPS.

By selecting this, a list of Groups will become visible on the right display.

4. Check that Button 4 above the displays is not fully lit and that the USER label underneath

is not highlighted — if necessary, press Button 4 to disable it.

This will now allow you to select only Native Instruments factory content.

5. Turn Knob 5 until Kits is selected, so that only drum kits are shown on the right display.

6. Turn Knob 6 until Urban Kit is selected, this will further reduce the results list on the

right display to the kits of that sub-type.

7. Turn the jog wheel (the bigger knob with a bright LED ring on the right of your controller)

or Knob 8 (under the right display) to scroll down the list until EK-TL A KIT is selected.

First Steps

Loading a Drum Kit from the Factory Library

MASCHINE STUDIO - Getting Started - 20

Page is loading ...

Native Instruments Maschine Studio 2.0 v2.8 Quick start guide

Native Instruments Maschine Studio 2.0 v2.8 Quick start guide

Related papers

Other documents