2. Fashion & style
  3. Watches
  4. Casio
  5. 5696
5696

Casio 5696, AQ-800E, AQ-800EC, AQ-800ECGG, AQ-800EG User guide

  • Hello! I am an AI chatbot trained to assist you with the Casio 5696 User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Operation Guide 5696
EN-9
4. Press A to return to the Date Mode.
The setting operation is complete when the screen stops flashing.
x The watch will automatically return to the Timekeeping Mode if you do not perform
any button operation for one or two minutes.
x The Auto Calendar automatically distinguishes between months of different lengths.
You do not need to change the setting except for leap years or after replacing the
watch’s battery.
To adjust the analog time setting
In any mode, press C to advance the time setting by
20seconds.
x Holding down C advances the setting at high speed.
EN-8
To configure date settings
1. In the Date Mode, hold down A for at least two
seconds. This causes the month to flash.
2. Use A to select the setting item you want to change.
Date Mode Month
Day of the week Day
AA
A
A (Two seconds)
3. Press B to change the currently selected setting.
x Holding down B scrolls the setting at high speed.
Month
Day
Day of the week
EN-7
3. Use B to change the selected setting.
Screen This setting item:
Reset the second to 00
x 30 to 59 seconds: Adds 1 to minutes
Change the hour or minute
x Holding down B changes the current selection at high speed.
Toggle between 12-hour (12H) and 24-hour (24H) timekeeping
4. Press A to return to the Timekeeping Mode.
The setting operation is complete when the screen stops flashing.
x The watch returns to the Timekeeping Mode automatically if you do not perform
any button operation for one or two minutes in the setting screen.
EN-6
Configuring Time and Date Settings
To configure the digital time settings
1. In the Timekeeping Mode, hold down A for at least
two seconds. This causes the seconds to flash on the
display.
2. Press A to move the flashing in the sequence shown
below to select a setting.
Timekeeping Mode Second
12/24-Hour Format HourMinute
AA
A
A (Two seconds)
A
PM indicator
EN-5
Watch Features
You can also find information
about operational procedures
at the CASIO website.
https://support.casio.com/
global/en/wat/model/5696/
◆ Dual Time
Dual Time lets you keep track of the current
time in another time zone in addition to
your current location’s time.
◆ Alarm
◆ Stopwatch
EN-4
Stopwatch ......................................................................................................... EN-19
To measure elapsed time ...............................................................................EN-19
Main Indicators ................................................................................................. EN-20
Specifications ................................................................................................... EN-21
EN-3
Contents
About This Manual .............................................................................................. EN-2
Watch Features ................................................................................................... EN-5
Configuring Time and Date Settings ................................................................. EN-6
To configure the digital time settings ...............................................................EN-6
To configure date settings ...............................................................................EN-8
To adjust the analog time setting .....................................................................EN-9
Selecting a Mode .............................................................................................. EN-10
Alarm .................................................................................................................. EN-12
To configure alarm and hourly time signal settings ........................................EN-12
To stop the alarm ...........................................................................................EN-15
To test the alarm ............................................................................................EN-15
Dual Time .......................................................................................................... EN-16
To configure Dual Time settings ....................................................................EN-16
EN-2
About This Manual
x Depending on the model of your watch, display text
appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
x Button operations are indicated using the letters shown
in the illustration.
x Each section of this manual provides you with the
information you need to perform operations in each
mode.
x Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
EN-1
ENGLISH
You can also find information about
operational procedures at the CASIO website.
https://support.casio.com/global/en/wat/model/5696/
MA2203-EA © 2022 CASIO COMPUTER CO., LTD.
Operation Guide 5696
EN-19
Stopwatch
The Stopwatch Mode lets you measure elapsed time. The
range of the stopwatch is 59 minutes, 59.99 seconds.
To measure elapsed time
AA A A A (2 seconds)
Start Stop Resume Stop Reset
Minutes: Seconds
1/100 second
EN-18
x While the 12/24-hour timekeeping screen is displayed,
press B to toggle between 12 and 24.
4. Press A to return to the Dual Time Mode.
The setting operation is complete when the screen stops flashing.
x The watch will automatically return to the Timekeeping Mode if you do not perform
any button operation for one or two minutes.
EN-17
2. Use A to select the setting item you want to change.
Dual Time Mode Hour
12/24-hour format Minute
AA
A
A (Two seconds)
3. Press B to change the currently selected setting.
x Holding down B scrolls the setting at high speed.
EN-16
Dual Time
Dual Time lets you set the current time in another time zone different from the time in
your current time zone.
x This means that your watch can be set up to display three times: digital time,
analog time, and Dual Time.
x The seconds count of the Dual Time is synced with the digital time seconds.
To configure Dual Time settings
1. In the Dual Time Mode, hold down A for at least two
seconds. This causes the hour digits to flash.
Hour
Minute
Second
EN-15
To stop the alarm
Press A or B to stop the alarm after it starts to sound.
To test the alarm
Hold down B in any mode to sound the alarm.
EN-14
x While the alarm/hourly time signal setting is selected, each press of B cycles
the setting in the sequence shown below.
Both on Both off Alarm only Hourly time
signal only
BBBB
4. Press A to return to the Alarm Mode.
The setting operation is complete when the screen stops flashing.
EN-13
2. Use A to select the setting item you want to change.
Alarm Mode Hour
Alarm/hourly time signal setting
Minute (tens digit)
Minute (ones digit)
A A
A
A (Two seconds) A
3. Press B to change the currently selected setting.
x Holding down B scrolls the setting at high speed.
EN-12
Alarm
When the Daily Alarm is turned on, the alarm sounds for 20 seconds at the preset
time each day. When the Hourly Time Signal is turned on, the watch beeps every
hour on the hour.
x Note that the Daily Alarm and the Hourly Time Signal operate based on the digital
time setting.
x The watch returns to the Timekeeping Mode automatically if you do not perform
any button operation for one or two minutes in the Alarm Mode.
To configure alarm and hourly time signal settings
1. In the Alarm Mode, hold down A for at least two
seconds. This causes the alarm hour digits to flash.
EN-11
You can also find
information about
operational procedures
at the CASIO website.
https://support.casio.
com/global/en/wat/
model/5696/
B
B
Dual Time Mode
Alarm Mode
EN-10
Selecting a Mode
x Press B to change the mode.
* SU: Sunday MO: Monday TU: Tuesday WE: Wednesday TH: Thursday FR: Friday
SA: Saturday
BB
B
Timekeeping Mode
Stopwatch Mode
Date Mode*
Operation Guide 5696
EN-22
Stopwatch:
Measuring units: 1/100 second
Measuring capacity: 59 minutes, 59.99 seconds (60 minutes)
Measuring modes: Elapsed time, cumulative elapsed time
Other:
Auto return to Timekeeping Mode; Test alarm
Battery:
SR920W x 1
Battery life: Approximately 3 years
Conditions:
– Alarm: Once (20 seconds)/day
Specifications are subject to change without notice.
EN-21
Specifications
Accuracy:
±30 seconds per month average.
Analog Timekeeping:
Hour, minute (moves every 20 seconds)
Digital Timekeeping:
Time: Hour, minute, second, switchable between 12-hour and 24-hour formats
Date: Month, day, day of the week (auto calendar)
Alarm:
Setting units: Hour, minute
Beeper: 20 seconds
Hourly time signal: Watch beeps every hour on the hour.
Dual Time:
Hour, minute, second, switchable between 12-hour and 24-hour formats
EN-20
Main Indicators
Number Name See
1PM indicator EN-6
2Alarm Mode EN-12
3Alarm on indicator EN-14
4Stopwatch Mode EN-19
5Dual Time Mode EN-16
6Hourly time signal on indicator EN-14
14
56
23
/