Jabra Evolve 75 SE - UC Stereo with Charging
Stand
How do I pair my Jabra Evolve 75 with my mobile device?
To pair your Jabra Evolve 75 with your smartphone, tablet, or other mobile
device, follow these steps.
1. Turn on the Bluetooth setting on your mobile device.
2. To enter pairing mode, hold (3 seconds) the On/off/Bluetooth switch in
the Bluetooth position until the LED flashes blue. Alternatively, wear
the headset to hear the pairing instructions.
The headset is now ready to pair with your mobile device.
3. To pair, go to the Bluetooth menu on your mobile device and select the
Jabra Evolve 75 from the list of available devices.
Enter “0000” (four zeros) if you are asked for a pin code.
Note
If pairing is not successful, try the pairing steps again, or try pairing with a
different Bluetooth device. For troubleshooting tips, see here.
Optionally, try using the Bluetooth Pairing Guide which provides detailed
steps for pairing with a mobile device.
23/10/2022 06:21
https://www.jabra.com/supportpages/jabra-evolve-75se/7599-848-199/faq/19a6ed4b-
86f5-402a-b669-d17dd2b6a5b9
Page 1 of 2
Applicable products
Jabra Evolve 75+ UC
Stereo
Jabra Evolve 75 UC
Stereo
Jabra Evolve 75 MS
Stereo
Jabra Evolve 75+ MS
Stereo
Jabra Evolve 75 SE -
MS Stereo
Jabra Evolve 75 SE -
MS Stereo with
Charging Stand
Jabra Evolve 75 SE -
UC Stereo
Jabra Evolve 75 SE -
UC Stereo with
Charging Stand
23/10/2022 06:21
https://www.jabra.com/supportpages/jabra-evolve-75se/7599-848-199/faq/19a6ed4b-
86f5-402a-b669-d17dd2b6a5b9
Page 2 of 2
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Jabra Evolve 75 SE User guide
-
Jabra Evolve 75 SE UC Stereo Operating instructions
-
Jabra Evolve 65 Stereo Wireless Headset User manual
-
Jabra Evolve 75 Operating instructions
-
-
-
Jabra EVOLVE 65 Operating instructions
-
-
-
Jabra 100-98510000-02 User manual