Pekatherm 0120D R Heating Overblanket User manual

Brand: Pekatherm

Model: 0120D R Heating Overblanket

Type: User manual

Pekatherm 0120D R Heating Overblanket is designed to provide warmth and comfort while you sleep. It features four temperature settings, so you can choose the perfect warmth for your needs. The overheat protection and automatic switch-off function ensure your safety during use, while the advanced heating technology and pain-relieving effects help you relax and de-stress. The blanket is machine-washable for easy care and maintenance.

Home » Pekatherm » pekatherm 0120D R Heating Overblanket User Manual 
Contents
pekatherm 0120D R Heating Overblanket
WASHING SYMBOLS
BEFORE USE
INSTALLATION INSTRUCTIONS FOR HEATING
OVERBLANKET
OPERATING INSTRUCTIONS
SAFETY AUTO-OFF
ADVICE ON TEMPERATURE
PEKATHERM TECHNOLOGY
TROUBLESHOOTING TABLE
CLEANING
STORAGE
TECHNICAL CHARACTERISTIC
Warranty Conditions
WEEE
Documents / Resources
1  References
Related Posts
pekatherm 0120D R Heating Overblanket
pekatherm 0120D R Heating Overblanket User Manual
Manuals+ —  User Manuals Simpliﬁed.

Dear customer, Thank you for purchasing our product. Please read the following instructions carefully before ﬁrst

use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have

any questions or comments about the device, please contact the customer line.

Congratulations on your purchase of a PEKATHERM product. Thank you for your conﬁdence in our products and

services. Please carefully read the instructions in this guide to ensure safe use and optimum performance of the

product, PEKATHERM team.

WARNING

Please, carefully read the instructions of use

Do not use when folded or creased

Do not stick pins, needles, or any other pointed objects

Never dispose of the product in the rubbish. Take it to a green collection point

Not suitable for children under 3 years

WASHING SYMBOLS

Hand and machine washable, max. 30°C. Gentle cycle

Do not bleach

Do not wring

Do not dry clean

Do not tumble dry

Hang without folding

Do not iron

These instructions provide information and advice on installation, use and maintenance of the product. Read them

carefully before using the product to ensure safe and proper use. Non observance of these instructions can cause

personal injuries, as well as product damage or destruction. Keep these instructions and pass them on with the

product if sold or lent to others.

BEFORE USE

After removing the packaging, inspect the product carefully to make sure it has no signs of damage caused

during transport. In case of any doubt, do not use the product take it to your dealer or to an authorized service

centre.

Before plugging the product in make sure your main’s speciﬁcations correspond to those of the product stated

on the label sewn into the heating part.

Use the control unit provided with the product, the reference of which is also stated on the label sewn into the

product. Do not attempt using control units from other appliances.

This product must not be used with sick or disabled persons, with persons incentive to heat or person with

restricted physical, sensory or mental capabilities. It also must not be used by children or by people lacking the

required experience and knowledge of product operation unless they are properly instructed on how to operate

the product safely, or unless the control unit is switched on and set by a responsible person. In all

circumstances, while using the product, children should always be supervised by and adult to prevent them

from playing with it.

Do not use the product under the eﬀects of alcohol, sleeping pills or sedatives.

Do not use the product on animals.

Do not apply the product to any areas of the body where the skin presents scars, wounds, inﬂammation, or any

other alteration due to illness. Consult your physician.

This product is designed for home use only. It is not intended for professional applications or medical use in

hospitals.

The product must only be used for warming beds in unfolded status. Any other use will be considered

hazardous. The manufacturer will decline all responsibility for any damage due to improper or incorrect use.

Pacemaker users should consult their physician before using the product.

Do not use the product folded or creased. Be careful when used on adjustable beds or twin mattresses. Do not

store the product creased.

Do not stick pins, needles, or any other sharp objects into the product.

Do not place heavy objects on the product. When the product is switched on, avoid putting heavy object on the

bed.

Never bring the product into contact with other sources of heat, such as other heating pads, underblankets, hot

water bottles, etc.

Do not cover the control unit while operating the product, do not place it on the heating elements or under it

while the unit is in operation.

Do not leave the product unattended while in operation.

In any case avoid wetting the control unit.

Do not touch the control unit with wet hands while the product is plugged in.

Do not use the product excessively humid environments or in environments where the risk of splashing liquids

on it is high (e.g. bathrooms, showers, swimming pools). In the presence of bottles or glasses with beverages,

take care not to splash them on the control unit.

Do not expose the product environmental agents (rain, sun, etc.)

Unplug the product from the mains when not in use.

Before cleaning the product make sure it is unplugged from the mains.

Cleaning instructions are found in speciﬁc section of this manual.

Protect the power cord from scraping against sharp edges and from coming into contact with very hot objects

that could damage it.

Do not pull on the power cord or use the heating parts itself to pull and unplug the product from the mains.

Do not hold the product by the power cord to move or carry it.

If the power cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualiﬁed

personnel in order to avoid and any hazard.

Inspect the product frequently for signs of wear or damage. If these signs appear, do not use the product, and

take it to an authorized service centre.

This product has no parts intended to be repaired or replaced by the used. If any part of the product fails, or the

product does not perform properly, or there is any other kind of anomaly, do not attempt to repair it and instead

take the product to an authorized service centre.

The product must be returned to the manufacturer or his authorized agent if the fuse of control unit has

raptured.

For any further information, please consult our customer serviced.

INSTALLATION INSTRUCTIONS FOR HEATING OVERBLANKET

Lay the product directly on the bed aligning it with the feet edge (see ﬁg. I). The power cord will come out from the

side, approximately at your shoulder level when lying down normally. Make sure the product has no folds or

creases. Check whether the power cord reaches the nearest mains socket. If necessary, you can turn the product

so that the power cord comes out at the feet side. Do not fold the product under the mattress. If possible, do not

use the product on adjustable beds or on twin mattresses; if this is the case, make sure the heating part and the

power cord do not get nipped or damaged.

OPERATING INSTRUCTIONS

1. Plug the product into the mains socket, making sure your mains’ speciﬁcations correspond to those of the

product stated on the label. First connect the power cord to the product and then to the mains socket. Use only

the control unit originally provided with the product.

2. If everything is correct the control unit is then automatically set at the level 0 which indicates that the product is

switched oﬀ. All LED indicators will go oﬀ.

3. Proceed to adjust the temperature among the four available settings by pushing the button on the control unit.

The LED indicator corresponding to the temperature. Setting you have selected will remain lit. At this pint the

product is running normally. After a few minutes you will be able to perceive warmth.

4. To switch oﬀ the product proceed to push the button until all the LED indicators are oﬀ (level 0). The heating

element remains switched oﬀ in this position. To turn the product on push the button. Remember to unplug the

product from the mains if you do not use it for a considerable period of time.

5. Unplug the product and let it cool down before folding it for storage.

SAFETY AUTO-OFF

To maximize safety when using the product, an additional safety switch oﬀ function has been incorporated into

every control unit. This function sets a maximum period of time for which the product can operate continuously.

The period is set for 12 hours for heating overbIankets. When this period has elapsed, the product will switch oﬀ

automatically. This reduces the risk to the user of spending too much time in contact with the heating element, as

well as the risk of leaving the product in operation unnecessarily. When the safety AUTO-OFF function is

activated, the heating element is switched oﬀ and the LED indicators of the controller go oﬀ. To restart the product,

push the control unit button.

ADVICE ON TEMPERATURE

Excessive heat continuously applied to the skin may produce skin burns. The maximum temperatures our

products can ever reach are those permitted by the current regulations. The heating overblankets reach

temperatures between 45°C and 55°C. (Note: all measures were collected in laboratory conditions with products

totally covered, according to procedures described in the EW60335-2- 17 Standard). It usually takes 45 to 60

minutes for the product to reach the maximum temperature. You can set the control unit at the maximum level to

obtain a faster warm up. Remember, however, that you should not use this setting continuously for more than one

hour. After that time, we recommend that you lower the temperature gradually. For overnight or continuous use we

recommend setting the unit at its lowest level (level 1). Beneﬁts provided by these products have little to do with

high temperatures and are based on a consistent, controlled low-level heat.

PEKATHERM TECHNOLOGY

This product family is specially designed to ensure a smooth low-level heat which, apart from comfort, provides

recognised pain-relieving eﬀects, since it dilates the blood vessels and enables muscular distension. The control

unit was designed and developed together with the heating elements to assure the best performance

TROUBLESHOOTING TABLE

When the product is plugged in, the indicators of the control unit do not light.

Check whether your mains socket has power, check whether the product is plugged in correctly. Unplug the

product and wait a few seconds, then plug it in again and push the button on the control unit to the desired

temperature setting.

The product does not warm up.

Make sure the product is operating by checking whether a LED indicator of the control unit is lit. Remember that

the safety AUTO-OFF function may have switched the product oﬀ if the safety time period is over. If all the LED

indicators are oﬀ, push the button to switch the product on. In case of any doubt, reset the product by unplugging

it from the mains and plugging it in after a few seconds. Remember that quick checks carried out with the product

uncovered are not reliable. Try cover the product with a blanket or a towel and wait at least 30 minutes. If you still

do not perceive heat, take the product to an authorized service centre.

After a period of proper functioning, the product stops warming, and all the LED indicators go oﬀ.

In order to ensure safety in use, all products are provided with a safety AUTO-OFF option which switches the

product oﬀ after 12 hours continuous operation. See SAFETY AUTO-OFF paragraph for details. If you want to

turn on the product, just push the button on the controller.

CLEANING

Before cleaning product remember to unplug it from the mains. Do not try clean the product. Do not use strong

detergents or cleaning agents containing solvents. Heating overblankets are hand or machine washable, after

having detached the control unit. The control unit is no washable. Prevent the control unit from getting wet or

moist. The product should not be used in case of wet or damp. If the product gets wet, do not wring it out to dry it,

do not use tumble dryers and never iron or switch the product on to dry it. To dry the product extend it ﬂat or hang

it on a line avoid folding it.

Machine washing: select a programme for delicate garments, at 30°C.

Hand washing: use a soft detergent and rub or brush softly and always in the direction of the internal wiring.

Never wring the product. After washing, to dry the product

To get smaller stains out you may prefer using a cleaning foam instead of washing. Apply the foam regularly on

the product’s surface using a moist cloth or sponge, and then brush it in the direction of the internal wiring.

STORAGE

Let the product cool down before folding it for storage. Store it in a cool dry place. Avoid excessive folds or

creases. Do not place any heavy objects on the product. Inspect the product (the control unit, the heating part,

and the power cord) frequently for signs of wear, damage, or misuse. If these signs appear, do not use the

product. Remember this product has no parts intended to be repaired or replaced by the user. Do not try to carry

out repairs and, instead, take the product to an authorized service centre.

Repair may only be carried out by our after sales service or at an authorized service centre. Improper repair may

cause considerable danger to the user. In the event of any doubt, please contact our customer service.

TECHNICAL CHARACTERISTIC

Model 0120D

Type Single

Size (cm) 170×130

Material Polyester

Temperature settings 4

Heating zones 1

Control units 1

Detachable Yes

Power (W) 100

Warranty Conditions

A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other

services during the warranty period, contact the product seller directly, you must provide the original proof of

purchase with the date of purchase.

The following are considered to be a conﬂict with the warranty conditions, for which the claimed claim may not be

recognized:
Using the product for any purpose other than that for which the product is intended or failing to follow the
instructions for maintenance, operation, and service of the product.
Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically
through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
Natural wear and aging of consumables or components during use (such as batteries, etc.).
Exposure to adverse external inﬂuences, such as sunlight and other radiation or electromagnetic ﬁelds, ﬂuid
intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply
or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies,
etc.
If anyone has made modiﬁcations, modiﬁcations, alterations to the design or adaptation to change or extend
the functions of the product compared to the purchased design or use of non-original components.
WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste
Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase
or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for the environment and human health, which
could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the
nearest collection point for further details. Improper disposal of this type of waste may result in ﬁnes in
accordance with national regulations.
www.alza.co.uk/kontakt
+44 (0)203 514 4411
Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Prague 7,  www.alza.cz
Documents / Resources
pekatherm 0120D R Heating Overblanket [pdf] User Manual
0120D R, Heating Overblanket, 0120D R Heating Overblanket, Overblanket
References
 Alza.sk – rýchly a pohodlný nákup odkiaľkoľvek | alza.sk
 alza.at
 alza.co.uk
 alza.de
 alza.hu