Kimo Class 120 KISTOCK User manual
- Category
- Measuring, testing & control
- Type
- User manual
Kimo Class 120 KISTOCK is a compact and versatile data logger designed for temperature and humidity monitoring in food transport and storage applications. It features an easy-to-read LCD display, programmable alarms, and USB connectivity for data transfer and configuration. With its IP65-rated housing, the KISTOCK is ideal for use in harsh environments, and its long battery life ensures continuous monitoring for up to 500 days.
Kimo Class 120 KISTOCK is a compact and versatile data logger designed for temperature and humidity monitoring in food transport and storage applications. It features an easy-to-read LCD display, programmable alarms, and USB connectivity for data transfer and configuration. With its IP65-rated housing, the KISTOCK is ideal for use in harsh environments, and its long battery life ensures continuous monitoring for up to 500 days.
Class 120 KISTOCK
KT 120 and KH 120
Table of contents
1 Safety instructions................................................................................................................................4
1.1 Precautions for use.......................................................................................................................4
1.2 Symbols used...............................................................................................................................4
2 Presentation of the device....................................................................................................................5
2.1 Use................................................................................................................................................5
2.2 Applications...................................................................................................................................5
2.3 Description of the device...............................................................................................................5
2.4 Description of the keys..................................................................................................................5
2.5 PC connection...............................................................................................................................5
2.6 Fixation..........................................................................................................................................6
3 Technical features................................................................................................................................6
3.1 Devices.........................................................................................................................................6
3.2 Housing.........................................................................................................................................7
3.3 Dimensions...................................................................................................................................7
3.4 Guarantee period..........................................................................................................................7
4 Use of the device..................................................................................................................................8
4.1 Display..........................................................................................................................................8
4.2 Functions of keys..........................................................................................................................8
4.2.1 Groups organisation............................................................................................................10
4.3 Datalogger configuration with the integrated PDF file................................................................10
4.4 Datalogger download with PDF report edition............................................................................13
4.5 Configuration, datalogger download and data processing with the KILOG software.................14
5 Device maintenance...........................................................................................................................15
5.1 Replace the battery.....................................................................................................................15
5.2 Device cleaning...........................................................................................................................15
6 Calibration..........................................................................................................................................16
7 Accessories........................................................................................................................................16
8 Troubleshooting..................................................................................................................................16
1 Safety instructions
1.1 Precautions for use
1.2 Symbols used
Safety instructions
2 Presentation of the device
2.1 Use
!" !"#$%& !'
&" !'
()*+
2.2 Applications
,)-%
.
,
/
$
,)-%0/
+
2.3 Description of the device
2.4 Description of the keys
“OK” key:
“Selection” key:
2.5 PC connection
Presentation of the device 1
“Selection” / “OK” /
()*
+
(
()*
2.6 Fixation
!" !,)-%.
3 Technical features
3.1 Devices
KT 120 KH 120
Units displayed 2%2 2%234"
Resolution !2%!2 !2%!2!34"
External input ()*
Internal sensor
Type of sensor 5% 5%
"
Measuring range 6!78!2% 6 !78!2%
"!!!34"
Accuracies*
9!2%
&6 !2%::78!2%'
9!;2%
&'
6 !!2%9 39!<2%
!=!2%9!12%
=!8!2%913
"Accuracy (Repeatability, linearity, hysteresis):
9 34"&12% 12%1>134"'
Factory calibration uncertainty: 9!;;34"
Temperature dependence:
9!!.&6 !'34"&?12%@ 12%'
Setpoint alarms
Number of points 1!!!!
Frequency of measurement
Working temperature 6!78!2% 6 !78!2%
Storage temperature 6!7;12%
Battery life =AA 1!!AA
European directives !B<1BC(4"),,D ! B>BC(ECCCD !!B!;BC%CF%D !!<B>1BC%
* All accuracies indicated in this document were stated in laboratory conditions and can be guaranteed for measurement carried out in the same conditions, or carried out with calibration
compensation.
** On the basis of 1 measurement each 15 minutes at 25 °C
<Technical features
F
3.2 Housing
Dimensions !!. 1.1>
Weight 1=
Display 6G%+
+= . 11
Control -/
)/
Material %
$*)
Protection ,<1 !
,!" !
PC communication ()*$
Battery power supply .%4 1!&'
Environmental conditions of use
$
"
F. !!!
3.3 Dimensions
3.4 Guarantee period
,)-%6&$60'
Technical features 8
4 Use of the device
4.1 Display
4.2 Functions of keys
OK key:&H='
Selection key:
Device
state
Type of start/stop
selected
Key
used
Action
generated Illustration
E
)/
)
+
,
)%
B
)
,
)
)
F
&
'A
;Use of the device
DATASET is finished
END
Indicates that one value is being recorded. It flashes: the DATASET did not start already.
REC
Flashing slowly: DATASET is between 80 and 90 % of the storage capacity.
Flashing quickly: DATASET is between 90 and 100 % of the storage capacity.
Constant: storage capacity full.
FULL
Constant: indicates that the batteries have to be replaced.
BAT
The displayed values are the recorded
maximum/minimum values for the displayed channels.
MIN
MAX
Indicates the alarm action type: rising or falling action.
Indicates the channel number which is measuring. Temperature in °C.
Temperature in °F.
Relative humidity (KH 120).
+=
+=
* Please see the summary table of the groups organization on page 10.
** Only with the KH 120.
-=
AA
The values to display selected during configuration via the software will scroll on the screen every 3
seconds (only with the KH 120).
The display can be activated or deactivated via the KILOG software.
At extreme temperatures, the display can become hardly readable and its display speed can slow down at
temperatures below 0 °C. This has no incidence on the measurement accuracy.
Device
state
Type of start/stop
selected
Key
used
Action
generated Illustration
+
)
)/
+
)
)
I
&
='A
)
)
I
&
='A
+
, ,
, F
A
* Please see the summary table of the groups organization on the following page.
** Only with the KH 120.
Use of the device >
REC
END
+=
+=
-=
AA
AA
4.2.1 Groups organisation
Group 1 Group 2 Group 3
F F.
F
"
G
FA F.
F
"
G
/
/
4.3 Datalogger configuration with the integrated PDF file
!,)-%+0/
,G-I
Required configuration: -5GJKAdobe Acrobat Reader 9 ®”
&'+C
➢ !,)-%()*AA
The following window opens:
➢%/“Open folder to view files”.
Wait a few seconds (according to the dataset number of points), and a volume appears.
➢+6/“Configuration...” +
* Only with the KH 120.
** The computer must be in compliance with the IEC60950 standard.
! Use of the device
The integrated configuration file opens:
•Choose the language
)0
•Choose the date format
)0
•General information
+
%
Use of the device
header
*load a
previous configuration
“General information”>
+
“Configuration”
6
6
6
“Channel parameters”
& !" !'
&
"L !'
•Configuration
4
Active screen: /“Yes”“No”
Management DST: +) tick “Yes” /“No”
,“Yes”“Next time change” +
.J/“Date”
%/0%/
“Hour”.
!!!!-/“+1h”
“-1h”
0
4
Interval:“Interval”0
&'
Start type
6/“Button”
6/“Date” 0%/
“Start date”/0
)
Stop type
)0
6,
“Date”0K)M/
0
6“Days”
“Hours”
60
,“Number of items”&1!!!!'
6“Total memory” 1!!!!
6“Loop”
6“Stop by button”/ “Yes”OK
/=/“No”
“Loop”“Total memory”
“Number of points”
%
Temperature (KT 120 and KH 120) and humidity (only the KH 120)
6%/“°C”“°F” .
6$/“Yes” “No”
6$/“Yes”“No”
, “High”“Low”
, “Delay”$
.
1
1
Use of the device
➢E/
➢%.
“Removable disk”
Check that the dataset is finished to ensure the new configuration is taken into account.
A message asks you to overwrite the existing file.
➢%/“Yes”.
➢0
/
0“.xdp”/.
4.4 Datalogger download with PDF report edition
➢ !,)-%()*A
Wait a few seconds, then the following window opens:
➢%/“Open folder to view files”
The windows explorer opens.
➢+6/“Report”+
* The computer must be in compliance with the IEC60950 standard.
Use of the device =
Example of report:
➢J.+
4.5 Configuration, datalogger download and data processing with the KILOG
software
KILOG“KILOG-classes-50-120-220-320”
Use of the device
The header
Device references
)
channel
statistics
.
F
alarms
parameters and
results
&-'
.
background
information
device
configuration
B
chart
State indicators:
>$
L$
L$-
L$
5 Device maintenance
5.1 Replace the battery
E1!!=A,)-%6
To replace the battery:
(/
//
= %
4&%4 1!AA'7
➢4/
//
Only use trademark or high quality batteries in order to guarantee the announced autonomy.
After the battery replacement, the device must be reconfigured.
5.2 Device cleaning
* On the basis of 1 measurement each 15 minutes at 25 °C
** The battery must be in compliance with the 60086-4 standard.
Device maintenance 1
*%4 1!
*G/
/
/
1 2 34
6 Calibration
$,)-%N+O
$
E/
7 Accessories
Accessories Part numbers Illustrations
%4 1! *G6 1!
,G-I ,G-I6=65
% 6 6
1
4F
Only the accessories supplied with the device must be used.
8 Troubleshooting
Problem Probable cause and possible solution
KMKM .
5 K-M%K-5M,G-I
&'
&1'
< Troubleshooting
5P/ !" !P!B!<B<P4%)& 'Q.=> ; !>156PE
-,F-0ECCC
BE CAREFUL! Material damages can happen, so please apply the precautionary measures indicated.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
Kimo Class 120 KISTOCK User manual
- Category
- Measuring, testing & control
- Type
- User manual
Kimo Class 120 KISTOCK is a compact and versatile data logger designed for temperature and humidity monitoring in food transport and storage applications. It features an easy-to-read LCD display, programmable alarms, and USB connectivity for data transfer and configuration. With its IP65-rated housing, the KISTOCK is ideal for use in harsh environments, and its long battery life ensures continuous monitoring for up to 500 days.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
sauermann KT 320 Owner's manual
-
-
-
-
-
sauermann KT 50 User guide
-
-
-
-
sauermann KT220 Class 220 Kistock Data Loggers User guide