User’s manual
Fruit Press
30162, 30163, 30164, 51739
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate insignificantly due to continuous further
developments.
© by WilTec Wildanger Technik GmbH Item 30162–30164, 51739 Page 2
http://www.toboli.com 10 2022-1
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man-
ual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this operating
manual is complete, accurate, and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
To return your goods for exchange, repair, or other purposes, please use the following address. Atten-
tion! To allow for a trouble-free complaint or return, it is important to contact our customer service team
before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
© by WilTec Wildanger Technik GmbH Item 30162–30164, 51739 Page 3
http://www.toboli.com 10 2022-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating manual
carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Notes
• All presses of this type cannot press entire fruits. A mash (heavily chopped fruit) must be pro-
duced, otherwise a successful pressing process is not possible.
• A wine or fruit press cannot be compared to a juice extractor. Both are completely different
devices. Grapes, for example, cannot be processed in a juicer because the seeds are destroyed
and bitter substances released. A fruit press is the only press that leaves the pits intact so that
the juice can be processed into wine.
• Apples, pears, and other types of fruit must be mashed before pressing. Whole, half, and quar-
tered fruits cannot be pressed. Spindle presses are not designed for this.
Parts list
A
B
C
D
E
F
G
H
I
J
K
L
M
N
© by WilTec Wildanger Technik GmbH Item 30162–30164, 51739 Page 4
http://www.toboli.com 10 2022-1
Quantities
The components A, B, C, D, H, J, K, M, and N are available once each.
Modell
Part E (pcs.)
Part F (pcs.)
Part G (pcs.)
Part I (pcs.)
Part L (pcs.)
51362
2
20
2
2
43
51363
2
25
2
2
53
51364
2
25
2
2
53
51739
3
25
2
4
78
Assembly
1. Assemble all wooden parts F and the red support rings E with the help of the screws L included.
Make sure that all bevelled edges point in the same direction.
After screwing all parts, place the bucket onto a level surface to check if all parts have the same
height and are properly fixed.
2. Screw the pressing plate D onto the wooden part H.
3. First assemble the bars M and N and screw them to the base plate A.
© by WilTec Wildanger Technik GmbH Item 30162–30164, 51739 Page 5
http://www.toboli.com 10 2022-1
4. Place the wooden bucket with the bevelled edges pointing upwards to the base plate assembled
and cover it with the pressing bag K before you go about pressing.
5. Put the mash into the wooden bucket and apply the both wooden plates G and wooden blocks
I. After this, apply the pressing plate (D, H).
6. Place the plastic ring J onto the pressing plate, then attach part B. Insert the red rod C in one
of the openings of part B and press the fruits by turning the handle clockwise.
© by WilTec Wildanger Technik GmbH Item 30162–30164, 51739 Page 6
http://www.toboli.com 10 2022-1
Technical specifications
Item number
30162
30163
30164
51739
Capacity (ℓ)
6
12
18
30
Height (㎜)
270
270
370
590
Weight (㎏)
7.3
11.5
14.5
18.4
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.
/
