PowerLocus P4 WIRELESS HEADPHONES

E-Mail: info@powerlocus.com

User Manual

Please read the instrucons before using the headset.

ITEMS IN THE BOX

1.Bluetooth Headphones

2.USB charging cable

3.Detachable audio cable

Press: Answer /Hang up

4.Charging

5.Indicator Light

6.Aux in

BUTTON ICONS:

1. Power Switch:

Connuous hold to turn on /off.

Quick press to Play /Pause

Quick press Answer incoming call

3.How to connect via Bluetooth?:

LED status

Flashing Blue/Red – Pairing mode

Constant Blue - Connected

3.1 Pair with new device

Step 1: Turn on the headphones, they will enter pairing mode automacally.

Step 2: Open the Bluetooth sengs on your phone or tablet and click “search device”. Your phone will search for

Bluetooth devices automacally.

Step 3: You have found the product when the screen displays “PowerLocus P4+”. Click on it to pair the devices.

Step 4: The phone or tablet will indicate when the pairing is successful. The LED light of the product will change from

Please make sure the product is fully charged for the first use. Charge the product with the provided USB cable which

is compable with any computer or other MAX 5V output charger.

The Bluetooth Indicator will be in red while charging.

When the baery is fully charged it will turn off.

1.Charging me: about 2-2.5 hours

2.When using for the first me, charging for more than 1-2 hours is mandatory.

3.Please charge the product if it has not been used for a long me (more than a month)

4.Please keep away from fire and water.

5.To prevent possible hearing damage, do not listen at high volume levels for long periods. Do not use the

residenal installaon. This equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instrucons, may cause harmful interference to radio communicaons. However, there is no

guarantee that interference will not occur in a parcular installaon. If this equipment dose cause harful interfrerence to

radio or television recepon, with can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separaon between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consule the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operaon is subject to the following two condions:

This transmier must not be co-located or operang in conjuncon with any othere antenna or transmier.