2. Eurolux
  3. P749

Eurolux P749 Owner's manual

  • Hello! I have reviewed the user manual for the Eurolux Pendant P749. This document provides instructions for installing and using the luminaire, which is intended for indoor use and requires proper earthing. The manual also specifies the maximum lamp wattage and voltage, as well as recommendations for cleaning and safe operation. I'm ready to answer your questions about the Pendant P749.
  • What type of lamp does this pendant require?
    Is the pendant suitable for outdoor use?
    Does this product require earthing?
    Can I use this in an area exposed to moisture?
Pendant
Excluding: 1 x E27 max 40W 220V – 240V
ILLUSTRATIONS
P749
PRODUCT CODE
ENVIRONMENTAL PROTECTION
Waste electrical & Electronic equipment regulations requires that any of our products showing this
marking must not be disposed of with other household or commercial waste. To prevent possible
harm to the environment or human health from uncontrolled waste disposal, please separate any
such products from other waste types and recycle it responsibly at your local facilities.
Please read instructions before commencing installation and retain for
future reference.
Cape Town - 9 Racecourse Road, Milnerton, 7441
Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
email: [email protected] web: www.eurolux.co.za
•FittingMaterial: Gypsum
•Lamptype: Excluding: 1 x E27 max 40W
• Voltage: 220-240V ~ 50/60Hz
•Protectionagainstelectricshock: Class 1. Requires earthing.
•IPRating: 20. Protected against solid foreign objects of 12.5mm Ø and greater, not
protected against water
• Commercial / domestic use
• Not suitable for outdoor use
• Not suitable for use in areas exposed to moisture
•MaximumAmbienttemperaturerange: 20ºC - 40ºC
•Dimensions: (H)170mm x (Ø)250mm
•Maxcordlength:1500mm
P749-attachments:
If the external exible cable or cord of this luminaire is damaged, it should be exclusively replaced
by the manufacturer or his service agent or a similar qualied person in order to avoid a hazard.To
ensure that you get maximum longevity and maximum use out of your luminaire, please observe
the following safety instructions.
Electrical products can cause death, injury, or damage to property. Installation of the luminaire
must be carried out by a qualied electrician, in accordance with SANS 10142. On completion
of installation, ensure that the Certicate of Compliance is updated.
• Before connecting this luminaire, ensure that voltage indicated on the rating label corresponds
with the mains voltage in your home.
• When changing the lamp, ensure that the power is turned off.
• This luminaire is checked in full for conformity to the quality standards and safety requirements.
• The manufacturer / supplier is not responsible for any damage of properties and persons,
caused by the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a professional
electrician or your supplier for assistance.
• Ensure all items/ components, threads and screws are tightly secured.
IMPORTANT:
• Tampering with this luminaire, IE. Using silicon sealers or incorrect cabling, will invalidate
your warranty.
• When the protection glass is damaged, it should be replaced immediately. The luminaire
must not be used without the protection glass.
• Please check whether the connection of the power cord is safe and reliable before installation.
• Always ensure that the mains supply voltage is correct.
• Always replace the lamp with one of an identical rating.
• Ensure that you do not place the luminaire near any combustible materials and / or surfaces.
• Choking hazard: May contain small parts. Keep away from children.
SPECIFICATIONS
IMPORTANT SAFEGUARDS
INSTALLATION
CLEANING
• Before cleaning always ensure the power supply is turned off.
• Do not immerse the luminaire in water.
• No abrasive products, solvents, detergent may be used to clean this luminaire.
• Ensure that the tting does not come in contact with corrosive chemicals, etc.
• Coastal areas ensure that the luminaire is cleaned fortnightly.
• Before installation always ensure the power supply is turned off.
• This luminaire is only suitable for xed mounting.
• Not for use outdoors or in areas exposed to moisture
• Choose a solid base where to install the xture tightly.
• Test to ensure the mounting surface will hold the weight of the tting.
• Fasten the base on to the Ceiling.
• Insert masonry plugs into the mounting surface.
• Connect power supply wires to the terminal block, observing
the colour code. Brown, Red to live / Blue, Black to neutral.
• Fix the bracket into the mounting surface with self-tapping screws.
• Fix the lamp into the lamp holder.
• Reconnect power supply.
• Do not insert your ngers or any part of your body into the electrical contact and sockets of
this product whilst it is connected to the electricity supply.
• Item may vary slightly from the picture on the carton.
/