2. Eurolux
  3. W391

Eurolux W391, W392, W393 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Eurolux W391 Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Cape Town - 9 Racecourse Road, Milnerton, 7441
Johannesburg - 10 Milkyway Avenue, Linbro Business Park, Sandton, 2065
www.eurolux.co.za
Wall Light
Excluding: E14 maximum 40W
W391 / W392 / W393
MODEL
MW-8322 / MW-8185 / MW-8159
PRODUCT CODE
MODEL
• Before cleaning always ensure the power supply is turned off.
• Do not immerse the luminaire in water.
• Do not use detergent or abrasives for cleaning.
• Use a soft white cloth to clean.
CLEANING
• Fitting: White moulded gypsum.
• Lamp Type: 1 x E14 maximum 40W .
• Voltage: 230V~50Hz.
• IP: 20. Protected against solid foreign objects of 12.5mm Ø and greater, not
protected against water.
• Class: 1.
Protection against electric shock: Requires earth connection.
• Dimensions:
W391: 225mm X 180mm X 95mm
W392: 300mm X 160mm X 80mm
W393:325mm X180mm X 100mm
Luminaire attachments:
If the external exible cable or cord of this luminaire is damaged, it should be
exclusively replaced by the manufacturer or his service agent or a similar qualied
person in order to avoid a hazard.
To ensure that you get maximum longevity and use out of your luminaire, please
observe the following safety instructions.
Please save this instruction manual.
Electrical products can cause death, injury, or damage to property.
Installation of this product must be carried out by a qualied electrician, in
accordance with SANS 10142. On completion of installation, ensure that the
Certicate of Compliance is updated.
• Before connecting this light tting, ensure that voltage indicated on the rating label
corresponds with the mains voltage in your home.
• When changing the E14 lamp, ensure that the power is off.
• This luminaire was checked in full for conformity to the quality standards and
safety required.
• The manufacturer / supplier is not responsible for any damage of properties and
persons, caused by the incorrect use or installation of the luminaire.
• Should you be unsure of how to install this luminaire correctly, please consult a
professional electrician or your supplier for assistance.
• Ensure all items and screws are tightly secured.
• PLEASE NOTE: Tampering with this luminaire will void your warranty.
SPECIFICATIONS
IMPORTANT SAFEGUARDS
INSTALLATION
1
3
5
N
L
2
4
/