Sony HT-CT180 User manual

Type
User manual

This manual is also suitable for

HT-CT180 4-559-024-21(1)
Startup Guide
Sound Bar
HT-CT180
Supplied accessories
Remote control (1)
R03 (size AAA) batteries (2) Optical digital cable (1)
Speaker pads for the subwoofer (4)
Speaker pads
To mount the Bar Speaker on a wall
Refer to the supplied Operating Instructions.
To install the subwoofer horizontally
Place the subwoofer on the left side with the
"SONY" logo facing front.
2 Setting up the remote control
3 Turning on the system


Connect the AC power cords (mains leads).

Press the

(on/standby) button.
An input indicator lights up.
Confirm that the on/standby indicator of the subwoofer is lit in green. When the indicator turns on, wireless connection of the Bar Speaker
and the subwoofer is completed. If it does not turn on, the wireless transmission is not activated. Refer to “Subwoofer wireless sound” of
“Troubleshooting” in the supplied Operating Instructions.
4 Listening to the sound
OPTICAL
Press the OPTICAL button to turn on the OPTICAL indicator. Then, press the (volume) button to adjust the volume.
If you connected your TV to the ANALOG jack in step 1, press the ANALOG button.
Setup completed! Enjoy!
Please see the supplied Operating Instructions about the
BLUETOOTH connection, and other functions.
Operating Instructions
© 2015 Sony Corporation Printed in China
4-559-024-21(1)
Bar Speaker
Subwoofer
1 Connecting with a TV
Is there an optical digital jack on your TV?
Optical digital cable (supplied)
YES
NO
Analog audio cable (not supplied)
TV, cable box or satellite box TV, cable box or satellite box
Note
If the TV's headphone jack also serves as an audio output jack, check the TV's audio output settings.
For details, refer to the TV's operating instructions.
  • Page 1 1

Sony HT-CT180 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI