Roland VR-3EX is a versatile video switcher designed to enhance your video productions with seamless transitions, professional effects, and multi-camera capabilities. With its intuitive interface and advanced features, the VR-3EX empowers you to create dynamic live streams, presentations, and events. Connect multiple video sources, including cameras, computers, and media players, and effortlessly switch between them using the dedicated input buttons or the included software.
Roland VR-3EX is a versatile video switcher designed to enhance your video productions with seamless transitions, professional effects, and multi-camera capabilities. With its intuitive interface and advanced features, the VR-3EX empowers you to create dynamic live streams, presentations, and events. Connect multiple video sources, including cameras, computers, and media players, and effortlessly switch between them using the dedicated input buttons or the included software.
Contents
Before Use .......................................................2
System Requirements ............................................2
Connecting a Computer Via USB ..................................2
Starting and Shutting down the VR-3EX RCS .......................3
Names and Functions ............................................4
Backing Up/Restoring the VR-3EX’s Settings .......................5
Updating the System Software of the VR-3EX ......................6
Copyright © 2014 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.
* Roland is either registered trademark or trademark of Roland Corporation in the United States and/or
other countries.
* Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation.
* Apple, Macintosh, Mac OS, the Mac logo are either registered trademarks or trademarks of Apple Inc.
VR-3EX RCS Owner’s Manual
2
Before Use
The VR-3EX RCS software is designed to control the VR-3EX using a computer.
By connecting the VR-3EX to your computer via USB, you will be able to copy settings (backup) or update the system software of the VR-3EX in
addition to remote controlling the unit from your computer.
System Requirements
Operating System
Windows
Windows XP Home Edition / Professional Service Pack 3 or later
Windows Vista Service Pack 2 or later
Windows 7 Service Pack 1 or later
Windows 8
Windows 8.1
Mac Mac OS X 10.7 or later
CPU
Windows
Pentium/Celeron 1.6 GHz or higher
* No assurance is made regarding the compatibility of compatible processors themselves.
Mac Intel Processor
RAM 512 MB or more
Graphics
1024×768 dots or more
65,536 color (16-bit color) or more
USB Port Hi-speed USB (complaint with USB 2.0) is recommended.
* Connection and operation of the VR-3EX with standard computers running the operating systems described above have been veried, but
connection and operation with all computers satisfying such conditions is not assured. Connection or operation may be impossible due to
dierences in setting specications or the usage environment that are specic to the equipment.
Connecting a Computer Via USB
* Making the connection using an extension cable or USB hub might result in the computer failing to recognize the VR-3EX. We recommend using a
direct connection between the VR-3EX and the computer.
1. Using a USB cable, connect a USB 2.0 port on the computer to the USB port on the VR-3EX.
USB2.0
port
2. Turn on the power to the VR-3EX.
3. Start the computer.
4. Wait for communication between the VR-3EX and the computer to be established.
When communication with the computer starts, the operating system’s standard driver is automatically installed
3
Starting and Shutting down the VR-3EX RCS
Starting the VR-3EX RCS
1. On the computer, double-click “VR-3EXRCS.exe” icon.
The VR-3EX RCS will be started and the VR-3EX RCS window will appear on the desktop.
2. In VR-3EX RCS, click [Control ON] button.
The [Control ON] button lights up, and you can now operate the VR-3EX remotely using VR-3EX RCS.
NOTE
If the following symptoms occur, check the values of the settings at the MIDI menu on the VR-3EX.
Problem
MIDI menu ([MENU] button g <MIDI>)
Setting item Value
The [Control ON] button does not light up.
COM: Rx SOURCE Set to “USB”
STD: Rx CHANNEL Set to “other than OFF”
The [Control ON] button lights up, but
remote control is not possible.
COM: Tx CHANNEL The setting value is the same as for “STD: Rx CHANNEL”
Shutting down the VR-3EX RCS
1. Click the “Close” button ( button) for the VR-3EX RCS window.
VR-3EX RCS will quit.
VR-3EX RCS Owner’s Manual
4
Names and Functions
6
2
3
4
5
7 8 9
1 1
No. Name Explanation Page
1
[Control OFF] button
[Control ON] button
These turn the remote control functioning of VR-3EX RCS on and o.
Selecting the [Control ON] button (making it light up orange) enables remote control of the VR-3EX from
VR-3EX RCS.
To end remote control of the VR-3EX and enable operation using the panel on the unit, select the
[Control OFF] button (making it light up orange).
p. 3
2
[VIDEO SELECT] buttons Select input channel of the VR-3EX.
-
3
[TRANSITION] buttons Select transition type of the VR-3EX.
-
4
[TRANSITION TIME] slider Adjust transition time of the VR-3EX.
-
5
[OUTPUT FADE] sliders These apply fade (black/white) to the main output video.
-
6
[AUDIO LEVEL] faders These adjust the volume level of input/output audio.
-
7
[Backup] button This backs up the VR-3EX’s settings to a computer. p. 5
8
[Restore] button This restores backed-up data on a computer to the VR-3EX. p. 5
9
[Update] button This updates the VR-3EX’s system program. p. 6
5
Backing Up/Restoring the VR-3EX’s Settings
You can back up the values of settings on the VR-3EX to a computer connected via USB. You can then restore the backed-up data to the VR-3EX when
needed.
Backing Up
1. In VR-3EX RCS, click [Backup] button.
A popup dialog box appears.
2. On the VR-3EX, touch [MENU] g <MIDI> g <STD: Tx BULK
DUMP>.
3. Press the [VALUE] knob on the VR-3EX.
The settings on the VR-3EX are sent to the computer. When sending
nishes, a popup dialog box appears.
4. In the popup dialog box, click [Save] button.
(To quit without backing up, click [Cancel] button.)
A dialog box for saving the le appears.
5. Specify the destination for saving the le and a le name
(*.txt), then click [OK] button.
The VR-3EX’s setting are backed up as a le on the computer. When
the message “Complete” appears, the operation has nished.
Restoring
NOTE
Restoring backed-up data overwrites the current values of
settings on the VR-3EX.
1. In VR-3EX RCS, click [Restore] button.
A popup dialog box appears.
2. In the popup dialog box, click [Load] button.
A dialog box for selecting the le appears.
3. Select the backed-up data to restore, then click [OK]
button.
A popup dialog box appears
4. On the VR-3EX, touch [MENU] g <MIDI> g <STD: Rx BULK
DUMP>.
5. Press the [VALUE] knob on the VR-3EX.
6. In the popup dialog box, click [Send] button.
(To quit without restoring, click [Cancel].)
The restore operation is executed. When the message “Complete”
appears, the operation has nished.
VR-3EX RCS Owner’s Manual
6
Updating the System Software of the VR-3EX
How to tell the version
1. On the VR-3EX, go to “MENU” and select <SETUP> and then
<VERSION> to check the version information.
* Don’t perform the update if the product is already up-to-date.
2. Turn o the power of the VR-3EX.
Getting the update le
Download the system program le for the VR-3EX from the following
Roland website.
Upgrade information for the system program is provided at the
Roland website.
http://www.roland.com/support/
Updating the System Software
NOTE
Never turn o the VR-3EX’s power while the update is in
progress. Otherwise the system program or the VR-3EX itself
may be destroyed.
1. Using a USB cable, connect the VR-3EX and the computer.
2. Power-on the VR-3EX while pressing the [MENU] and
MONITOR [OUTPUT] buttons on the VR-3EX.
The audio channel 3 [SETUP] button on the VR-3EX ashes.
3. Start VR-3EX RCS, and then click [Update] button.
The Update dialog box appears.
• Verify that “Update Mode” is displayed in the “VR-3EX:” eld.
• When the VR-3EX eld displays “---”, disconnect the USB cable and
connect it again.
4. Drag the program le (vr3ex_ver****.bin) to the Update
dialog box and drop it.
The version information for the update le is displayed.
5. Go to the Update dialog box and click the [Update] button.
(To quit without updating, click [Cancel] button.)
The update starts.
When the update is completed, the message “Update Complete”
appears and the VR-3EX is automatically powered-o.
6. Turn on the power to the VR-3EX.
Follow the procedure described in “How to tell the version” on this
page to verify that the update has been applied.
1PS
-
1
-
2
-
3
-
4
-
5
-
6
Roland VR-3EX is a versatile video switcher designed to enhance your video productions with seamless transitions, professional effects, and multi-camera capabilities. With its intuitive interface and advanced features, the VR-3EX empowers you to create dynamic live streams, presentations, and events. Connect multiple video sources, including cameras, computers, and media players, and effortlessly switch between them using the dedicated input buttons or the included software.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Lenovo ThinkPad Edge E420 Hardware Maintenance Manual
-
Lenovo ThinkPad X100e User manual
-
Magtech MLS-3, MLS-3Ex Level Switches Owner's manual
-
-
Lenovo 3093AC6 User manual
-
Lenovo T510 + 3Yr On-site NBD Product information
-
-
-
Lenovo THINKPAD L420 Hardware Maintenance Manual
-
