TOA CS-64U User manual

CS-64U
TOA
Brand
TOA
Model
CS-64U
Category
Loudspeakers
Type
User manual

TOA CS-64U is a wide-range speaker featuring a resin enclosure and stainless steel hardware for all-weather durability. Ideal for outdoor use, it combines the weather resistance of horn speakers with the high sound quality of cone speakers. With a rated input of 6W and a frequency response of 130 – 13,000 Hz, it delivers clear and powerful audio. Installation is simple, and the speaker can be mounted on a wall or under eaves or ceilings.

TOA CS-64U is a wide-range speaker featuring a resin enclosure and stainless steel hardware for all-weather durability. Ideal for outdoor use, it combines the weather resistance of horn speakers with the high sound quality of cone speakers. With a rated input of 6W and a frequency response of 130 – 13,000 Hz, it delivers clear and powerful audio. Installation is simple, and the speaker can be mounted on a wall or under eaves or ceilings.

Thank you for purchasing TOA's Wide Range Speaker.
Please carefully follow the instructions in this manual in order to ensure long, trouble-free use of
your equipment.
CS-64U
WIDE RANGE SPEAKER
INSTRUCTION MANUAL
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Be sure to follow all the precautionary instructions in this section, which contain important warnings and/or
cautions regarding safety.
• After reading, keep this manual handy for future reference.
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
• Install the speaker only in a location that can structurally support the weight of the speaker and the mounting
bracket. Doing otherwise may result in the speaker falling down and causing personal injury and/or property
damage.
• Do not stand or sit on, nor hang down from the speaker as this may cause it to drop, resulting in personal
injury and/or property damage.
• Do not operate the speaker for an extended period of time with the sound distorting. This is an indication of a
malfunction, which in turn can cause heat to generate and result in a fire.
3. APPEARANCE AND DIMENSIONS 4. WIRING DIAGRAM
233
224
205
210
35
ø13
51 51
2-ø11
146
208
121.5
600
Black White
Unit: mm
Black (+)
White (–)
10 kΩ
3.3 kΩ
1.7 kΩ
830 Ω
8 Ω
0
Rotary switch
Matching
transformer
MT-511
Speaker
component
BST-232
Note: The rotary switch is factory-preset to 1.7 kΩ.
2. GENERAL DESCRIPTION AND FEATURES
TOA's CS-64U outdoor speaker features a resin enclosure and stainless steel hardware for all-weather
durability. It is designed to offer the weather resistance and high efficiency of horn speakers combined with
the high sound quality of cone speakers.
Printed in Indonesia
533-06-110-50
5. IMPEDANCE CHANGE
The input impedance is factory-preset to 1.7 kΩ.
To change the impedance, change the rear
panel-mounted rotary switch position to the
desired impedance (wattage) using a standard
screwdriver.
Notes
• This speaker is designed to operate on a 70 V
or 100 V line. Do not connect it to the
amplifier's low impedance line.
• No sound is output when the switch is set to
the OFF position.
Caution
Never set the switch to "
–
" position for 100 V
line operation, as doing so may result in damage
to the speaker.
8. SPECIFICATIONS
* Impedance for 70 V line
Note
The design and specifications are subject to
change without notice for improvement.
Speaker Component 12 cm cone speaker
Rated Input 6 W
Impedance (830 Ω)*, 1.7 kΩ, 3.3 kΩ, 10 kΩ
Frequency Response 130 – 13,000 Hz
Sensitivity 96 dB (1 W, 1 m)
Finish Body ABS resin, off-white, paint
Bracket Stainless steel
Net Zinc-coated steel, gray, paint
Dimensions 233 (w) x 224 (h) x 208 (d) mm
Weight 1.5 kg
Line Voltage
Imp.
70 V 100 V
6 W – 830 Ω
3 W 6 W 1.7 kΩ
1.5 W 3 W 3.3 kΩ
0.5 W 1 W 10 kΩ
← Factory-preset values
OFF
OFF
1W
3W
6W
100V
0.7W
1.5W
3W
6W
70V
10kΩ
3.3kΩ
1.7kΩ
830Ω
IMP.
LINE VOLTAGE
Wall surface
Ceiling surface
• Be sure to direct the speaker
down towards the ground.
Otherwise, rain floods the
speaker, causing its failure.
• No mounting hardware such as
bolts and nuts is supplied with
the speaker.
Use commercial mounting
hardware appropriate for the
installation environment.
• Please install only with either
flexible conduit or flexible
wiring.
7. INSTALLATION
[Mounting on the Wall] [Mounting under the Eaves
or on the Ceiling]
6. CONNECTION
Make the connections using marrets (wire nuts)
inside a UL Listed junction box.
Note
This product shall be installed in accordance with
the National Electrical Code, ANSI/NFPA 70.
UL Listed Junction Box
(–)
(–)(+)
(+)
Marrets (wire nuts)
From Speaker
From Amplifier
  • Page 1 1
  • Page 2 2

TOA CS-64U User manual

CS-64U
TOA
Brand
TOA
Model
CS-64U
Category
Loudspeakers
Type
User manual

TOA CS-64U is a wide-range speaker featuring a resin enclosure and stainless steel hardware for all-weather durability. Ideal for outdoor use, it combines the weather resistance of horn speakers with the high sound quality of cone speakers. With a rated input of 6W and a frequency response of 130 – 13,000 Hz, it delivers clear and powerful audio. Installation is simple, and the speaker can be mounted on a wall or under eaves or ceilings.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents