Bauknecht WFW97HEXL Owner's manual

Page is loading ...

2

WASHER SAFETY

FRONT-LOADING

AUTOMATIC WASHER

TABLE OF CONTENTS

WASHER SAFETY ................................................................................. 2

ACCESSORIES ...................................................................................... 3

CONTROL PANEL AND FEATURES ........................................................ 4

CYCLE GUIDE ....................................................................................... 6

USING YOUR WASHER ........................................................................ 8

MY CYCLE AND SPECIALTY CYCLES .................................................... 12

WASHER MAINTENANCE .................................................................. 13

ABOUT DETERGENT CONCENTRATION ............................................. 16

USING THE BUILT-IN HELP FEATURE ................................................. 17

TROUBLESHOOTING ......................................................................... 17

WARRANTY ....................................................................................... 18

ASSISTANCE OR SERVICE ..................................................... Back Cover

LAVEUSE DE

CHARGEMENT FRONTAL

TABLE DE MATIèRES

SÉCURITÉ DE LA LAVEUSE ................................................................. 19

TABLEAU DE COMMANDE ET CARACTÉRISTIQUES ........................... 20

GUIDE DES PROGRAMMES ............................................................... 22

UTILISATION DE LA LAVEUSE ............................................................ 24

MON PROGRAMME ET PROGRAMME SPÉCIAUX ............................. 29

ENTRETIEN DE LA LAVEUSE .............................................................. 30

À PROPOS DE LA CONCENTRATION DU DÉTERGENT ........................ 33

UTILISATION DE LA CARACTÉRISTIQUE DE DÉPANNAGE INTEGRÉE.. 34

DÉPANNAGE ..................................................................................... 35

ACCESSOIRES .................................................................................... 36

GARANTIE ......................................................................................... 39

ASSISTANCE OU SERVICE ........................................ Couverture arrière

3

ACCESSORIES

Enhance your new washer and dryer with the following genuine

Whirlpool accessories. For more information on options and

ordering, call 1-800-901-2042, or visit us at:

www.whirlpool.com/accessories. In Canada, call

1-800-807-6777 or visit us at www. whirlpoolparts.ca

15” Pedestal

Color matched pedestals raise

the washer and dryer to a more

comfortable working height.

The large drawer provides

convenient storage.

Available in matching colors.

Stack Kit

If space is at a premium,

the stack kit allows the dryer

to be installed on top of

the washer.

Worksurface

The worksurface bridges

the washer and dryer, and

provides a convenient working

and storage area.

Precison Dispense Liquid HE Detergent Cartridge

If you frequently alternate between two

different liquid HE detergents, you may

also purchase an additional cartridge,

part number W10250743A.

4

Normal/Casual

59min

Press and hold START/PAUSE to begin cycle.

Warm/Cold

Te mperature

Extra High

Spin Speed

Normal

Soil Level

O

Stain Treat

Estimated

Cycle Time

CONTROL PANEL AND FEATURES

POWER

Press to turn the washer on and off.

Press to stop/cancel a cycle at any time.

NOTE: When the washer is turned on for the rst time after

being plugged in or after a power outage, please allow a

minute or so for the washer display to start up.

START/PAUSE

Press and hold to start a cycle, or press once while a cycle

is in process to pause it for up to 5 minutes.

PRECISION DISPENSE

This button is used to adjust the dispenser settings,

including adjustments for detergent concentration and

water hardness level.

IMPORTANT: When using the dispenser cartridge with

concentrated liquid detergent, be sure to change the

detergent concentration settings in the control if the detergent

used is different than factory preset of 2x concentration.

COLOR LCD DISPLAY SCREEN

This screen will display current options and settings, cycle

information, and estimated time remaining. You can also

use the navigation buttons below and on either side of the

screen to access helpful laundry and troubleshooting tips,

as well as other information.

6

9

1

2

3

5

8

7

3

4

2

1

4

5

C

B

A Precision Dispense Ultra

liquid HE detergent cartridge

B Powdered HE detergent compartment

C Liquid fabric softener

D Chlorine bleach

10

D

A

SYSTEM SETTINGS

The System Settings button allows you to adjust the LCD

display settings, including brightness and other preferences.

Under System Settings, you can access the following

functions:

Control Lock

Allows you to disable all controls except the power button

to avoid unauthorized use or changes to running cycles.

End of Cycle

Adjusts the volume of the End of Cycle signal, or turns

it off.

Button Sound

Adjusts the volume of the button sounds, or turns

them off.

Brightness

Adjusts the brightness of the LCD screen.

Language

Displays information in English, French, or Spanish.

Themes

Select between two different display color and

background themes.

5

LCD CONTROLS

Use these buttons to select options displayed in the LCD

screen, and to navigate through options.

BACK

Press the BACK button to go back to the previous screen

without accepting any changes made on the current

screen. Press and hold for 1 second to return to the

start-up screen for the selected cycle.

MORE INFO

Press to get more information on a setting or option.

Press MORE INFO again to return to the previous screen.

and BUTTONS

Button

Press the button when the arrow is lit to go back to the

previous set of options or settings.

Button

Many screens have more than 4 selections.

Press the button when the arrow is lit to show

additional options or settings.

SELECTION BUTTONS

Use the four selection buttons to choose options or

settings displayed on the LCD screen.

ECOBOOST

Press to activate the EcoBoost option. The EcoBoost

™

option

provides additional energy savings through reduced hot wa-

ter usage and maintains cleaning performance by lengthen-

ing the wash time on some cycles.

NOTE: Press and hold the EcoBoost button for 3 seconds

to turn the drum light on or off.

WASH CYCLE KNOB

Use your Wash Cycle Knob to select available cycles on your

washer. Turn the knob to select a cycle for your laundry load.

See “Cycle Guide” for detailed descriptions of cycles.

FANFRESH

Select the FanFresh option to periodically tumble the load

after the end of the cycle for up to 16 hours while the

integrated fan removes moisture from the washer. FanFresh

may also be started immediately without running a cycle rst

by pressing the power button then the FanFresh button and

following the on-screen instructions.

When to use FanFresh:

• Whenyoucan’tremovetheloadfromthewasherright

away to help avoid musty odor build-up.

• CombinedwiththeQuickWashcycle,youcanwash

and dry a small load of many common lightweight items

overnight to save time and energy.

6

7

8

9

Normal/Casual

59min

Press and hold START/PAUSE to begin cycle.

Warm/Cold

Te mperature

Extra High

Spin Speed

Normal

Soil Level

O

Stain Treat

Estimated

Cycle Time

10

Precision Dispense Ultra Cartridge

Each dispenser cartridge holds up to 20 oz. of liquid HE

detergent, enough for up to 36

†

loads, depending on

cycle and detergent concentration. The cartridge ts

into compartment B of the dispenser drawer for

convenient loading.

n

Change detergent concentration setting

if detergent used is different than factory

preset of 2x concentration.

n

Change water hardness setting if desired

level is different than factory preset of normal.

Powdered High Efciency “HE” detergent

compartment

This compartment holds powdered HE detergent

for a single load.

Liquid fabric softener compartment

Automatically dilutes and dispenses liquid fabric

softener at the optimum time in the cycle.

n

Use only liquid fabric softener in this dispenser.

Liquid chlorine bleach compartment

Automatically dilutes and dispenses liquid chlorine

bleach at the optimum time during the rst rinse

after the wash cycle. This compartment cannot dilute

powdered bleach.

B

D

A

PRECISION DISPENSE ULTRA DRAWER

The Precision Dispense Ultra drawer gives you the

convenience of automatically adding HE detergent, liquid

chlorine bleach, and fabric softener to the wash load at the

proper time. See “Using the Dispenser” for information on

using the dispenser drawer.

C

Choosing the Right Detergent

Use only High Efciency detergents. The package will be

marked “HE” or “High Efciency.” Low-water washing creates

excessive sudsing with a regular non-HE detergent. Using regular

detergent will likely result in longer cycle times and reduced

rinsing performance. It may also result in component failure and,

over time, build-up of mold or mildew. HE detergents are made

to produce the right amount of suds for the best performance.

Followthemanufacturer’sinstructionstodeterminetheamount

of detergent to use.

Use only High Efciency (HE) detergent.

†

The number of loads will vary, depending on detergent concentration,

load size, cycle used, and soil level. The maximum capacity of up to

36 loads requires use of 6x concentration detergent.

6

CYCLE GUIDE — STANDARD CYCLES

Sturdy colorfast Heavy Sanitize

†

/Cold Extra High Heavy Extra Rinse High-speed tumbling and a

fabrics and heavily Duty Hot/Cold High Normal Deep Clean* high-speed nal spin help provide

soiled garments Warm/Warm Medium Light Prewash optimal cleaning and reduce drying

Warm/Cold Low Presoak times.

Cool/Cold No Spin EcoBoost

Cold/Cold FanFresh

Delay Start

Normally soiled cottons, Normal/ Hot/Cold Extra High Heavy Extra Rinse This cycle combines medium-speed

linens, sheets, and Casual Warm/Cold High Normal Deep Clean* tumbling, a high-speed spin, and

mixed garment loads Cool/Cold Medium Light Prewash a load cooling process to reduce

Cold/Cold No Spin Presoak wrinkling. This cycle is designed to

FanFresh provide the most energy efciency.

Delay Start

Heavily soiled white Whitest Sanitize

†

/Cold Extra High Heavy Extra Rinse Hot wash temperatures ensure

fabrics Whites Hot/Cold High Normal Deep Clean* liquid chlorine bleach action.

Warm/Warm Medium Light Prewash An Extra Rinse helps remove any

Warm/Cold Low Presoak bleach residue in clothes.

Cool/Cold No Spin EcoBoost

Cold/Cold FanFresh

Delay Start

Blankets, comforters Bulky Sanitize

†

/Cold High Heavy Extra Rinse Uses an initial soak to completely

Items Hot/Cold Medium Normal Deep Clean* saturate the load, followed by

Warm/Warm Low Light Prewash medium wash speeds and a

Warm/Cold Extra Low Presoak medium-speed spin to maintain

Cool/Cold No Spin EcoBoost load balance.

Cold/Cold FanFresh

Delay Start

Lightlysoiledcotton QuickWash Hot/Cold Extra High Heavy Extra Rinse For small loads (3-4 items) needed

or synthetic garments Warm/Cold High Normal FanFresh quickly. This cycle combines

Cool/Cold Medium Light Delay Start high-speed tumbling, a shortened

Cold/Cold Low wash time, and a high-speed spin

Extra Low for reduced drying times.

Sheer fabrics Delicate Warm/Warm Extra High Normal Extra Rinse This cycle combines low-speed

and lingerie Warm/Cold High Light FanFresh tumbling and low-speed spin

Cool/Cold Medium Delay Start for gentle fabric care.

Cold/Cold Low

Extra Low

No Spin

Small loads of items Hand Wash Warm/Warm Extra High Normal Extra Rinse Similar to the way garments are

labeled “handwash”: Warm/Cold High Light FanFresh hand-washed in a sink, this cycle

undergarments, Cool/Cold Medium Delay Start combines periods of low-speed

bras, silks Cold/Cold Low tumbling and soaking. NOTE: Use

Extra Low mesh garment bags as needed.

No Spin

Items to wash: Cycle:

Wash/Rinse

Temperature:

Spin

Speed:

Soil

Level:

Available

Options:

Cycle Details:

Load Size Recommendations

For best results, follow the load size recommendations noted for each cycle. For cycles without a load size

recommendation, follow on-screen instructions or see the Cycle Details.

For additional cycle details and options, refer to the LCD display.

Settings and options shown in bold are default settings for that cycle.

For best performance, not all settings are available with each cycle, and some options cannot be used together.

Small load: Fill the washer drum with 3-4 items, not more than 1/4 full.

Medium load: Fill the washer drum up to about 1/2 full.

Large load: Fill the washer drum up to about 3/4 full.

Extra-large load: Fill the washer drum, but make sure clothes can tumble freely.

For best results, avoid packing tightly.

* Deep Clean with Steam adds steam to assist in removing tough stains.

7

Swimwear, items Rinse/Drain, Warm/Warm Extra High N/A Fan Fresh The default cycle is Rinse, Drain, &

that need rinsing only & Spin Warm/Cold Medium Spin. This cycle adds water, then

High Low uses high-speed tumbling and an

Cool/Cold Extra Low extra high-speed spin. For some

Cold/Cold No Spin fabrics, you may wish to set the

spin speed to a lower setting.

Wet load of clothes Rinse/Drain, N/A Extra High N/A Fan Fresh Select “None” for rinses. Use this

& Spin High cycle to spin excess water out of a

Medium load. This cycle drains the water

Low and spins at an extra-high speed.

Extra Low speed. Spin speed can be set to

No Spin a lower setting.

Custom My Cycle Custom Save your favorite cycle/setting

combinations. See the My Cycle

and Specialty Cycle section of

this guide.

No clothes in washer Clean Washer Make sure no clothes are in washer.

Use monthly with Affresh to clean

the interior of the washer.

Cottons, linens Allergen

††

Sanitize

†

/Cold Extra High Heavy Extra Rinse Uses more water to ush out

exposed to possible Hot/Cold High Normal Deep Clean allergens such as dust mites and pet

allergens. Medium Light Prewash dander from normally-soiled items.

Presoak

FanFresh

Jeans and denims Jeans Warm/Cold Medium Heavy Extra Rinse Cycle combines low-speed

Cool/Cold Low Normal Prewash tumbling and medium-speed spins

Cold/Cold Extra Low Light Presoak to provide gentle care for jeans and

No Spin FanFresh denims.

Blankets/Comforters Specialty Varies by cycle. See the My Cycle and Specialty Specialty Cycles provide custom

Pillows Cycles Cycle section of this guide. cycles for tackling common

Sheets/Linens household cleaning tasks. Refer to

Wool Sweaters the on-screen description for the

Kidswear individual cycles for additional

Sportswear details and available settings.

Intimates

Business Wear

CYCLE GUIDE — SPECIAL-PURPOSE CYCLES

Items to wash: Cycle:

Wash/Rinse

Temperature:

Spin

Speed:

Soil

Level:

Available

Options:

Cycle Details:

†† Allergen

Allergen cycle certied by NSF International, an independent, third party testing and certication organization.

The certication veried that this cycle reduced tested allergens by at least 95.0% and maintained the water

temperature necessary to kill dust mites. Only the allergen cycle has been designed to meet the requirements

of NSF Protocol P351 for Allergen Reduction Performance effectiveness.

† Sanitize

Cycles certied by NSF International, an independent, third party testing and certication organization are those with

the sanitize temperature selection available. The certication veried that these cycles reduce 99.9% of bacteria typically

found on clothing, bedding, and towels. There is no carryover of bacteria between loads after the cycle is complete.

Only cycles with sanitize wash temperature selected have been designed to meet the requirements of NSF Protocol

P172 for Sanitizing Effectiveness.

For additional cycle details and options, refer to the LCD display.

Settings and options shown in bold are default settings for that cycle.

For best performance, not all settings are available with each cycle, and some options cannot be used together.

8

USING YOUR WASHER

Sort items by recommended cycle, water temperature, and

colorfastness. Separate heavily soiled items from lightly soiled.

Separate delicate items from sturdy fabrics. Treat stains

promptly and check for colorfastness by testing stain remover

products on an inside seam.

1. Sort and prepare your laundry

Open the washer door. If desired, add Oxi product or color-safe

bleach to the basket before loading clothes. Place a load of

sorted clothes loosely in the washer. Items need to move freely

for best cleaning and to reduce wrinkling and tangling. Close the

washer door by pushing it rmly until the latch clicks.

n Depending on load type and cycle, the washer can be fully

loaded, but not tightly packed. Washer door should close

easily. See “Cycle Guide” for loading suggestions.

n Mix large and small items and avoid washing single items.

Load evenly.

n Wash small items in mesh garment bags. For multiple items,

use more than one bag and ll bags equally.

2. Load laundry into washer

First wash cycle without laundry

Before washing clothes for the rst time, ll the HE liquid

dispenser cartridge and install in the dispenser drawer. Choose

theQUICKWASHcycleandrunitwithoutclothes.Useonly

HE detergent. This initial cycle serves to ensure the interior is

clean and the dispenser drawer is ready for use before washing

clothes.

Choosing the Right Detergent

Use only High Efciency detergents. The package will be

marked “HE” or “High Efciency.” Low-water washing creates

excessive sudsing with a regular non-HE detergent. Using regular

detergent will likely result in longer cycle times and reduced

rinsing performance. It may also result in component failure and,

over time, build-up of mold or mildew. HE detergents are made

to produce the right amount of suds for the best performance.

Followthemanufacturer’sinstructionstodeterminetheamount

of detergent to use.

Use only High Efciency (HE) detergent.

IMPORTANT:

n Empty pockets. Loose change, buttons, or any small object

can plug pumps and may require a service call.

n Close zippers, fasten hooks, tie strings and sashes, and

remove non-washable trim and ornaments.

n Mend rips and tears to avoid further damage to items

during washing.

n Turn knits inside out to prevent pilling. Separate lint-takers

from lint-givers. Synthetics, knits, and corduroy fabrics will

pick up lint from towels, rugs, and chenille fabrics.

n Do not dry garments if stains remain after washing, because

heat can set stains into fabric.

n Always read and follow fabric care labels and laundry

product instructions. Improper usage may cause damage

to your garments.

9

Using the Precision Dispense Dispenser

3. Add HE detergent to dispenser

Powdered detergent:

Add directly to the

compartment.

Lift out the cartridge and set aside.

Place a measured amount of detergent

in the powdered HE detergent

compartment.

Use only High Efciency

(HE) detergent.

Precision Dispense Ultra cartridge

Powdered HE detergent

single-load compartment

IMPORTANT:

•Donotuseliquiddetergentsinthesingle-load

compartment; liquid detergents may seep out of the

detergent compartment before the main wash begins.

•IfyouareusingtheDelayWashoption,useofthe

dispenser cartridge is recommended, or powdered

detergent may be used in the HE powdered detergent

compartment.

Powdered HE

detergent

compartment

To use the dispenser drawer:

1. Open the dispenser drawer.

2. Add laundry products as described in steps 3–6.

3. Slowly close the dispenser drawer. Make sure it is

completely closed.

NOTE: A small amount of water may remain in the dispensers

from the previous wash cycle. This is normal.

Tab

Use only HE High Efciency

liquid detergents. The dispenser cartridge

will hold about 20 oz. (590 ml) of HE liquid

detergent, or enough for up to 36 loads

†

.

To Fill:

Pull back on the tab and lift the ll

door. Fill to the “MAX” line with

HE liquid detergent. Close ll door.

It will click into place.

To Install the Dispenser Cartridge:

1. Pull out the dispenser drawer.

2. Insert the dispenser cartridge completely in detergent

compartment as shown. It should click into position.

3. Slowly slide the dispenser drawer in until it is completely

closed. The washer will automatically detect the

dispenser cartridge.

4. Adjust the detergent concentration and water hardness

settings, if needed. Default settings are 2x detergent

concentration and normal water hardness. If the

detergent concentration is not listed on the package,

see “About Detergent Concentration” to calculate the

concentration.

To Adjust Dispenser Settings:

1. Press PRECISION DISPENSE.

2. Select the desired settings using the

LCD control buttons.

NOTE:

n

The dispenser cartridge should be rinsed out when

changing detergents or when the washer will not be used

for extended periods. For instructions on cleaning the

dispenser cartridge, see “Washer Maintenance”.

†

The number of loads will vary, depending on detergent concentraon,

load size, cycle used, and soil level. The maximum capacity of up to

36 loads requires use of 6x concentraon detergent.

Use only High

Efciency (HE)

detergent.

10

Add liquid chlorine bleach to the bleach compartment.

Do not overll, dilute, or use more than 2/3 cup (165 mL).

Do not use color-safe bleach or Oxi in the same cycle with

liquid chlorine bleach.

n

Always measure liquid chlorine bleach. Use a measuring cup

with a pour spout; do not guess.

n

Do not ll beyond the “MAX” level. Overlling could cause

garment damage.

n

Do not add color-safe bleach or oxi-product to this dispenser.

Add Oxi product or color-safe bleach to the basket before

loading clothes.

5. Add liquid chlorine bleach

to dispenser (if desired)

7. Press POWER to turn on washer

8. Select CYCLE

Turn cycle knob to choose your wash cycle. The cycle name

and options will appear in the display.

See “Cycle Guide” for details on cycle features, or press More

Info. Not all options and settings are available on all cycles.

When selecting My Cycle or Specialty Cycles, refer to the

LCD display for additional options and settings. For more

information on using My Cycle and Specialty Cycles,

see “My Cycle and Specialty Cycles”.

Pour a measured amount of liquid fabric softener into liquid

fabricsoftenercompartment.Alwaysfollowmanufacturer’s

directions for correct amount of fabric softener based on your

load size.

Fabric softener is always dispensed in the last rinse, even if

Extra Rinse is selected.

IMPORTANT: Do not overll, dilute, or use more than 1/4 cup

(60 mL) of fabric softener. Do not ll past the MAX line.

Overlling dispenser will cause fabric softener to immediately

dispense into washer.

n

Do not spill or drip any fabric softener onto the clothes.

n

Do not use liquid fabric softener dispenser balls in this

washer. They will not dispense correctly.

4. Add fabric softener to dispenser

(if desired)

Slowly close the Precision Dispense drawer. Make sure the

drawer is closed completely, then press POWER to turn on

the washer.

Oxi-type boosters or color-safe bleach can be added to the

drum prior to adding laundry.

6.Add Oxi or color safe bleach (if desired)

Liquid fabric

softener

compartment

Liquid chlorine

bleach

compartment

11

The display will show the default settings for the selected

cycle. If desired, press the button beneath each setting to

adjust the Temperature, Soil Level, and Spin Speed, and to add

options such as an additional Rinse. Use the and arrow

keys to page to additional options.

For more information on a cycle, press MORE INFO.

NOTE: Not all settings are available on all cycles. See “Cycle

Guide” for available settings.

Normal/Casual

59min

Press and hold START/PAUSE to begin cycle.

Warm/Cold

Temperature

Extra High

Spin Speed

Normal

Soil Level

O

Stain Treat

59min

Estimated

Cycle Time

9. Adjust settings, if desired

10. Select any additional options

Press the FanFresh button or EcoBoost button to add these

options to the selected cycle.

If FanFresh is selected, the washer will automatically activate

the vent fan and tumble the load periodically for up to 16 hours.

This is useful if you are unable to remove a load immediately

after the cycle has nished.

The EcoBoost

™

option provides additional energy savings

through reduced hot water usage and maintains cleaning

performance by lengthening the wash time on some cycles.

NOTE: Not all options are available with all cycles.

59min

Estimated

Cycle Time

OK

Normal/Casual

Use the arrows to increase or decrease the delay start time

O

20 hours

Delay Start: 6 hours

59min

Estimated

Cycle Time

11. Setting a delayed start

If you do not want to begin a cycle immediately, you may

choose the DELAY START option. This will delay the start

of the wash cycle by up to 20 hours.

To set a delayed Start:

1. Select the Delay Start option using the LCD control buttons.

Use the buttons to adjust the delay time up or down.

2. Press START/PAUSE to set the delay. The delay countdown

has started when the START/PAUSE light stops blinking.

IMPORTANT: If you are using the Delay Wash option, use of the

dispenser cartridge is recommended, or powdered detergent

may be used in the HE powdered detergent compartment.

12. Press and hold START/PAUSE

to begin wash cycle

Press and hold the START/PAUSE button to start the wash

cycle. To pause a cycle in progress, press the START/PAUSE

button once, then press and hold again to continue the cycle.

To cancel a cycle, press the POWER button.

Once you press and hold START/PAUSE, you will hear the

door lock, unlock, and lock again. The washer door will remain

locked during the wash cycle.

Unlocking the door to add garments:

If you need to open the door to add 1 or 2 missed garments,

you may do so while “Door Locked - To unlock and add a

garment, press START/Pause button” is displayed.

Press START/PAUSE once; the door will unlock

once the washer movement has stopped.

This may take several minutes. Then close

door and press START/PAUSE again to restart

the cycle.

12

MY CYCLE AND SPECIALTY CYCLES

MY CYCLE

You may store up to 7 frequently used custom cycles in My

Cycle for quick access.

To save a custom cycle:

1. Select My Cycle with the Wash Cycle knob.

2. Follow the on-screen prompts.

If you try to add another custom cycle and all 7 custom storage

spaces are lled, you will need to delete a saved custom cycle

before saving the new one.

To retrieve a custom cycle using My Cycle:

1. Select My Cycle with the Wash Cycle knob.

2. Use the and arrow keys to scroll through the saved

custom cycles until the desired cycle is displayed.

3. Press the selector button under the desired cycle.

SPECIALTY CYCLES

Specialty cycles are designed for a specic purpose, such as

washing pillows or comforters. To select a specialty cycle, turn

the Wash Cycle knob to Specialty, then select the desired cycle

from the display screen using the selection buttons.

Specialty Cycles include:

Blankets/Comforters – Cotton Blanket

Blankets/Comforters – Synthetic Blanket

Blankets/Comforters – Comforter

Pillows – Feather

Pillows – Fiberll

Pillows – Decorative

Sheets/Linens – Cotton

Sheets/Linens – Synthetics

Wool Sweaters

Kidswear

Sportswear – Cotton

Sportswear – Performance

Intimates

Business Wear

Specialty Cycles

Blankets/

ComforterPillows Sheets/Linens

Wool Sweaters

13. Remove garments promptly

after cycle is nished

Promptly remove garments after cycle has

completed to avoid odor and rusting of

metal objects on garments. When unloading

garments, pull back the door seal and check

for small items between the tub and the basket.

If you will be unable to remove the

load promptly, use the FanFresh

™

option.

If the FanFresh

™

option is selected, the washer

will automatically activate the fan and tumble

the load periodically for up to 16 hours.

NOTE:

n After any wash cycle is completed,

the door must be opened and then

closed before a new cycle can begin.

n A small amount of water may remain in the dispensers after

the wash cycle is complete. This is normal.

n This washer has a tight seal to avoid water leaks. To avoid

odors, leave the door open to allow the washer to dry

between uses.

13

CLEANING THE PRECISION DISPENSE

ULTRA CARTRIDGE

It is recommended that you rinse out the Precision

Dispense Ultra cartridge when changing detergent types or

concentrations, or when the washer will not be used for

an extended period.

1. Pull dispenser out until it stops.

2. Lift out the Precision Dispense Ultra cartridge.

3. Lift cover on cartridge and ush interior thoroughly with

warm water.

4. Allow to air dry or wipe with a clean, soft towel.

IMPORTANT: Cartridge is not dishwasher safe.

WASHER MAINTENANCE

CLEANING YOUR WASHER

Keep your washer as clean and fresh as your clothes.

To keep washer interior odor-free, follow this recommended

cleaning procedure at least once a month:

1. Make sure laundry drum is empty.

2. Using recommended AFFRESH

®

washer cleaner, add

one tablet to washer basket

OR

If using liquid chlorine bleach, add 1 cup (250 mL) to

liquid chlorine bleach dispenser.

IMPORTANT: Do not add detergent to CLEAN WASHER

cycle. Do not use more than recommended amount of

bleach to avoid damaging product over time.

3. Close washer door.

4. Press POWER.

5. Select CLEAN WASHER with Affresh

™

cycle.

6. Press and hold START/PAUSE.

NOTE: The basket will rotate, then the door will unlock,

lock again, and then the cycle will continue. The washer

will add some water, and the basket will rotate while

the washer runs a short sensing cycle. This will take

approximately 3 minutes.

7. The cycle will determine whether clothing or other items

are in the washer. If no items are detected in the washer,

it will proceed to Step 8.

If any items are detected in the washer, a reminder will

be displayed on the screen and the door will unlock.

Open and remove any garments in the wash drum.

Press POWER to cancel the error message. Then repeat

steps 3–6 to start the cycle again.

8. Once the cycle has started, allow it to nish. If START/

PAUSE or POWER is pressed before the cycle is

complete, it may take up to 10 minutes for the door

to unlock.

9. After the cycle has ended, leave the door open slightly,

to allow for better ventilation and drying of washer

interior.

To clean exterior:

1. Use a soft, damp cloth or sponge to wipe up any spills.

2. Use mild soap and water if needed.

IMPORTANT: To avoid damaging washer nish, do not use

abrasive products.

14

CLEANING THE DISPENSER

You may nd laundry product residue leftover in your

dispenser compartments. To remove residue, follow this

recommended cleaning procedure:

1. Pull dispenser drawer out until it stops.

2. Press down on the release tab and pull straight out to

remove the dispenser.

3. Lift off cover panel by

pulling straight up.

4. Wash dispenser and

cover panel in warm,

soapy water, using a mild

detergent.

5. Rinse with warm water.

6. Air dry or wipe with a

clean towel, slide cover

panel back onto posts on

dispenser.

7. Align edges of dispenser

with guides in washer,

then slide dispenser

back into slot.

IMPORTANT: Dispenser is

not dishwasher safe.

WASHER MAINTENANCE

CLEANING THE DOOR SEAL

1. Open the washer door and remove any clothing or items

from the washer.

2. Inspect the gray colored seal between the door opening

and the basket for stained areas. Pull back the seal to

inspect all areas under the seal and to check for foreign

objects.

3. If stained areas are found, wipe down these areas of the

seal, using the procedure that follows.

a) Mix a dilute solution, using 3/4 cup (177 mL) of liquid

chlorine bleach, and 1 gal. (3.8 L) of warm tap water.

b) Wipe the seal area with the dilute solution, using

a damp cloth.

c) Let stand 5 minutes.

d) Wipe down area thoroughly with a dry cloth and let the

washer interior air dry with door open.

IMPORTANT:

Wear rubber gloves when cleaning for prolonged periods.

n

Refertothebleachmanufacturer’sinstructionsfor

proper use.

Seal

15

Operate your washer only when you are home. If moving,

or not using your washer for a period of time, follow these

steps:

1.



Unplug or disconnect power to washer.

2.



Turn off water supply to washer to avoid ooding due

to water pressure surges.

WINTER STORAGE CARE

IMPORTANT: To avoid damage, install and store washer

where it will not freeze. Because some water may stay in

hoses, freezing can damage washer. If storing or moving

during freezing weather, winterize your washer.

To winterize washer:

1.



Shut off both water faucets, disconnect and drain water

inlet hoses.

2.



Put 1 qt. (1 L) of R.V.-type antifreeze in basket and run

washer on RINSE AND SPIN cycle for about 30 seconds

to mix antifreeze and remaining water.

3.



Unplug washer or disconnect power.

IMPORTANT: To reduce risk of hose failure, replace inlet

hoses every ve years and periodically inspect for kinks,

cuts, wear or water leaks.

HELPFUL TIP: When replacing your inlet hoses, mark

replacement date on label with a permanent marker.

NON-USE AND VACATION CARE

REINSTALLING/USING WASHER AGAIN

To reinstall washer after non-use, vacation, winter storage,

or moving:

1.



Refer to Installation Instructions to locate, level, and

connect washer.

2.



Before using again, run washer through the following

recommended procedure:

To use washer again:

1.



Flush water pipes and hoses. Reconnect water inlet

hoses. Turn on both water faucets.

TRANSPORTING YOUR WASHER

1.



Shut off both water faucets. Disconnect and drain water

inlet hoses.

2.



If washer will be moved during freezing weather, follow

WINTER STORAGE CARE directions before moving.

3.



Disconnect drain hose from drain system and from back

of washer.

4.



Unplug power cord.

5.



Place inlet hoses and drain hose inside washer basket.

6.



Bundle power cord with a rubber band or cable tie to

keep it from hanging onto the ground.

IMPORTANT: Call for service to install new transport bolts.

Do not reuse transport bolts. Washer must be transported

in the upright position. To avoid structural damage to

your washer, it must be properly set up for relocation by a

certied technician.

2.



Plug in washer or reconnect power.

3.



Run washer through BULKY ITEMS cycle to clean

washer and remove antifreeze, if used. Use only HE

detergent.Usehalfthemanufacturer’srecommended

amount for a medium-size load.

16

Today’sliquidHEdetergentsareconcentrated.Mostbrandsof

concentrated HE detergent will show the level of concentration

on the bottle. If so, simply set the concentration level in the

Precision Dispense menu to match the level shown on the bottle.

However, if the detergent bottle does not give the concentration,

it can be easily calculated. Just divide the package size in uid

ounces by the number of loads. Then refer to the chart below to

nd the concentration.

If you do not get your desired cleaning results, try using a lower

concentration number. If you have excess suds, try using a higher

concentration number.

ABOUT DETERGENT CONCENTRATION

Concentration Number of ounces ÷ number of loads

1X >2.5

2X 1.5 - 2.49

3X 0.9 - 1.49

4X 0.7 - 0.89

5X 0.5 - 0.69

6X 0.3 - 0.49

17

First try the solutions suggested here or visit our website at www.whirlpool.com/help

for assistance and to possibly avoid a service call.

If you experience

Possible Causes

Solution

Door not closed completely.

Make sure the washer door is closed completely.

Press and hold the START/PAUSE button 2-5 seconds.

Household fuse is blown or circuit

breaker has tripped.

Check that the household fuse is intact and tight, or that the

circuit breaker has not tripped. Replace the fuse or reset the

circuit breaker. If the problem continues, call an electrician.

TROUBLESHOOTING

Washer will not run

START/PAUSE button not pressed

rmly or held long enough.

Washer Operation

Incorrect power supply.

This washer requires a 120-volt power supply.

Check with a qualied electrician.

Wrong type of fuse.

Use a time-delay fuse.

Fill hoses not attached tightly.

Tighten ll-hose connections.

Make sure all 4 ll hose washers are installed correctly.

Drain hose connection not correct.

Properly secure drain hose to drainpipe or laundry tub. Refer to

the Installation Instructions for additional information.

Check household plumbing for leaks

or clogged sink or drain.

Water can backup out of a clogged sink or drainpipe. Check all

household plumbing for leaks (laundry tubs, drain pipe, water

pipes, and faucets.)

Fill hose washers missing.

Water Leaks

Water leaks

Do not place tape over drain opening.

Other performance

or operation issues

Refer to the built-in TROUBLE-

SHOOTING feature on the washer.

See the instructions above to access the built-in

TROUBLESHOOTING menus using the MORE INFO button.

Other Issues

Clean the door seal. See “Washer Maintenance.”

Door seal is dirty.

Use only HE High Efciency detergents and follow

themanufacturer’srecommendations.

Not using HE detergent or using too

much HE detergent.

Remove and clean the dispenser. See “Washer Maintenance.”

Dispenser is clogged.

Normal/Casual

59min

Press and hold START/PAUSE to begin cycle.

Warm/Cold

Temperature

Extra High

Spin Speed

Normal

Soil Level

O

Stain Treat

Est. Cycle Time

1. Press MORE INFO

With the washer on, press MORE INFO to access the built-in

TROUBLESHOOTING feature.

USING THE BUILT-IN TROUBLESHOOTING FEATURE

2. Select TROUBLESHOOTING

Use the LCD control buttons to select TROUBLESHOOTING.

Then use the LCD control buttons to select the

TROUBLESHOOTING topic. The and buttons

can be used to advance through the different options.

18

WHIRLPOOL CORPORATION LAUNDRY WARRANTY

LIMITED WARRANTY

For one year from the date of purchase, when this major appliance is operated and maintained according to instructions attached to or

furnished with the product, Whirlpool Corporation or Whirlpool Canada LP (hereafter “Whirlpool”) will pay for Factory Specied Parts

and repair labor to correct defects in materials or workmanship that existed when this major appliance was purchased. Service must be

provided by a Whirlpool designated service company. YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY

SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN. This limited warranty is valid only in the United States or Canada and applies

only when the major appliance is used in the country in which it was purchased. Proof of original purchase date is required to obtain

service under this limited warranty.

ITEMS EXCLUDED FROM WARRANTY

This limited warranty does not cover:

1. Replacement parts or repair labor if this major appliance is used for other than normal, single-family household use or when it is

used in a manner that is inconsistent to published user or operator instructions and/or installation instructions.

2. Service calls to correct the installation of your major appliance, to instruct you on how to use your major appliance, to replace or

repair house fuses, or to correct house wiring or plumbing.

3. Service calls to repair or replace appliance light bulbs, air lters or water lters. Consumable parts are excluded from warranty

coverage.

4. Damage resulting from accident, alteration, misuse, abuse, re, ood, acts of God, improper installation, installation not in

accordance with electrical or plumbing codes, or use of products not approved by Whirlpool.

5. Cosmetic damage, including scratches, dents, chips or other damage to the nish of your major appliance, unless such damage

results from defects in materials or workmanship and is reported to Whirlpool within 30 days from the date of purchase.

6. Pick up and delivery. This major appliance is intended to be repaired in your home.

7. Repairs to parts or systems resulting from unauthorized modications made to the appliance.

8. Expenses for travel and transportation for product service if your major appliance is located in a remote area where service by an

authorized Whirlpool servicer is not available.

9. The removal and reinstallation of your major appliance if it is installed in an inaccessible location or is not installed in accordance

with Whirlpool’s published installation instructions.

10. Replacement parts or repair labor on major appliances with original model/serial numbers that have been removed, altered, or

cannot be easily determined.

DISCLAIMER OF IMPLIED WARRANTIES

IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS FOR

A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW. Some states and provinces

do not allow limitations on the duration of implied warranties of merchantability or tness, so this limitation may not apply to you. This

warranty gives you specic legal rights, and you also may have other rights that vary from state to state or province to province.

LIMITATION OF REMEDIES; EXCLUSION OF INCIDENTAL AND CONSEQUENTIAL DAMAGES

YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR AS PROVIDED HEREIN.

WHIRLPOOL SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states and provinces do not allow

the exclusion or limitation of incidental or consequential damages, so these limitations and exclusions may not apply to you. This

warranty gives you specic legal rights, and you also may have other rights that vary from state to state or province to province.

If outside the 50 United States and Canada, contact your authorized Whirlpool dealer to determine if another warranty applies.

If you think you need repair service, rst see the “Troubleshooting” section of the Use & Care Guide. If you are unable to resolve the

problem after checking “Troubleshooting,” additional help can be found by checking the “Assistance or Service” section or by calling

Whirlpool. In the U.S.A., call

. In Canada, call 80/7.

Keep this book and your sales slip together for future

reference. You must provide proof of purchase or installation

date for in-warranty service.

Write down the following information about your major appliance

to better help you obtain assistance or service if you ever need it.

You will need to know your complete model number and serial

number. You can nd this information on the model and serial

number label located on the product.

Dealer name____________________________________________________

Address ________________________________________________________

Phone number__________________________________________________

Model number __________________________________________________

Serial number __________________________________________________

Purchase date __________________________________________________

Page is loading ...

22

GUIDE DE PROGRAMMES - PROGRAMMES STANDARD

Tissus robustes aux Heavy Sanitize

†

/Cold Extra High Heavy Extra Rinse Un culbutage et un essorage nal à

couleurs grand teint Duty Hot/Cold High Normal Deep Clean* haute vitesse aident à fournir une

et vêtements, (service Warm/Warm Medium Light Prewash operformance de nettoyage

serviettes,oujeans intense) Warm/Cold Low  Presoak optimaleetàréduireletemps

trèssales  Cool/Cold NoSpin  EcoBoost deséchage.

Cold/Cold FanFresh

Delay Start

Normally soiled cottons, Normal/ Hot/Cold Extra High Heavy Extra Rinse Ce programme combine un

linens, sheets, and Casual Warm/Cold High Normal Deep Clean* culbutage à vitesse moyenne et un

mixed garment loads (normal/ Cool/Cold Medium Light Prewash essorage à haute vitesse. Ce

tout-aller) Cold/Cold No Spin Presoak programme est conçu pour fournir

     FanFresh lameilleureefcacitééconergétique.

Delay Start

Tissusblancstrèssales Whitest Sanitize

†

/Cold Extra High Heavy Extra Rinse Destempératuresdelavageélevées

Whites Hot/Cold High Normal DeepClean* garantissentl’efcacitédel’agent

(blancs les Warm/Warm Medium Light Prewash de blanchiment au chlore liquide.

 plusblancs) Warm/Cold Low  Presoak Unrinçagesupplémentaireaideà

  Cool/Cold NoSpin  EcoBoost àéliminertoutrésidud’agentde

Cold/Cold FanFresh blanchiment dans les vêtements.

Delay Start

Couvertures, couettes Bulky Sanitize

†

/Cold High Heavy Extra Rinse Utilise un trempage initial pour bien

Items Hot/Cold Medium Normal Deep Clean* imbiber la charge, suivi de vitesses

 (articles Warm/Warm Low Light Prewash delavagemoyennesetd’un

volumineux) Warm/Cold ExtraLow  Presoak essorageàvitessemodéréepour

  Cool/Cold NoSpin  EcoBoost maintenirl’équilibredelacharge.

Cold/Cold FanFresh

Delay Start

Petiteschargesde QuickWash Hot/Cold Extra High Heavy Extra Rinse Pour les petites charges (de 3 à 4

vêtementslégèrement (lavagerapide) Warm/Cold High Normal FanFresh articles) dont on a besoin rapide-

sales Cool/Cold Medium Light Delay Start ment. Ce programme combine

Cold/Cold Low   unculbutageàvitesseélevée

   ExtraLow   pourréduireletempsdeséchage.

Tissus transparents Delicate Warm/Warm Extra High Normal Extra Rinse Ce programme combine un

et lingerie (articles Warm/Cold High Light FanFresh culbutage et un essorage à basse

 délicats) Cool/Cold Medium Delay Start vitessepourassurerunsoindélicat

Cold/Cold Low   destissusetréduirelefroissement.

Extra Low

No Spin

Petites charges Hand Wash Warm/Warm Extra High Normal Extra Rinse Semblable à la façon dont les

d’articlesportantla (lavageà Warm/Cold High Light FanFresh vêtementssontlavésàlamaindans

mention “Lavage à la la main) Cool/Cold Medium Delay Start unévier,ceprogrammecombine

main” : sous-vêtements, Cold/Cold Low   despériodesdeculbutageàbasse

soies lavables Extra Low vitesse et de trempage.

No Spin REMARQUE : Utiliser des sacs en

let pour le linge selon le besoin.

Articles à laver :

Programme :

Température

de lavage/

rincage :

Vitesse

d’essorage :

Niveau

de

saleté :

Options

disponibles :

Détails du programme :

Pourdesrenseignementssurlesprogrammesetdesoptionssupplémentaires,voirl’afchageACL.

Lesréglagesetoptionsindiquésengrassontlesréglagespardéfautpourceprogramme.

Pouruneperformanceidéale,touslesréglagesnesontpasdisponiblessurtouslesprogrammesetcertainesoptions

nepeuventpasêtrecombinées.

Options de Température

de lavage/rinçage :

Assainissement/Cold

(Sanitize/Froide)

Chaude/Froide (Hot/Cold)

Tiède

/Tiede (Warm/Warm)

Tiède/

Froide (Warm/Cold)

Frai

che/

Froide (Cool/Cold)

Froide

/

Froide (Cold/Cold)

Options de

Vitesse d’essorage :

Trèsélevée(VeryHigh)

Élevée

(High)

Basse

(Low)

Pasd’essorage

(No Spin)

Options de

Niveau de saleté :

Élevé

(Heavy)

Normal

(Normal)

Léger

(Light)

Options disponibles :

Rinçagesupplémentaire

(Extra Rinse)

Nettoyage en profondeur

/Nettoyage en

profundeur avec vapeur (Deep Clean/Deep

Clean with Steam)

Prewash(Pré-lavage)

Pré-trempage(Presoak)

Puissanceéco

(EcoBoost)

FanFresh

Miseenmarchedifféré(DelayStart)

Page is loading ...

W10254421A

W10254422A - SP

ASSISTANCE OR SERVICE

Before calling for assistance or service, please check “Troubleshooting” or visit www.whirlpool.com/help.

It may save you the cost of a service call. If you still need help, follow the instructions below.

When calling, please know the purchase date and the complete model and serial number of your appliance.

This information will help us to better respond to your request.

Whirlpool Corporation

Customer eXperience Center

553 Benson Road

Benton Harbor, MI 49022-2692

Customer eXperience Centre

Whirlpool Canada LP

Unit 200 - 6750 Century Ave.

Mississauga, ON L5N 0B7

You can write with any questions or concerns at:

Whirlpool Corporation Customer eXperience Center

1-800-253-1301 www.whirlpool.com

1-800-442-9991 (Accessories)

www.whirlpool.com/accessories

Whirlpool Canada LP

Customer eXperience Centre

1-800-807-6777

www.whirlpool.ca

Our consultants provide assistance with

Please include a daytime phone number in your correspondence.

If you need replacement parts or to order accessories

We recommend that you use only FSP

®

Factory Specied Parts.

These parts will t right and work right because they are made with the same precision

used to build every new WHIRLPOOL

®

appliance.

To locate FSP

®

replacement parts, assistance in your area, or accessories:

or call your nearest designated service center or refer to your Yellow Pages telephone directory.

In the U.S.A.

Features and specications on our full line of appliances.

N

Installation information.N

Specialized customer assistance (Spanish speaking, N

hearing impaired, limited vision, etc.).

In the U.S.A. and Canada

Use and maintenance procedures.

N

Accessory and repair parts sales.N

Referrals to local dealers, repair parts distributors, N

and service companies. Whirlpool designated service

technicians are trained to fulll the product warranty

and provide after-warranty service, anywhere in the

United States and Canada.

ASSISTANCE OU SERVICE

Avant de faire un appel pour assistance ou service, veuillez vérier la section “Dépannage” ou consulter

www.whirlpool.com/help. Cette vérication peut vous faire économiser le coût d’une visite de réparation.

Si vous avez encore besoin d’aide, suivre les instructions ci-dessous.

Lors d’un appel, veuillez connaître la date d’achat et les numéros au complet de modèle et de série de votre appareil.

Ces renseignements nous aideront à mieux répondre à votre demande.

Si vous avez besoin de pièces de rechange ou pour commander des accessoires

Si vous avez besoin de commander des pièces de rechange, nous vous recommandons d’utiliser seulement des pièces

spéciées par l’usine FSP

®

. Ces pièces conviendront et fonctionneront bien parce qu’elles sont fabriquées selon les mêmes

spécications précises utilisées pour construire chaque nouvel appareil WHIRLPOOL

®

.

Pour trouver des pièces de rechange FSP

®

ou des accessoires dans votre région :

Whirlpool Canada LP Centre pour l’eXpérience de la clientèle

1-800-807-6777 www.whirlpool.ca

Pour plus d’assistance

Vous pouvez nous soumettre toute question ou problème en

écrivant à l’adresse ci-dessous :

Centre pour l’eXpérience de la clientèle

Whirlpool Canada LP

Unit 200 - 6750 Century Ave.

Mississauga, ON L5N 0B7

Dans votre correspondance, veuillez indiquer un numéro

de téléphone où on peut vous joindre dans la journée.

Nos consultants fournissent

l’assistance pour :

Procédés d’utilisation et d’entretien.N

Vente d’accessoires et de pièces de rechange.N

Les références aux concessionnaires, compagnies N

de service de réparation et distributeurs de pièces de

rechange locaux. Les techniciens de service désignés

par Whirlpool

®

sont formés pour remplir la garantie des

produits et fournir un service après la garantie, partout au

Canada.

® Registered Trademark/TM Trademark of Whirlpool, U.S.A.,

Whirlpool Canada LP licensee in Canada

®Marquedéposée/TMMarquedecommercedeWhirlpool,U.S.A.,

Emploi sous licence per Whirlpool Canada LP au Canada

Bauknecht WFW97HEXL Owner's manual

This manual is also suitable for

Bauknecht WFW97HEXL Owner's manual

in other languages

Related papers

Other documents