3
SettingUptheMotion-control
Levers
NoPartsRequired
Procedure
1.Locatethemotion-controlleversattached,butfolded
downonthemachine.
2.Removetheupperbolt(3/8x1inch)andwasher;
loosenthelowerbolt(3/8x1inch).
3.Raisethemotioncontrolleverstotheuprightposition.
4.Aligntheholesinthemotion-controlleverwiththe
holesinthecontrol-armshaft,andinstallthebolt
andwasherremovedpreviously.Repeatthisforboth
controlslevers.
Note:Handtightenallfasteners.
5.Movethemotion-controlleverstotheparkposition,
raisetheseat,andmovethecontrolleversbacktothe
centerposition(neutral).
6.Verifythatthemotion-controlleversareproperly
aligned.
Note:Adjustasnecessary.Tightenallfasteners.
4
ConnectingtheSeat-holdBar
NoPartsRequired
Procedure
Note:UseFigure4andFigure5todeterminewhich
seat-holdbarisonyourmachine.Followtheappropriate
instructions.
1.IfyourseatlatchisasshowninFigure4,locatethe
seat-holdbarontheframeofthemachine.
2.Removethefasteners.
3.Installtheseat-holdbartotheseatframe.
4.Securethebarwiththewasherandcotterpinremoved
previously(Figure4).
Figure4
1.Cotterpin4.Seatholdbar
2.Washer
5.Holeforpin,seatholdbar
3.Seat
5.Ifyourseat-holdbarisasshowninFigure5,ensure
theseatlatchisabovetheweldedtabthersttimeitis
putintotheuserposition.
Note:Ensuretheseatlatchworksandpreventsthe
seatfromrotatingfullyforward.
Figure5
1.Seatlatch
2.Weldedtab
3
