Chauvet Q-Wash Reference guide

Chauvet
Brand
Chauvet
Model
Q-Wash
Category
Floodlights
Type
Reference guide

This manual is also suitable for

Quick Reference Guide
Q-Wash 360Z-LED QRG
Page 2 of 8
About this
Guide
The Q-Wash 360Z-LED Quick Reference Guide (QRG)
only contains the
product
’s connection and mounting information as well as the menu options
and the DMX values.
Disclaimer
• This Quick Reference Guide DOES NOT replace the product’s user
manual, which you can download from the CHAUVET® Web site
(www.chauvetlighting.com).
• You must read ALL the disclaimers and safety notes in this document
as well as those in the product’s user manual before installing,
operating, or maintaining this product.
Safety Notes
• DO NOT open this fixture unless instructed. It contains no user
serviceable parts.
• DO NOT look at the light source when this fixture is on.
•
DO NOT touch the fixture when it is operating because it may be hot.
•
DO NOT cover the ventilation slots when the fixture is operating to
avoid internal overheating.
•
DO NOT install or operate this fixture where there is less than 50 cm to
the nearest surface to allow adequate ventilation around it.
•
DO NOT leave any flammable material within 50 cm from this fixture
while operating or connected to the power outlet to minimize the risk of
fire.
•
DO NOT carry this fixture from the head; use the handles instead.
•
DO NOT mount this fixture overhead without using a safety cable.
•
DO NOT operate this fixture outdoors or in any location where dust,
excessive heat, water, or humidity may affect it.
•
DO NOT operate this fixture if you see damage on the housing, lenses,
or cables. In any of these cases, have the damaged parts replaced by an
authorized technician at once.
•
DO NOT connect this fixture to a dimmer or rheostat.
•
ONLY connect this fixture to a grounded and protected circuit.
What is
Included
• One Q-Wash 360Z-LED
• One IEC power cord with Edison plug (US market)
• One safety cable
• Two omega brackets
• Warranty Card
• Quick Reference Guide
Q-Wash 360Z-LED QRG
Page 3 of 8
Features
• 11 or 15-channel RGBW LED moving yoke wash fixture
• Pan: 540°
• Tilt: 270°
• RGBW color static mixing with or without DMX control
• Vector speed channel for RGBW color mixing
• Variable zoom
• Variable electronic strobe
• Continuously variable electronic dimmer (0~100%)
• Built-in automated programs
• Remote fixture reset and vector speed channel
• 255-step fully customizable program
• Recall auto or custom programs via control panel or DMX
• Color temperature presets (3,200~10,000 K)
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Fuse
Replacement
1) Disconnect the unit from the power outlet.
2) With a flat head screwdriver, wedge the fuse holder out of its housing
and remove the blown fuse from its holder.
3) Replace the blown fuse with a fuse of the exact same type and rating.
4) Insert the fuse holder back in its place, and reconnect power.
Mounting
Before mounting this product, read the safety notes at the beginning of this
guide and on page 2 of the product’s user manual. Then, follow the
mounting procedure indicated in the Setup chapter of the user manual.
Product
Mounting
Diagram
Floor Mounting
C Clamps (not included)
Safety cable (included)
Omega brackets (included)
Q-Wash 360Z-LED QRG
Page 4 of 8
Menu Options
1
st
Level
2
nd
Level
3
rd
Level
Description
INTRO
ADDRESS
001~512
Selects a starting DMX address
RESET
NO/YES
Resets the fixture’s custom settings
FAN
HIGH
Select the fan’s operation mode.
NOTE: Fixture’s controller will force the fan to High if the
fixture’s internal temperature becomes too high, despite any
manual or DMX setting
NORMAL
LOW
AUTO
RUN
DMX512
Selects DMX running mode
AUTO 1
Selects the first automatic program
AUTO 2
Selects the second automatic program
CUSTOM
Selects the user customizable program
SLAVE
Selects the Slave running mode
TEST
Starts the fixture’s test sequence
CHANNELS
BASIC
Selects the 11-channel DMX mode
ADVANCED
Selects the 15-channel DMX mode
DISPLAY
60 CLOSE
Turns off the display after 60 seconds
BRIGHT
Keeps the display on
KEYLOCK
NO/YES
Activates/deactivates the control panel password
DIMMER
DIMMER 4~1
Slow (DIM 4) to fast (DIM1) dimmer curves
DIMMER 0
Linear dimmer
INFO
EDITION
Shows the version of the installed S/W
INVERT
Pan
NORMAL/
REVERSE
Defines the pan direction
Tilt
Defines the tilt direction
Dimmer
Defines the direction of the dimmer fader
Use
NO/YES
Activates the changes
RANGE
P/Start
000~255
Sets the pan start point (restricted range)
P/Finish
Sets the pan end point (restricted range)
T/Start
Sets the tilt start point (restricted range)
T/Finish
Sets the tilt end point (restricted range)
Use
Activates the changes
SPECIAL
Black delay
NO/YES
Activates the move-in black delay (3 s)
Reset
DMX
The DMX controller can reset the fixture
SYSTEM
The control panel can reset the fixture
Power
NORMAL/
HIGH
LEDs illuminate at normal or high intensity
NOTE: Fixture will return to Normal if temperature becomes too
high
Color
UC
White output matches that of older fixtures
RGBTOW
White output set by RGB-W
OFF
White output defined by RGBW faders
Fan
DMX
The DMX controller can set the fan speed
SYSTEM
The control panel can reset the fan speed
EDIT
STEP
000~255
Selects the program step
PAN
Selects the pan position
TILT
Selects the tilt position
SPEED
Selects the pan/tilt speed
RED
Combines red, green, blue, and white to obtain a custom color
GREEN
BLUE
WHITE
Continues in the next page
Q-Wash 360Z-LED QRG
Page 5 of 8
Continued from previous page
1st Level
2nd Level
3rd Level
Description
EDIT (Cont.)
DIMMER
000~255
Selects the dimmer value
STROBE
Selects the strobe frequency and mode
ZOOM
Select the zoom position
DIMSPEED
Selects the dimmer speed
TIME
Selects the step duration
USE
No/Yes
Activates the changes
EXTRA
PASSWORD
****
Opens the Extra menu (see below)
Extra Menu
1
st
Level
2nd Level
3rd Level
4
th
Level
Description
Calib
3200 K
Red
000~255
Sets color temperature for Macro > White 1
Green
Blue
3400 K
Red
000~255
Sets color temperature for Macro > White 2
Green
Blue
4200 K
Red
000~255
Sets color temperature for Macro > White 3
Green
Blue
4900 K
Red
000~255
Sets color temperature for Macro > White 4
Green
Blue
5600 K
Red
000~255
Sets color temperature for Macro > White 5
Green
Blue
5900 K
Red
000~255
Sets color temperature for Macro > White 6
Green
Blue
6500 K
Red
000~255
Sets color temperature for Macro > White 7
Green
Blue
7200 K
Red
000~255
Sets color temperature for Macro > White 8
Green
Blue
8000 K
Red
000~255
Sets color temperature for Macro > White 9
Green
Blue
8500 K
Red
000~255
Sets color temperature for Macro > White 10
Green
Blue
10000 K
Red
000~255
Sets color temperature for Macro > White 11
Green
Blue
RGB-W
Red
000~255
Sets color temperature for Special > Color > RGBtoW
Green
Blue
Default
Default
No/Yes
N/A
Defaults the fixture to factory settings
Q-Wash 360Z-LED QRG
Page 6 of 8
DMX Values
BASIC
Channel
Function
Value
Percent/Setting
1
Pan
000 ó 255
0~540º
2
Tilt
000 ó 255
0~270º
3
Red
000 ó 255
0~100%
4
Green
000 ó 255
0~100%
5
Blue
000
ó
255
0~100%
6
White
000 ó 255
0~100%
7
Power and Color
Macro
000 ó 005
006 ó 010
011 ó 030
031 ó 050
051 ó 070
071 ó 090
091 ó 110
111 ó 130
131 ó 150
151 ó 170
171 ó 200
201 ó 205
206 ó 210
211 ó 215
216 ó 220
221 ó 225
226 ó 230
231 ó 235
236 ó 240
241 ó 245
246 ó 250
251 ó 255
No function
High power
R: 100% G: Up B: 0%
R: Down G: 100% B: 0%
R: 0% G: 100% B: Up
R: 0% G: Down B: 100%
R: Up G: 0% B: 100%
R: 100% G: 0% B: Down
R: 100% G: Up B: Up
R: Down G: Down B: 100%
R: 100% G: 100% B: 100% W: 100%
White 1: 3200 K
White 2: 3400 K
White 3: 4200 K
White 4: 4900 K
White 5: 5600 K
White 6: 5900 K
White 7: 6500 K
White 8: 7200 K
White 9: 8000 K
White 10: 8500 K
White 11: 10,000 K
8
Dimmer
000 ó 255
0~100%
9 Strobe
000 ó 009
010 ó 255
No function
01~20 Hz
10
Zoom
000 ó 255
8~29º
11 Control
000 ó 019
020 ó 039
040 ó 059
060 ó 079
080 ó 099
100 ó 119
120 ó 139
140 ó 149
150 ó 159
160 ó 169
170 ó 179
180 ó 199
200 ó 219
220 ó 255
No function
Pan/tilt black activation
Pan/tilt black deactivation
Automatic fan speed
Slow fan speed
Normal fan speed
High fan speed
Auto program 1 (3 s activation delay)
Auto program 2 (3 s activation delay)
Test (3 s activation delay)
Custom program (3 s activation delay)
No function
Reset (3 s activation delay)
No function
Q-Wash 360Z-LED QRG
Page 7 of 8
ADVANCED
Channel
Function
Value
Percent/Setting
1
Pan
000 ó 255
0~540º
2
Pan Fine
000 ó 255
Fine movement control
3
Tilt
000
ó
255
0~270º
4
Tilt Fine
000 ó 255
Fine movement control
5
Pan/Tilt Speed
000 ó 255
Fast~Slow
6
Red
000 ó 255
0~100%
7
Green
000 ó 255
0~100%
8
Blue
000 ó 255
0~100%
9
White
000 ó 255
0~100%
10
Power and Color
Macro
000 ó 005
006 ó 010
011 ó 030
031 ó 050
051 ó 070
071 ó 090
091 ó 110
111 ó 130
131 ó 150
151 ó 170
171 ó 200
201 ó 205
206 ó 210
211 ó 215
216 ó 220
221 ó 225
226 ó 230
231 ó 235
236 ó 240
241 ó 245
246 ó 250
251 ó 255
No function
High power
R: 100% G: Up B: 0%
R: Down G: 100% B: 0%
R: 0% G: 100% B: Up
R: 0% G: Down B: 100%
R: Up G: 0% B: 100%
R: 100% G: 0% B: Down
R: 100% G: Up B: Up
R: Down G: Down B: 100%
R: 100% G: 100% B: 100% W: 100%
White 1: 3200 K
White 2: 3400 K
White 3: 4200 K
White 4: 4900 K
White 5: 5600 K
White 6: 5900 K
White 7: 6500 K
White 8: 7200 K
White 9: 8000 K
White 10: 8500 K
White 11: 10,000 K
11
Dimmer
000 ó 255
0~100%
12 Strobe
000 ó 009
010 ó 255
No function
01~20 Hz
13
Zoom
000 ó 255
8~29º
14 Dimmer Speed
000 ó 009
010 ó 029
030 ó 069
070 ó 128
130 ó 189
190 ó 255
Set dimmer speed from control panel
Linear dimmer
Non-linear dimmer (fastest)
Non-linear dimmer
Non-linear dimmer
Non-linear dimmer (slowest)
15 Control
000 ó 019
020 ó 039
040 ó 059
060 ó 079
080 ó 099
100 ó 119
120 ó 139
140 ó 149
150 ó 159
160 ó 169
170 ó 179
180 ó 199
200 ó 219
220 ó 255
No function
Pan/tilt black activation
Pan/tilt black deactivation
Automatic fan speed
Slow fan speed
Normal fan speed
High fan speed
Auto program 1 (3 s activation delay)
Auto program 2 (3 s activation delay)
Test (3 s activation delay)
Custom program (3 s activation delay)
No function
Reset (3 s activation delay)
No function
Q-Wash 360Z-LED QRG
Page 8 of 8
Control Panel
Description
Button Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu list and increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list and decreases
the numeric value when in a function
Programming
For details on how to program this product, please refer to the product’s
user manual.
Password
After being prompted to enter the password, press:
<UP>, <DOWN>, <UP>, <DOWN>, and <ENTER>
Contact Us
World Headquarters
General Information CHAUVET®
5200 NW 108
th
Avenue
Sunrise, FL 33351
Voice: (954) 929-1115
Fax: (954) 929-5560
Toll free: (800) 762-1084
Technical Support Voice: (954) 929-1115 (Press 4)
Fax: (954) 756-8015
World Wide Web www.chauvetlighting.com
Q-Wash 360Z-LED QRG – Rev. 01c
© Copyright 2010 CHAUVET®
All rights reserved
Printed in the P. R. C.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Chauvet Q-Wash Reference guide

Chauvet
Brand
Chauvet
Model
Q-Wash
Category
Floodlights
Type
Reference guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents