Sytech SY1663VR Owner's manual

Sytech
Brand
Sytech
Model
SY1663VR
Category
Radios
Type
Owner's manual

Sytech SY1663VR is a portable AM/FM radio that offers a range of features for a great listening experience. Enjoy your favorite stations with the built-in speaker or connect headphones for private listening. The telescopic antenna enhances FM reception, and the rotary tuning knob allows for precise station selection.

Sytech SY1663VR is a portable AM/FM radio that offers a range of features for a great listening experience. Enjoy your favorite stations with the built-in speaker or connect headphones for private listening. The telescopic antenna enhances FM reception, and the rotary tuning knob allows for precise station selection.

Congratulations on the purchase of your new AM/FM Radio SY-1663. In order to fully benefit
from this product please read the following instructions carefully. Store this user manual in a safe
place for future references.
1. TELESCOPIC ANTENNA
2. RADIO TUNING KNOB CONTROL
3. VOLUME CONTROL KNOB
4. POWER OFF/ BAND SELECTOR
5. HEADPHONE JACK
6. ANALOGUE DISPLAY
7. BATTERY COMPARTMENT COVER (back cabinet)
WELCOME
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
DC Battery Supply
Open the battery compartment and insert as indicated in the compartment two batteries, type
LR6, UM3 or AA cells.
Radio
1. Select the wave band using RADIO BAND SELECTOR.
2. Adjust the sound with the controls VOLUME.
3. You may connect stereo headphones with a 3.5mm jack. Plug in the earphone jack to the
socket PHONES. The speaker will automatically stop to work.
4. Tune to a radio station using the TUNING knob.
To improve reception:
- For FM, pull out the telescopic aerial antenna. To improve the FM Reception, incline and turn
the aerial, reduce its length if the FM-signal is too strong (very close to a transmitter).
- For AM, the unit is provided with a built-in aerial, so there is no need to use the telescopic aerial.
Rotate the unit to find the best position.
CLEANING
Clean the cabinet with a soft cloth moistened with water or mild detergent. Do not use solvents
such as alcohol, benzene or thinner, as they may damage the cabinet finish. Make sure to
disconnect the mains lead from the supply before cleaning.
TECHNICAL SPECIFICATION
Speaker: 3 inches, 8 Ohms dynamic speaker
Power output: 0.3W RMS.
DC Battery: DC 3V (2 x “UM3 / AA”)
Radio frequency AM 530 – 1600 kHz
FM 88 – 108 MHz
Due to continuous product development, design and specifications are subject to change without notice.
PRECAUTIONS
1. For DC operation, simply insert two "UM-3 / AA" batteries for unit operation.
2. Do not leave the batteries in the compartment for a long time. Remove the batteries to avoid
leakage and damage.
3. Do not expose the unit to extreme temperature nor high humidity to ensure normal functioning
for a long lifetime.
For instances, never place the unit in bathing areas nor around stoves and radiators.
4. If you find the unit is not working properly, please take it to your nearest services center. Do
not attempt to repair by yourself.
DECLARATION OF CONFORMITY
Manufacturer Name: Satyatrade S. L.
Address: Pol. Ind. La Raya. C/ Guadalquivir, 2.
Camarma de Esteruelas, 28816 Madrid
Tel: 902 430 967
Fax: 91 8864285
NIF: B83254763
Manufacturing country: China
Description: AM/FM Radio
Sytech® SY-1663 complies with the following directives:
CE standard: EMC Directive 2004/108/EC
ROHS standard: 2011/65/EU Restriction of Hazardous Substance
Signed: Ajeet Nebhwani Utamchandani
Sole Administrator
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Sytech SY1663VR Owner's manual

Sytech
Brand
Sytech
Model
SY1663VR
Category
Radios
Type
Owner's manual

Sytech SY1663VR is a portable AM/FM radio that offers a range of features for a great listening experience. Enjoy your favorite stations with the built-in speaker or connect headphones for private listening. The telescopic antenna enhances FM reception, and the rotary tuning knob allows for precise station selection.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents