please refer to the operating instructions of your mobile phone. Voice dialling using the headset operates in the

same manner as if you were making a call using the phone. The only difference is that voice dialling is activated

To redial the last number dialled, press the “MFB” button twice quickly – the last number dialled is activated and

the call is made.

With some mobile phones, the “connection” between the telephone and the headset is automatically

disconnected after a period. If this is the case, no call signal is heard via the headset for incoming calls. In order

to establish the connection for incoming calls, press the “MFB” button for one second to connect the headset to

the telephone.

As the stereo headset supports so-called Bluetooth AV profiles, it can be used to play MP3 files or radio. However,

this depends on the mobile phone used. See the operating instructions of your mobile phone.

Press the “MFB” button to accept incoming calls while listening to music. Music playback stops so that the call

can be made using the headset.

“MFB” button).