Rockwell Shopseries RS8065 User manual

Category
Lawnmowers
Type
User manual
RS8065
CORDLESS LAWN MOWER EN
RS8065
1
8
9
5
2
3
4
11
10
7
6
RS8065
12
Front Part
Back Part
1
2
3
A
B1
B2
B3
C1
C2
C3
C4
RS8065
1
2
a
1
1
2
a
b
D1
D2
D3
E1
E2
F1
F2 G
RS8065
1
2
K-1
K-2
K-3
L-1
L-2
L-3
13
14
H I
J K
L M1
M2 N
CORDLESS LAWN MOWER EN
7
COMPONENT LIST
UPPER HANDLE
SWITCH LEVER
CABLE CLIP
GRASS BAG FILLING INDICATOR
GRASS COLLECTION BAG
SAFETY KEY
HANDLE KNOBS
LOWER HANDLE
SAFETY FLAP
BATTERY PACK*
MOTOR COVER
CHARGER*(See Fig. A)
BLADE BOLT (See Fig. M1)
BLADE (See Fig. M1)
*
Not all the accessories illustrated or described are included in standard delivery.
1
2
3
4
5
6
7
8
9
12
10
13
11
14
ACCESSORIES
Battery pack 1
Charger 1
Grass collection bag 1
Use good quality accessories marked with a well-
known brand name. Choose the type according to the
work you intend to undertake. Refer to the accessory
packaging for further details. Store personnel can
assist you and offer advice.
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
DQGLQVWUXFWLRQVPD\UHVXOWLQHOHFWULFVKRFNÀUHDQG
or serious injury.
Carefully read the instructions for the safe
operation of the machine.
Save all warnings and instructions for future
reference.
- This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
CORDLESS LAWN MOWER EN
8
or instruction concerning use of the appliance by a
person responsible for their safety.
- Children should be supervised to ensure that they
do not play with the appliance.
Training
a) Read the instructions carefully. Be familiar with
the controls and the proper use of the equipment;
b) Never allow children or people unfamiliar with
these instructions to use the lawnmower. Local
regulations can restrict the age of the operator;
c) Never mow while people, especially children, or
pets are nearby;
d) Keep in mind that the operator or user is
responsible for accidents or hazards occurring to
other people or their property.
Preparation
a) While mowing, always wear substantial footwear
and long trousers. Do not operate the equipment
when barefoot or wearing open sandals;
b) Thoroughly inspect the area where the equipment
is to be used and remove all objects which can be
thrown by the machine;
c) Before using, always visually inspect to see that
the blades, blade bolts and cutter assembly are
not worn or damaged. Replace worn or damaged
blades and bolts in sets to preserve balance;
d) On multi-bladed machines, take care as rotating
one blade can cause other blades to rotate.
Operation
D 0RZRQO\LQGD\OLJKWRULQJRRGDUWFLDOOLJKW
b) Avoid operating the equipment in wet grass,
where feasible;
c) Always be sure of your footing on slopes;
d) Walk, never run;
e) For wheeled rotary machines, mow across the
face of slopes, never up and down;
f) Exercise extreme caution when changing
direction on slopes;
g) Do not mow excessively steep slopes;
h) Use extreme caution when reversing or pulling the
lawnmower towards you;
i) Stop the blade(s) if the lawnmower has to be tilted
for transportation when crossing surfaces other
than grass, and when transporting the lawnmower
to and from the area to be mowed;
j) Never operate the lawnmower with defective
guards, or without safety devices, for example
GHÁHFWRUVDQGRUJUDVVFDWFKHUVLQSODFH
k) Switch on the motor carefully according to
instructions and with feet well away from the
blade(s);
l) Do not tilt the lawnmower when switching on the
motor, except if the lawnmower has to be tilted
for starting In this case, do not tilt it more than
absolutely necessary and lift only the part which
is away from the operator;
m) Do not put hands or feet near or under rotating
parts. Keep clear of the discharge opening at all
times;
n) Not to touch the blades before the disabling
device has been removed and the blades have
come to a complete stop;
o) To remove the disabling device
Whenever leaving the machine unattended,
Before clearing a blockage,
Before checking, cleaning or working on the
machine,
After striking a foreign object,
Whenever the machine starts vibrating
abnormally.
Maintenance and storage
a) Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition;
b) Check the grass catcher frequently for wear or
deterioration;
c) Replace worn or damaged parts for safety;
General Safety Warnings for your Battery Charger
WARNING: Read all safety warnings and all
instructions. Failure to follow the warnings
DQGLQVWUXFWLRQVPD\UHVXOWLQHOHFWULFVKRFNÀUHDQG
or serious injury.
Save all warnings and instructions for future
reference.
- This appliance is not intended for use by persons
(including children) with reduced physical,
sensory or mental capabilities, or lack of
experience and knowledge, unless they have been
given supervision or instruction concerning use
of the appliance by a person responsible for their
safety.
- Children should be supervised to ensure that they
do not play with the appliance.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
TXDOLÀHGSHUVRQVLQRUGHUWRDYRLGDKD]DUG
CORDLESS LAWN MOWER EN
9
ADDITIONAL SAFETY
INSTRUCTIONS FOR YOUR
BATTERY CHARGER
1. Before charging, read the instructions.
2. For charge Lead acid battery pack only.
3. If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
TXDOLÀHGSHUVRQVLQRUGHUWRDYRLGDKD]DUG
4. The battery terminal not connected to the chassis
KDVWREHFRQQHFWHGÀUVW7KHRWKHUFRQQHFWLRQLV
to be made to the chassis, remote from the battery
and fuel line. The battery charger is then to be
connected to the supply mains.
5. After charging, disconnect the battery charger
from the supply mains. Then remove the chassis
connection and then the battery connection.
6. Do not charge a leaking battery.
7. Do not use chargers for works other than those for
which they are designed.
8. Before charging, ensure your charger is matching
the local AC supply.
9. The charging device must be protected from
moisture.
10. Do not use the charging device in the open.
11. Do not short out the contacts of battery or
charger.
5HVSHFWWKHSRODULW\´´ZKHQFKDUJLQJ
13. Do not open the unit and keep out of the reach of
children.
14. Do not charge the batteries of other manufactures
or ill-suited models.
15. Ensure that the connection between the battery
charger and battery is correctly positioned and is
not obstructed by foreign bodies.
16. Keep battery charger’s slots are free of foreign
objects and protect against dirt and humidity.
Store in a dry and frost-free place.
17. When charging batteries, ensure that the battery
charger is in a well-ventilated area and away from
LQÁDPPDEOHPDWHULDOV%DWWHULHVFDQJHWKRW
during charging. Do not overcharge any batteries.
Ensure that batteries and chargers are not left
unsupervised during charging.
18. Do not recharge non-rechargeable batteries, as
they can overheat and break.
19. Longer life and better performance can be
obtained if the battery pack is charged when the
air temperature is between 18
O
C and 24
O
C. Do not
charge the battery pack in air temperatures below
4.5
O
C, or above 40.5
O
C. This is important as it can
prevent serious damage to the battery pack.
20. Charge only battery pack of the same model
provided by manufacturer and of models
recommended by manufacturer.
Safety Warnings for battery pack
a) Do not dismantle, open or shred cells or battery
pack.
b) Do not short-circuit a battery pack. Do not store
battery packs haphazardly in a box or drawer
where they may short-circuit each other or be
short-circuited by conductive materials. When
battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
EXUQVRUDÀUH
F 'RQRWH[SRVHEDWWHU\SDFNWRKHDWRUÀUH$YRLG
storage in direct sunlight.
d) Do not subject battery pack to mechanical
shock.
e) In the event of battery leaking, do not allow the
liquid to come into contact with the skin or eyes.
If contact has been made, wash the affected
area with copious amounts of water and seek
medical advice.
f) Seek medical advice immediately if a cell or
battery pack has been swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with a clean
dry cloth if they become dirty.
i) Battery pack needs to be charged before use.
Always refer to this instruction and use the
correct charging procedure.
j) Do not maintain battery pack on charge when
not in use.
k) After extended periods of storage, it may
be necessary to charge and discharge the
battery pack several times to obtain maximum
performance.
l) Battery pack gives its best performance when
it is operated at normal room temperature
(20°C±5°C).
m) When disposing of battery packs, keep battery
packs of different electrochemical systems
separate from each other.
Q 5HFKDUJHRQO\ZLWKWKHFKDUJHUVSHFLÀHGE\
manufacturer. Do not use any charger other
CORDLESS LAWN MOWER EN
10
WKDQWKDWVSHFLÀFDOO\SURYLGHGIRUXVHZLWKWKH
equipment. A charger that is suitable for one type
RIEDWWHU\SDFNPD\FUHDWHDULVNRIÀUHZKHQXVHG
with another battery pack.
o) Do not use any battery pack which is not
designed for use with the equipment.
p) Keep battery pack out of the reach of children.
q) Retain the original product literature for future
reference.
r) Remove the battery from the equipment when
not in use.
s) Dispose of properly.
Additional safety rules for lead acid battery:
1. Working in the vicinity of a lead-acid battery is
dangerous. Battery pack generates explosive
gases during normal battery operation. For this
reason it is of the utmost importance that each
time before using your charger, you read and
follow the instructions provided exactly.
 1HYHUVPRNHRUDOORZDQRSHQVSDUNRUÁDPHLQ
the vicinity of the battery.
3. Use charger for charging a lead-acid battery pack
only.
4. Never place the charger directly above or below
WKHEDWWHU\SDFNEHLQJFKDUJHGJDVHVRUÁXLGV
from the battery pack will corrode and damage the
charger. Locate the charger as far away from the
battery pack as DC cables permit.
5. Do not operate charger in a closed-in area or
restrict ventilation in any way.
SYMBOLS
Beware of sharp blades. Blades
continue to rotate after the motor
is switched off- Remove disabling
device before maintenance.
Do not burn
Batteries may enter water cycle if
disposed improperly, which can
be hazardous for ecosystem. Do
not dispose of waste batteries as
unsorted municipal waste.
For indoor use only
Positive terminal
Negative terminal
Fuse T 2 A long time lag fuse with
rated current of 2 A
The output plug is with positive
center pole and negative outer pole
Lead-acid battery This product
has been marked with a symbol
relating to ‘separate collection’ for
all battery packs and battery pack. It
will then be recycled or dismantled
in order to reduce the impact on the
environment. Battery packs can be
hazardous for the environment and
for human health since they contain
hazardous substances.
C-Tick approval mark
Read instruction handbook before
operation this machine.
Warning
Keep bystanders away.
CORDLESS LAWN MOWER EN
11
TECHNICAL DATA
INTENDED USE
This product is intended for domestic lawn mowing.
CHARGER SAFETY RULES
1. Plug charger directly into an electrical outlet.
DO NOT ABUSE THE CORD. Never carry charger
by cord. Do not disconnect the charger from the
outlet or mower by pulling it by the cord.
2. CAUTION: 7RUHGXFHWKHULVNRIÀUHHOHFWULFDO
shock, or personal injury do not attempt to
use this charger with any other product.
Likewise, do not attempt to charge the battery
with any other charger.
3. Do not service mower with charger or safety key
installed.
4.
Do not operate a damaged charger. Replace
damaged cords or charger immediately at an
authorized service center.
5. Always charge the mower in a dry area protected
from the weather. Do not expose the mower or
charger to rain. Do not charge in wet locations.
Do not charge mower when temperature is above
104°F (40°C) or below 41°F (5°C).
6. Keep the mower and charger away from water,
heat sources, (Such as radiators, heaters,
VWRYHVHWFÁDPHVRUFKHPLFDOV%HFDUHIXOQRW
to damage the charger cord, by keeping cord away
from sharp edges.
CHARGING PROCEDURE
1. Charging can be carried out only with the battery
REMOVED from the machine (See Fig. A).
2. Plug the charger connector into the receptacle on
the battery. (See Fig. A)
3. Insert the plug of the charger into the wall
receptacle.
4. Press the button on the charger, the red light
should come on indicating that you have power
and the battery is being charged.
NOTE: If you forget to press the button, the red
light will come on after around 30s and the
charger will start charging automatically.
5. The red light should extinguish and the green
light will come on when charging is complete
(approximately 5-7 hours to charge a fully
discharged battery).
6. After fully charged, the green light will extinguish
after 5 seconds automatically to shut off consume
power from power resource. When the battery
self-discharge to a limit, the charger will restart
charging. the battery again if the cord plug is
connected.
NOTE: If the battery is defective, the red light will
ÁDVKLQJ7KHUHGOLJKWVZLOORQO\IXQFWLRQZKHQWKH
charger is connected to both the battery and wall
receptacle.
7. The charger is a smart charger and can stay
connects to the battery and wall receptacle
for extant periods of time without fear of
damaging the battery or charger. The charger will
automatically turn on to ensure the battery is fully
charged.
BATTERY CARE
The battery in your cordless lawnmower is a 24-volt
sealed lead acid system. The mower can be stored in
any position without fear of leakage.
 )RURSWLPDOEDWWHU\OLIHDQGSHUIRUPDQFHWKH
battery should be fully charged every 2 months
during storage
 )RURSWLPDOEDWWHU\OLIHDQGSHUIRUPDQFHWKH
battery should be fully charged after each use
 6WRUHWKHEDWWHU\LQDFRROGU\ORFDWLRQ
 7KHEDWWHU\FDQEHVDIHO\VWRUHGGRZQWR)
(-10°C).
 7KHEDWWHU\GRHVQRWQHHGWREHIXOO\GLVFKDUJHG
before recharging.
 ,QLWLDOO\WRFKDUJLQJF\FOHVPD\EHUHTXLUHG
after purchase to achieve maximum run time
capacity.
Battery capacity:
Cutting diameter:
Cutting height:
Cutting height positions
Grass collection capacity:
No-load speed:
Battery type:
Battery model :
Charging time:
Charger model:
Charger rating:
Protection class:
IP number:
Machine weight:
24V
$K
33cm
PP
3 positions
30L
PLQ
Lead acid
WA3216
5-7hrs
WA3720
,QSXW$&9+]:
Output: 29.5V
, 1.0A
,,
IPX1
14kg
CORDLESS LAWN MOWER EN
12
ADDITIONAL BATTERIES can be obtained from the
Customer Helpline.
ASSEMBLY
IMPORTANT! Before you assemble the lawn
mower, check the accessories according above
information, make sure the accessories are ompleted.
1. FITTING THE HANDLE (see Fig.B1, B2,B3)
1) Remove the screws(x 2) on the both side of deck.
(See Fig.B1)
2) Insert the lower handle (8) into the holes on the
deck provided.
3) Secure with the screws provided.(See Fig. B1)
4) Attach the upper handle (1) with the bolts and
Handle knobs (7) to the lower handle (8). (See Fig.
B2)
5) Screw on the two Handle knobs. Check that the
handle is FULLY secured.
NOTE: Ensure the bolts are fully inserted through the
KDQGOHVEHIRUHÀWWLQJWKHKDQGOHNQREV
6) Attach the cable clips (3) provided, to the upper
and lower handle. Insert the cable into the clips
ensuring there is enough cable slack.(See Fig. B3)
2. GRASS COLLECTION BAG ASSEMBLY
Connect the grass box handle to the box top as shown
in Fig C1-C4.
6WHS3UHVVWKHIURQWRIWKHKDQGOHEULHÁ\6HH)LJ&
Step 2) Then push it forward. (See Fig. C2)
Step 3) Push down the back of the handle. (See Fig. C2)
Step 4) Clip the plastic clips over the metal frame. (See
Fig. C3)
WARNING: 'RQ·WÀWWKHKDQGOHLQUHYHUVHG
direction. Fit the handle as shown in Fig C1.
3. GRASS BAG FITTING (See Fig D1, D2, D3)
1. Turn the mower off, wait until blade stops and
remove safety key (6).
 5DLVHWKHVDIHW\ÁDSDQGKROGLWXS
3. Pick up the grass bag by the handle, and position
grass bag on the lower hooks (a) on the mower
deck. (See Fig. D2)
4. Release the safety guard to lock the grass bag
into position. Ensure the grass bag is installed
securely. (See Fig. D3)
NOTE: Depress the grass bag slightly to ensure that it
is completely installed.
4. REMOVING/EMPTYING
+ROGWKHJUDVVEDJOLIWWKHVDIHW\ÁDSDQGKROGXS
Remove grass collection bag (5).
WARNING: $OZD\VFKHFNWKHVDIHW\ÁDSFDQ
close the discharge outlet tightly before using.
1HYHUOLIWWKHVDIHW\ÁDSZKHQWKHODZQPRZHULV
EHLQJXVHGZLWKRXWÀWWHGJUDVVEDJ
5. FITTING/REMOVING BATTERY (See Fig. E1, E2)
REMOVING BATTERY
Pull out the battery with the battery handle directly.
(See Fig. E1)
NOTE: Be careful not to drop the battery onto your foot
or on the ground when removing it.
FITTING BATTERY
Put the battery into the battery container; make sure
WKHEDWWHU\LVÀWWHGFRUUHFWO\6HH)LJ(
OPERATION
1. STARTING AND STOPPING (See Fig. F1, F2)
WARNING: The blade continues to rotate for a
few seconds after the machine is switched off.
$OORZWKHPRWRUEODGHWRVWRSURWDWLQJEHIRUH
switching “on” again. Do not rapidly switch off and on.
STARTING
1. Insert safety key into the housing of the switch box.
2. Slide the key to the right and hold in position.
3. Pull the lever bar towards the handle and the
mower will start.
4. Release the safety key.
STOPPING
Release the switch lever.
2. GRASS BAG FILLING INDICATOR (See Fig. G)
To remind you immediately to empty when the grass
bag is full, the mower provides an indicator on the
top of bag to show the collection status. And you can
follow as below:
(PSW\VWDWXVÁDSÁRDWD
)XOO\VWDWXVÁDSIDOOGRZQE
3. REAR DISCHARGE (See H)
The mower provides a rear discharge function, so that
you can mower without bag collection. The debris will
be discharged from the rear chute.
CORDLESS LAWN MOWER EN
13
4. BATTERY STATUS LED’S (See Fig. I)
NOTE: The Status LED’s will indicate the battery
condition when the button on the battery is
pressed.
The LED’s constantly senses and displays the battery
condition as follows:
Press the button “POWERTEST”, the light button is
illuminated.
When the three green lights are illuminated, the
battery is in a highly charged condition.
When two lights (
) are illuminated, the battery is
in a moderately charged condition.
When only one green light ( ) is illuminated, the
battery charge is depleted.
%HIRUHXVLQJ\RXUQHZPRZHUIRUWKHÀUVWWLPHLWLV
recommended that the unit be charged overnight to
ensure that the battery is fully charged.
IMPORTANT: When only one light is illuminated,
your battery is overly discharged, even though
the mower may still be capable of cutting grass.
Continuing to operate your lawnmower with the
battery in this discharged condition may reduce
the life and performance of your battery.
6. ADJUSTING THE CUTTING HEIGHT (See Fig. J)
WARNING: Before adjusting the mower height,
wait for the mower to completely stop. Mower
blades continue to rotate after the machine is
switched off and a rotating blade can cause injury.
Wait until all machine components have completely
stopped before touching them and remove safety key
(6).
The lawnmower can be set to 3 cutting heights with
PP
Turn the mower onto its side. Grip one wheel and pull
bar out of the groove and reposition it to the required
KHLJKW)RUÀUVWXVHVHWWKHFXWWLQJKHLJKWDWPP
ALL other wheels should be positioned at the same
height.
7. MOWING TIPS
NOTE: Always inspect area where mower is to be
used and remove all stones, sticks, wire, metal and
other debris which might be thrown by the rotating
blade.
1. Mow across the face of slopes, never up-and-
down. Exercise extreme caution when changing
direction on slopes. Do not mow excessively steep
slopes. Always maintain good footing.
2. Release switch lever to turn mower “OFF” when
crossing any graveled area (stones can be thrown
by the blade).
3. Set mower at highest cutting height when mowing
in rough ground or in tall weeds. Removing too
much grass at one time can cause circuit breaker
to trip, which stops mower.
4. If a grass bag is used during the fast growing
season, the grass may tend to clog up at the
discharge opening. Release switch lever to turn
mower “OFF” and remove the safety key. Remove
the grass bag and shake the grass down to the
back end of the bag. Also clean out any grass or
debris which may be packed around the discharge
opening. Replace the grass bag.
5. If mower should start to vibrate abnormally,
release switch lever to turn mower “OFF” and
remove safety key. Check immediately for cause.
Vibration is a warning of trouble. Do not operate
mower until a service check has been made.
6. ALWAYS RELEASE SWITCH LEVER TO TURN MOWER
OFF” AND REMOVE SAFETY KEY WHEN LEAVING IT
UNATTENDED EVEN FOR A SHORT PERIOD OF TIME.
MAINTENANCE
WARNING: Stop the mower and remove the
safety key before removing the grass bag.
NOTE: To ensure long and reliable service, perform the
following maintenance procedures regularly. Check
for obvious defects such as a loose, dislodged or a
GDPDJHGEODGHORRVHÀWWLQJVDQGZRUQRUGDPDJHG
components. Check that the covers and guards are
all undamaged and are correctly attached to mower.
Carry out any necessary maintenance or repairs
before operating mower. If the mower should happen
to fail despite regular maintenance, please call our
customer helpline for advice.
BLADE SHARPENING
KEEP BLADE SHARP FOR BEST MOWER
PERFORMANCE. A DULL BLADE DOES NOT CUT
GRASS CLEANLY.
WEAR PROPER EYE PROTECTION WHILE
REMOVING, SHARPENING, AND INSTALLING BLADE.
ENSURE THAT SAFETY KEY IS REMOVED.
Sharpening the blade twice during a mowing season
LVXVXDOO\VXIÀFLHQWXQGHUQRUPDOFLUFXPVWDQFHV
Sand causes the blade to dull quickly. If your lawn has
sandy soil, more frequent sharpening may be required.
REPLACE BENT OR DAMAGED BLADE IMMEDIATELY.
CORDLESS LAWN MOWER EN
14
WHEN SHARPENING THE BLADE:
1. Make sure blade remains balanced.
2. Sharpen blade at the original cutting angle.
3. Sharpen cutting edges on both ends of blade,
removing equal amounts of material from both
ends.
TO SHARPEN BLADE IN A VISE (See Fig. K)
1. Be sure the switch lever is released, the blade
has stopped and the safety key removed before
removing the blade.
2. Remove blade from mower. See instructions
for removing and attaching blade (BLADE
MAINTENANCE).
3. Secure blade K-1 in a vise K-2.
4. Wear safety glasses and be careful not to cut
yourself.
 &DUHIXOO\ÀOHWKHFXWWLQJHGJHVRIWKHEODGHZLWKD
ÀQHWRRWKÀOH.RUVKDUSHQLQJVWRQH
6. Check balance of blade. See instructions for blade
balancing.
7. Replace blade on mower and tighten securely.
Refer to instructions below.
BLADE BALANCING (See Fig. L)
Check balance of blade by placing center hole in blade
L-1 over a nail or screwdriver shank L-2, clamped
horizontally in a vise L-3. If either
HQGRIWKHEODGHURWDWHVGRZQZDUGÀOHWKDWHQG%ODGH
is properly balanced when neither end drops.
BLADE MAINTENANCE (See Fig. M1, M2)
Renew your metal blade after 50 hours mowing
or 2 years, which ever is the sooner-regardless of
condition.
Follow these procedures to remove and replace the
blade. You will need garden gloves (not provided) and
a spanner wrench (not provided) to remove the blade.
Hold the blade (14) and unscrew the blade bolt (13)
counter-clockwise using a spanner wrench, and then
remove blade.
To re-assemble, double check blade washer and blade
À[HGFRUUHFWO\VHH)LJ07KHQSRVLWLRQWKHEODGH
(14) with the cutting edges towards the ground. Then
securely tighten the blade bolt (13).
IMPORTANT BATTERY INSTRUCTIONS
READ USERS MANUAL PRIOR TO USE
1. Fully charge battery after each use.
2. Make sure the battery is fully charged before
storage.
3. Charge the battery every two months during
storage.
4. At all times, keep the battery in the upright
positions.
STORAGE: (See Fig. N)
Stop the mower and always remove the safety key.
Clean the exterior of the machine thoroughly using
a soft brush and cloth. Do not use water, solvents
or polishes. Remove all grass and debris, especially
from the ventilation slots.
Turn the machine on its side and clean the blade area.
If grass cuttings are compacted in the blade area,
remove with a wooden or plastic implement.
Store the machine in a dry place. Do not place other
objects on top of the machine.
To aid storage, release the handle cam lever, and
rotate or fold the upper handle.
Staple your purchase
receipt here
Before returning this product for
warranty or any other reason, please call.
POSITEC AUSTRALIA PTY LIMITED
ABN 14 101 682 357
Unit 15, 23 Narabang Way Belrose 2085 NSW Australia
FREE CALL 1300 889 028
(0$,/RIÀFHVDOHV#SRVLWHFFRPDX
CORDLESS LAWN MOWER EN
15
TROUBLE SHOOTING
Problem Solution
1. Mower doesn’t run
when switch lever is
activated.
A. Check to make sure safety key has been installed and is fully seated and that
button on switch housing is being completely pushed.
B. Release switch lever to turn mower off. Remove safety key, turn mower over and
check that blade is free to turn. If not free, return to an authorized servicer. Blade
should turn freely.
C. Has battery been fully charged? Plug in charger and wait for green light to come on.
2. Motor stops while
mowing.
A. Release switch lever to turn mower off. Remove safety key, turn mower over and
check that blade is free to turn. If not free, return to an authorized servicer. Blade
should turn freely.
B. Raise cutting height of wheels to highest position and start mower.
C. Has battery been fully charged? Plug in charger and wait for green light to come on.
D. Avoid overloading the mower. Slow down the cutting pace by pushing mower
slower or raise the cut height. Or both.
3. Mower runs but
cutting performance
is unsatisfactory, or
does not cut entire
lawn.
A.
Has battery been fully charged? Plug in charger and wait for green light to come on.”
B. Release switch lever to turn mower off. Remove safety key. Turn mower over and
check: Blade for sharpness - Keep blade sharp. Deck and discharge chute for
clogging.
C.
Wheel height adjustment may be set too low for grass condition. Raise cutting height.
4. Mower is too hard
to push.
A. Raise cutting height to reduce deck drag on grass. Check each wheel for free
rotation.
5. Mower is
abnormally noisy and
vibrates.
A. Release switch lever to turn mower off. Remove safety key. Turn mower on side
and check blade to ensure it has not been bent or damaged. If blade is damaged,
replace with a replacement blade. If the underside of the deck is damaged return
mower to an Authorized service center.
B. If there is no visible damage to the blade and the mower still vibrates: Release
switch lever to turn mower off, remove safety key and remove blade. Rotate
blade 180 degrees and retighten. If mower still vibrates, return the mower to an
authorized service center.
6. Battery charger
LED’s not on.
A. Check plug connection.
B. Replace charger.
7. Battery charger LED
does not flip to green.
A. Battery needs to be diagnosed. Take to authorized service center.
8. Mower not picking
up clippings with the
Grass Collection Bag.
A. Remove mulch plate when bagging.
B. Chute clogged. Release switch lever to turn mower off. Remove safety key. Clear
chute of grass clippings.
C. Too much cut grass. Raise cutting height of wheels to shorten length of the cut.
D. Bag full. Empty bag more often.
9. When mulching
there are clippings
visible.
A. Too much cut grass. Raise cutting height of wheels to shorten length of the cut.
'RQRWFXWRIIPRUHWKDQRIWRWDOOHQJWK
B. Check blade for sharpness. Always keep blade sharp.
10. Low or diminished
run-time after many uses
A. Return to Authorized Service location - may need new battery
MADE IN PRC
Copyright © 2013, Positec. All Rights Reserved.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Rockwell Shopseries RS8065 User manual

Category
Lawnmowers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages