Falcon SC81 Installation guide

Type
Installation guide

Falcon SC81 is a versatile door closer designed to provide smooth and controlled door operation. With adjustable spring power, it can accommodate doors of varying widths and weights. The SC81 features a unique Spring-N-Stop arm that allows you to set the door to open at a specific angle, making it ideal for applications where you need the door to stay open, such as in a busy office or retail environment. Additionally, the SC81 has a built-in backcheck function to prevent the door from swinging too far open and damaging walls or furniture.

Falcon SC81 is a versatile door closer designed to provide smooth and controlled door operation. With adjustable spring power, it can accommodate doors of varying widths and weights. The SC81 features a unique Spring-N-Stop arm that allows you to set the door to open at a specific angle, making it ideal for applications where you need the door to stay open, such as in a busy office or retail environment. Additionally, the SC81 has a built-in backcheck function to prevent the door from swinging too far open and damaging walls or furniture.

SC 80 SERIES DOOR CLOSER
Parallel Arm
Installation
Closer mounted on push side of
door.(Opposite of the hinge side)
IMPROPER INSTALLATION OR REGULATION MAY
RESULT IN PERSONAL INJURY OR PROPERTY DAMAGE.
FOLLOW ALL INSTRUCTIONS CAREFULLY. FOR
QUESTIONS, CALL FALCON AT 1-877-671-7011
CAUTION
! !
Una instalación o un ajuste incorrectos pueden resultar en
daño personal o material. Siga bien todas las instrucciones.
para más informaciones, llama a lcn al
1-877-671-7011
ADVERTENCIA
! !
Une installation ou un réglage inadéquats peuvent
entraîner des blessures ou des dommages.Veuillez
suivre toutes les instructions avec soin. Pour plus de
renseignements, composez le
1-877-671-7011
DANGER
! !
DA
Main Speed Valve
Vitesse de fermeture
Velocidad principal
= Spring Power Adjustment
Réglage de la force du resort
Ajuste de la potencia del resorte
BC
BC = Backcheck Valve
Résistance douverture
Resistencia de apertura
SC81 (1-6 Adj.)
INSTALLATION INSTRUCTION
SC81 (1-6 Adj.)
SC81 (1-6 Adj.)
Latch Speed Valve
Vitesse de verrouillage
Velocidad del seguro
DA = Delay Action Valve (Optional)
Soupape de retardement (Optionnelle)
Válvula de retardación (Opcional)
(Optional)
(Optionnelle)
(Opcional)
Installation "bras parallèle" Ferme-porte installé sur le côté à
pousser de la porte. (À lopposé du côté de la charnière)
Instalación "brazo paralelo" Cerrador montado a lado del empuje
de la puerta. (Opuesto al lado del gozne)
FERME-PORTE SÉRIE SC 80
INSTRUCTIONS D'INSTALLATION
CERRADOR DE PUERTA SERIE SC 80
INSTRUCCIONES DE INSTALACIÓN
FASTENERS
DOOR OR
FRAME
DRILL-SIZES
CLOSER
BODY
WOOD
METAL
WOOD
METAL
1/8"
drill: #7
tap: 1/4-20
drill: #7
tap: 1/4-20
1/4-20 machine
1/4-20 machine
1/8"
#14 wood
#14 wood
ARM SHOE
WOOD
METAL
1/8"
drill: #7
tap: 1/4-20
1/4-20 machine
#14 wood
FIFTH HOLE
SPACER
Thru-bolt
3/8"
ALL
CLOSER
BODY
Spring-N-Stop & Spring-N-Stop/Hold Open Arm Models
Modèles avec bras Spring-N-Stop
& Spring-N-Stop/avec retenue
Modelos con brazo Spring-N-Stop
& Spring-N-Stop/con retención
© Allegion 2016
Printed in U.S.A.
43164 Rev. 08/16-f
1-877-671-7011 www.allegion.com/us
Servicio al clienteCustomer Service
Service à la clientèle
SC 80 SERIES
*Spring power faces the hinge edge.toward
Force du ressort fait face le bord de la charnière.
Potencia del resorte cara el borde del gozne.
vers
hacia
45°
1.
4.
5.
6.
7.
3/4
19 mm
12
305 mm
79 mm
3 1/8
Adjustment Instructions
Instructions de réglage
Instrucciones de ajuste
2.
Determine door width, adjust spring
power to match chart.
RIGHT HAND DOOR ILLUSTRATED. Same dimensions apply for Left Hand Door measured from hinge side.
PORTE MAIN DROITE ILLUSTRÉE. Les mêmes dimensions sappliquent pour une porte Main Gauche mesurées à partir du côté de la charnière.
MONTAJE DE PUERTA A LA DERECHA COMO ILUSTRADO. Las mismas dimensiones se aplican para un montaje de puerta a la izquierda medidas a partir del lado del gozne.
Mesurez la largeur de la porte. Réglez le ressort
selon les indications du tableau.
Determina la anchura de la puerta. Ajuste la
potencia del resorte según lo indicado en
el gráfico.
Attach pinion cap and slim cover
(Cap not used with full cover)
Attachez le capuchon et le couvercle
mince.(Le capuchon nest pas utilisé
avec le couvercle complet)
Sujete el capuchón y la cubierta
delgada. (No se usa la tapita con la
tapa completa)
*
C
L
Install closer onto door.
Installez le ferme-porte sur la porte.
Monte el cerrador en la puerta.
1
2
3
BC
3.
Install arm & shoe assembly onto frame.
Installez l'assemblage du bras et de la
console sur le cadre.
Instale el ensamblaje del brazo y de la
zapata en el cuadro.
Attach main arm to closer.
Attachez le bras principal au
ferme-porte.
Coloque el brazo principal al
cerrador.
1
2
3
SPRING N STOP - Parallel Arm
Fifth hole spacer
Espaceur du
cinquième trou
Espaciador para
el quinto agujero
5 7/8"- 149mm
3 7/8"- 98mm
2 3/4"- 70mm
5 1/8"- 130mm
95°
90°
105°
A
A
115°
Securely attach spring block to shoe.
(Right hand shown)
Fixez solidement le bloc ressort au sabot
(main droite illustrée)
Sujeta seguramente el bloque resorte a la
zapata (Mano derecha ilustrada)
* Hold open point is 5° less than dead stop opening.
Dead Stop
Opening
*
BRAZO DE RETENCIÓN: Para embragar o desembragar la
característica de retención, dar un cuarto de vuelta (1/4)
al cabo.
BRAS DE RETENUE: Pour engager ou désengager le
mécanisme de retenue,tournez la manette de contrôle d'un
quart (1/4) de tour.
HOLD OPEN ARM: To engage
or disengage hold open feature,
turn control handle one-quarter
(1/4) turn.
-
+
SC81 (1-6)
32"
- 815mm
42"
- 1050mm
48"
- 1220mm
36"
- 915mm
30"
- 750mm
0
+ 12
+ 9
+ 3
+ 15
+ 6
Door and Frame Preparation A. Choose degree of door opening B. Drill per screw chart. (See front page)
Préparation de la porte et du cadre A.Sélectionnez le degré douverture désiré B.Percez selon les indications du tableau (voir la page frontispice)
Preparación de la puerta y del cuadro A.Elija el grado de apertura de la puerta B.Barrene según el gráfico (Vea la página de la cubierta)
Optional Delay Action
4
4
9” 229mm
10 1/8” 257mm
11 1/4” 286mm
12 1/8” 308mm
11/16”
17 mm
1
1/16
27 mm
1
11/16
43 mm
3
3/16
81 mm
  • Page 1 1
  • Page 2 2

Falcon SC81 Installation guide

Type
Installation guide

Falcon SC81 is a versatile door closer designed to provide smooth and controlled door operation. With adjustable spring power, it can accommodate doors of varying widths and weights. The SC81 features a unique Spring-N-Stop arm that allows you to set the door to open at a specific angle, making it ideal for applications where you need the door to stay open, such as in a busy office or retail environment. Additionally, the SC81 has a built-in backcheck function to prevent the door from swinging too far open and damaging walls or furniture.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI