2. AMP Lighting
  3. ASAC-SPAN1-S-BK

AMP Lighting ASAC-SPAN1-S-BK Installation & Maintenance Manual

  • Hello! I am an AI chatbot trained to assist you with the AMP Lighting ASAC-SPAN1-S-BK Installation & Maintenance Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTALLATION & MAINTENANCE GUIDE
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
www.amplighting.com
AMP
®
Solar Landscape Lighting
AMP
®
Solar Panel with Frame
ASAC-SPAN1-S-BK & ASAC-SFRAME1-S-BK
AMP
®
Solar Panel with Frame
ASAC-SPAN1-S-BK & ASAC-SFRAME1-S-BK
INSTALLATION & MAINTENANCE GUIDE
www.amplighting.com
–2–
Important Safety Instructions: Read Before Installation
!
Important Safety Instructions
!
This solar panel is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the
warranty.
These instructions do not intend to cover all variations in installation,
operation maintenance or mounting situations.
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Place and direct the solar panel in areas with ample sunlight during the
day to get best results.
2. Do NOT place solar panel in or around water or re.
3. Do NOT place the battery in or around water, re or any other high-tem-
perature locations.
4. Do NOT place the battery backwards, causing the polarity to be re-
versed.
5. Do NOT connect the positive terminal and the negative terminal of the
battery to each other with any metal object (such as wire).
6. Do NOT carry or store the batteries together with necklaces, hairpins, or
other metal objects.
7. Do NOT pierce the battery, strike the battery with a hammer, step on
the battery, or otherwise subject it to strong impacts or shock.
8. Do NOT solder directly onto the battery.
9. Do NOT expose the battery to fresh or salt water, or allow the battery to
get wet.
10. Do NOT place the battery in direct sunshine, or use or store the battery
inside vehicles in hot weather.
11. Do NOT disassemble or modify the battery. If necessary, replace batter-
ies only with approved batteries from manufacturer.
Package Contents
A. (1) Solar Panel
B. (1) Bracket
[email protected] • 813.978.3900
Product Dimensions
–3–
24.8”
12.35”
Bracket
Product Dimensions
17.3”
21.25”
1”
Solar Panel
INSTALLATION & MAINTENANCE GUIDE
–4–
www.amplighting.com
–4–
2
1
AMP
®
Solar Panel with Frame
ASAC-SPAN1-S-BK & ASAC-SFRAME1-S-BK
Attach the Bracket to the Panel
Attach the bracket to the panel by
using the screws and Allen wrench.
Screw
Allen
Wrench
Bracket
Connect Solar Panel to Battery Box
Align the plug on the end of the cable and the plug on the solar panel
and push them together. Then thread the cap onto them and hand tight-
en until snug.
Battery Box
Plugs
Cable
Cap
[email protected] • 813.978.3900
–5–
INSTALLATION & MAINTENANCE GUIDE
3
AMP
®
Solar Panel with Frame
ASAC-SPAN1-S-BK & ASAC-SFRAME1-S-BK
Adjust Solar Panel
Adjust the solar panel angel by moving the bar of the bracket along
the slots. There are four different slots to adjust the solar panel to
four different angles.
1
1
2
2
3
3
4
4
Solar Panel
Bar
BracketSlot
INSTALLATION & MAINTENANCE GUIDE
–6–
www.amplighting.com
–6–
AMP
®
Solar Panel with Frame
ASAC-SPAN1-S-BK & ASAC-SFRAME1-S-BK
–6––6–
[email protected] • 813.978.3900
–7–
IS-ASAC-SPAN1-S-BK-ver1.pdf
Specications and product details subject to change without notice.
© Copyright 2020, AMP
®
Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • 813.978.3900
Help Hotline:
1-813-978-3900 • Mon-Fri 9am-6pm (EST)
www.amplighting.com
/