Goldmund LOGOS SUKHA User manual

Category
Home audio sets
Type
User manual

Goldmund LOGOS SUKHA is a high-quality active speaker system that utilizes advanced technologies to deliver exceptional sound reproduction. With its innovative design and powerful features, the LOGOS SUKHA is ideal for discerning audio enthusiasts seeking an immersive and accurate listening experience. Here are some of its key capabilities:

  • Wireless Connectivity: The LOGOS SUKHA supports wireless audio streaming, allowing you to connect to your music sources without the hassle of cables.

  • Digital Signal Processing: The speaker employs advanced digital signal processing (DSP) technology to optimize the audio performance, ensuring precise and balanced sound reproduction across the entire frequency range.

Goldmund LOGOS SUKHA is a high-quality active speaker system that utilizes advanced technologies to deliver exceptional sound reproduction. With its innovative design and powerful features, the LOGOS SUKHA is ideal for discerning audio enthusiasts seeking an immersive and accurate listening experience. Here are some of its key capabilities:

  • Wireless Connectivity: The LOGOS SUKHA supports wireless audio streaming, allowing you to connect to your music sources without the hassle of cables.

  • Digital Signal Processing: The speaker employs advanced digital signal processing (DSP) technology to optimize the audio performance, ensuring precise and balanced sound reproduction across the entire frequency range.

USER MANUAL
GOLDMUND LOGOS SUKHA
Wireless Speaker System
GOLDMUND LOGOS SUKHA Active Speaker - 2
Thank you for purchasing the Goldmund LOGOS SUKHA active speaker. Goldmund fully
incorporates the technological expertise developed by our company throughout many
years. Please take some time to read this manual. It will provide you with useful information
to make your pleasure of listening to the LOGOS SUKHA speaker even higher.
INTRODUCTION
GOLDMUND LOGOS SUKHA Active Speaker
Goldmund was founded in 1978 and has ever since been dedicated to the accurate
reproduction of sound and image.
At Goldmund, we strive to lead in the creation, development and manufacture of the
industry’s most advanced technologies, including audio and video systems.
The guiding principle at Goldmund is to produce a precise sound with the least possible
loss of quality through the different stages. Goldmund will never adopt a technology before
it is sufficiently developed to satisfy the high quality standards we set. This is why
Goldmund has often rejected mainstream technologies and developed its own.
GOLDMUND LOGOS SUKHA Active Speaker - 3
Table of Contents
1
PRELIMINARIES 5
2
UNPACKING 5
3 SPEAKERS LOCALISATION 6
4 ASSEMBLING THE FRAME 7
5
CONNECTIONS 8
6
RUNNING IN 10
7
MAINTENANCE AND CLEANING 10
8
TECHNICAL DATA 11
9
SCHEMATIC 12
GOLDMUND LOGOS SUKHA Active Speaker - 4
W A R N I N G !
Only careful use can provide the
satisfaction you are expecting from this
product.
All handling must be performed according to
the following instructions to avoid deterioration
of the speaker.
Nevertheless, if the instructions are carried
out in full, you will notice that the use of the
LOGOS SUKHA active speaker is quite
simple and convenient.
IMPORTANT
PLEASE DO NOT CONNECT ANY CABLES
OR MOVE ANY PARTS BEFORE READING
THE FOLLOWING INSTRUCTIONS.
GOLDMUND LOGOS SUKHA Active Speaker - 5
1 PRELIMINARIES
The LOGOS SUKHA active speaker uses very innovative technologies to achieve a level of
definition and neutrality never found before in a speaker system.
Please read very carefully the following instructions. These high-precision speakers are
extremely revealing and can provide the best sound only if they are used properly.
For exacting technicians, musicians, and all those who demand the very best in audio
reproduction, we strongly recommend the use of the best associated components,
especially electronics and cables.
2 UNPACKING
The LOGOS SUKHA active speaker requires special attention during unpacking, we
recommend 4 people for unpacking and installation of this unit, some handling steps
necessitate a lot of care.
ATTENTION
If you need to return the speakers to the factory or to your local representative for a
warranty repair, please note that it must be repacked in the original packing. This
packaging has been designed especially to protect the speaker in transit. Use of alternative
packaging will almost inevitably result in damage, which cannot be covered by the
warranty.
GOLDMUND LOGOS SUKHA Active Speaker - 6
3 SPEAKERS LOCALISATION
A rigid floor is very important for the optimal sonic result of your LOGOS SUKHA.
In stereo, the ideal location of the speaker in the room has to be found by experiment.
Avoid standing the speakers in the corner of the room and try to set them away from any
adjacent wall by 60cm (2 feet) minimum. The proper listening position is located by 1 to 1.5
times the distance between the speakers at equal distance from each. If the room size
permits, try separating the speakers by minimum 3m (10’) to provide a large stereo image.
In multi-channel system, it is recommended to put the speakers as close as possible to the
positions shown in the figure below:
Front-Left
25° - 30°
100° - 115°
Front-Right
Center
Rear-Left
Rear-Right
Listening
position
Depending on the room acoustics, the speakers may be standing parallel or slightly tilted
toward the listener.
GOLDMUND LOGOS SUKHA Active Speaker - 7
4 ASSEMBLING THE FRAME
First put speakers on their sides on the floor. Use a soft cushion to avoid damaging
them.
Screw the pointed bars in the threading accessible in the Sukha speaker bottom
plate (2 & 5). Tighten them as much as you can.
Screw two black wheels on each side of the speaker using the two provided screws
(1a).
Lift the Sukha Woofer speaker and put it on the frame (3).
Two people are required to fix the Woofer speaker. One person must hold the
speaker in place whilst the other attaches the two lateral wheels to the sides of the
speaker through the frame (1a). For each side, use two long steel screw (M6x40)
provided with the speaker. Use two wheels to fix the frame to the Woofer speaker.
Tighten it as much as possible (4a).
Two people are required to lift the Sukha Tweeter/Medium speaker plus bar
assembly into place. The Sukha Woofer point of the Sukha Tweeter/Medium
speaker bar need to be inserted into the screw-head located on the top of the
Sukha Woofer speaker. Have one person guide the bar into place without
scratching the surface. Once the Sukha Tweeter/Medium is in position with the bar
point resting in the screw-hole on top of the Woofer, one person must hold the
speaker in place whilst the other use two wheels to fix the speaker to the frame
(1b). For each side, use two long steel screw (M6x40) provided with the speaker.
Use two wheels to fix the frame to the Tweeter/Medium speaker. Tighten it as much
as possible (4b).
Adjust the 4 leveling screws of each foot to provide a stable position to the speaker
(6), the weight of the speaker should be put on the pointed bar for a better
mechanical grounding.
GOLDMUND LOGOS SUKHA Active Speaker - 8
5 CONNECTIONS
Wiring:
Usable in any type of configuration, the LOGOS SUKHA has built-in amplifiers with built-in
input DSP crossovers. The input is an unbalanced digital input (S/PDIF).
When used with a digital input signal, connect the digital cable to the digital input
connector.
Wireless:
To achieve optimal performance, please observe the following points:
The LOGOS SUKHA and the USB dongle or Wireless Transmitter should be placed
in the same room.
There should be no metallic obstacles between the USB dongle or Wireless
Transmitter and the LOGOS SUKHA, which could influence the wireless link.
The computer with the USB dongle should not be moved around during playback.
Wireless audio link range:
The range of the wireless audio link depends on several factors, such as the amount of
WiFi equipment used in proximity of the LOGOS SUKHA system, as well as the building
materials and the architecture of the room.
Depending on the above mentioned factors, the maximum range will normally be from 5 to
20 meters.
To use the LOGOS SUKHA in wireless, follow these steps:
Connect the speaker to a mains outlet using the power cords contained in the box.
GOLDMUND LOGOS SUKHA Active Speaker - 9
5 CONNECTIONS (Ctd.)
Connect the USB dongle to an USB port on your computer or the Wireless
Transmitter to the corresponding output channel of your acoustic processor.
If you use the USB dongle: in your computer’s audio settings, select the USB
dongle as the audio output. If you use the Wireless Transmitter: contact your
Goldmund representative who will be able to load and change the configuration file
into your acoustic processor.
The system is now set up and ready to be used. The volume is set directly on the computer
(when used with the dongle) or on the acoustic processor (when used with a Transmitter).
The LOGOS SUKHA and the associated USB Goldmund dongle are delivered prepaired
from the factory. This means that your speakers can only function with the dongle that was
paired with it. However, if you would like to do a re-pairing of the speaker with the dongle
for any reason, please follow these steps:
Connect the USB dongle to your computer or the Wireless Transmitter to your
acoustic processor.
Insert a small screwdriver into the pairing hole located on the back panel of your
speaker, just above the input RCA.
Gently press the internal pairing button using the screwdriver.
As soon as the pairing is done, the led locking led will light up.
The pairing is done.
In case you lose your dongle, you can order another one from your distributor who will also
pair it to your speakers.
The digital signal is treated with the Proteus technology. The LOGOS SUKHA has no
active filtering (hardware crossover).
The LOGOS SUKHA uses a full digital filtering, the crossover is made by software inside
the DSP speaker board.
Only an official Goldmund representative is able to load and change the configuration file,
do not change it by yourself.
Attention:
Due to the high gain of the LOGOS
SUKHA speaker, please make sure
that the media player is set to a low
output level, before connecting the
dongle to the computer.
GOLDMUND LOGOS SUKHA Active Speaker - 10
5 CONNECTIONS (Ctd.)
A wrong setting can damage the speakers; the warranty will not cover any factory change
without the approval of an official Goldmund representative
The LOGOS SUKHA is automatically powered ON when it receives modulation. When the
digital input does not receive any data for 3 seconds, the drivers are muted. They are de-
muted as soon as a signal is present on the digital input and the orange led will light up.
Main power must not be removed while the LOGOS SUKHA is not muted (please wait 3
seconds after the music stops before removing the mains power).
6 RUNNING IN
The LOGOS SUKHA active speaker has been tested at the factory. However, as any high
quality speaker system, the LOGOS SUKHA needs several days playing music before
reaching the top sonic quality they are built for. The few first hours can be very frustrating
for a demanding listener.
Do not hesitate to let them play quite loud for some time before attempting any real system
tuning or position adjustment.
7 MAINTENANCE AND CLEANING
To clean the metal case of the speaker, you can use a clean, soft, damp cloth. Dampen
with water or a mild detergent solution. Avoid abrasive or harsh cleansers (e.g. Products
containing sodium carbonate).
The identification plate is plated with precious metal. Simply clean it with a soft cloth,
without any chemical solution.
GOLDMUND LOGOS SUKHA Active Speaker - 11
8 TECHNICAL DATA
Specifications
Fully constructed in metal with implementation of the mechanical grounding system
to evacuate vibrations.
Frequency response: 26Hz (-6dB) > 25kHz
Built-in 600 W Telos amplifier per side
2 x 175 W for medium & tweeter
1 x 250 W for woofer
Rated power consumption: 390W per unit
Amplifier dynamic range: > 100 dB (no weighting)
Wireless audio stream from USB dongle or Goldmund Transmitter
Digital input
Driver
1 x soft dome tweeter, 1 x 6.5” medium and 1 x 12” woofer, selected for their high
linearity and dynamics.
Bass load
Vent loading
Voltage
Nominal range: 117V or 234V (+/-15%)
Size and weight
520 W x 565 D x 1134 H (mm), 185 kg per side with frame
Warranty
3 years, parts and labor.
GOLDMUND LOGOS SUKHA Active Speaker - 12
9 SCHEMATIC
RevA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Goldmund LOGOS SUKHA User manual

Category
Home audio sets
Type
User manual

Goldmund LOGOS SUKHA is a high-quality active speaker system that utilizes advanced technologies to deliver exceptional sound reproduction. With its innovative design and powerful features, the LOGOS SUKHA is ideal for discerning audio enthusiasts seeking an immersive and accurate listening experience. Here are some of its key capabilities:

  • Wireless Connectivity: The LOGOS SUKHA supports wireless audio streaming, allowing you to connect to your music sources without the hassle of cables.

  • Digital Signal Processing: The speaker employs advanced digital signal processing (DSP) technology to optimize the audio performance, ensuring precise and balanced sound reproduction across the entire frequency range.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI