Westinghouse WGCM080LP130 Quick start guide

Westinghouse
Brand
Westinghouse
Model
WGCM080LP130
Category
Water heaters & boilers
Type
Quick start guide
Stainless Steel, Gas red
Commercial Water Heater
Up to 96% Thermal Efciency
Up to 5:1 Turndown Ratio
Industry rst for Condensing Water
Heaters: Top and Side Connection
Choices for Inlet and Outlet
Ease of Installation
Extremely lightweight tank fits virtually
anywhere; 100 gallon: 63” height &
80 gallon: 55“ height
316L Stainless Steel Tank
Eliminates the need for anode rods
Vents in Inexpensive PVC
or CPVC pipe
Combined vent lengths up to 200’ in 3”
pipe or vent lengths up to 85’ in 2” pipe
Beautiful Stainless Steel Look
80/100 Gallon - 130k /199k Btuh
Inlet / Outlet Connections On Both The Top & Side
This water heater will accommodate even the
most difficult installations with lower clearance
and multiple inlet and outlet connections making
it easier to replace traditional center ue heaters.
Top hot water outlet
(stainless steel)
Top cold water inlet
(stainless steel)
Tank constructed of
316L stainless steel
Insulated w/ water
blown foam
2” thick in the side wall
w/ a rating of R14.2
- 3” thick in the top
w/ a rating of R21.3
Factory installed
ASME rated
temperature
and pressure
relief valve
Low water cutoff sensor
Lower (cold water)
temperature sensor
Upper (hot water)
temperature sensor
Side cold water inlet
(stainless steel)
Exhaust adaptor to PVC /
CPVC / PolyPro venting
Venting Options:
- Direct vent side wall
- Direct vent vertical
- Unbalanced venting
- Room air
- Combined vent /air intake
length up to 200ft
Proprietary heat
exchanger: body
constructed of
90/10 cupronickel
top section constructed
of 800H stainless steel
High limit safety sensor
Side hot water outlet
(stainless steel)
A Closer Look
Inlet / Outlet Connections On Top & Side
Laser Welded Tank
An advanced laser allows for more precise welding
through a concentrated heat source, producing
high quality 316L stainless steel tank construction
with stronger, long lasting seams.
Stainless steel burner
- 120 volt motor w/
wave modulation
control
Condensate trap
assembly
Components located
on front of heater for
easy service access,
all related hardware is
made of stainless steel
studs and brass nuts
Digital LED display
system monitoring
and temperature
adjustment
Why Choose A Stainless Steel Tank?
Because They Are Built To Last!
All coated tanks require
anodes to delay inevitable
corrosion and tank failure.
The average commercial water
heater lasts about 6 years. The
Westinghouse Gas fired Com-
mercial Water Heater stain-
less steel tank will outlast any
coated steel tank in the market.
The Advantages
Eliminates Scale Build-up on HX
Prolongs Tank Life
No Need for Anode Rods
Light Weight Construction
Stainless Steel vs. Glass-Lined
Westinghouse’s
100 GAL. Tank
405 Lbs.
(Shipping Weight)
Top Competitor’s
100 GAL. Tank
550 Lbs.
SCALE BUILD-UP
NO Anode Rods Needed!
-Durable Construction
-High Performance
-Excellent Heat
Transfer Capabilities
-Self Cleaning
Stainless Steel (1.65mm thick)
welded to the top of the heat
exchanger where flue gas is
the hottest.
Transitions to 90/10 Cupronickel
(1.1mm thick) spiral design that
expands and contracts rapidly
with the change in temperature
eliminating scale build-up.
HTP’s Unique Heat Exchanger
G
E
F
*ALL DIMENSIONS ARE APPROXIMATE, A SUFFIX OF "LP" DENOTES PROPANE GAS
LP-179-B
PHOENIX MULTI FIT WATER HEATER SPECIFICATION
MODEL* INPUT MODULATION
AIR INTAKE/
EXHAUST
VENT SIZE
INLET/
OUTLET
SIZE
GAS
LINE
CONN.
SYSTEM
RELIEF
PIPE SIZE
SHIPPING
WEIGHT
MAX.
TEMPERATURE
LIMIT
PHM130-80 35,000 - 130,000 2" 1-1/2" 227 GAL
FIRST
HOUR
RATING
314 GAL
238 GAL
329 GAL
PHM199-80 40,000 - 199,000 3" 1-1/2"
PHM130-100 35,000 - 130,000 2" 1-1/2"
PHM199-100 40,000 - 199,000 3" 1-1/2"
08/25/14
PHOENIX MULTI FIT WATER HEATER
MODEL* GAL. A B C D E F G H J K L M
PHM130-80/199-80 80 27" 55" 46" 7-1/4" 17" 18-1/4" 8" 3" 46" 38-1/4" 7-1/4" 9-1/2"
PHM130-100/199-100 100 27" 63" 54" 7-1/4" 17" 18-1/4" 8" 3" 54" 38-1/4" 7-1/4" 9-1/2"
L
J
K
A
B
D
C
H
M M
G
E
F
*ALL DIMENSIONS ARE APPROXIMATE, A SUFFIX OF "LP" DENOTES PROPANE GAS
LP-179-B
PHOENIX MULTI FIT WATER HEATER SPECIFICATION
MODEL* INPUT MODULATION
AIR INTAKE/
EXHAUST VENT
SIZE
INLET/
OUTLET
SIZE
AUXILIARY
CONN.
GAS
LINE
CONN.
SYSTEM
RELIEF
PIPE SIZE
SHIPPING
WEIGHT
MAX.
TEMPERATURE
LIMIT
PHM130-80 35,000 - 130,000 2" 1-1/2" NPT 1" FNPT 3/4" 3/4" 235 LBS 160
PHM199-80 40,000 - 199,000 3" 1-1/2" NPT 1" FNPT 3/4" 3/4" 235 LBS. 160
PHM130-100 35,000 - 130,000 2" 1-1/2" NPT 1" FNPT 3/4" 3/4" 405 LBS. 160
PHM199-100 40,000 - 199,000 3" 1-1/2" NPT 1" FNPT 3/4" 3/4" 405 LBS. 160
08/25/14
PHOENIX MULTI FIT WATER HEATER
MODEL* GAL. A B C D E F G H J K L M
PHM130-80/199-80 80 27" 55" 46" 7-1/4" 17" 18-1/4" 8" 3" 46" 38-1/4" 7-1/4" 9-1/2"
PHM130-100/199-100 100 27" 63" 54" 7-1/4" 17" 18-1/4" 8" 3" 54" 38-1/4" 7-1/4" 9-1/2"
L
J
K
A
B
D
C
H
M M
Specifications
Stainless Steel, Gas red
Commercial Water Heater
H
T
P
M
a
d
e
I
n
A
m
e
r
i
c
a
•
H
T
P
M
a
d
e
I
n
A
m
e
r
i
c
a
•
H
T
P
M
a
d
e
I
n
A
m
e
r
i
c
a
•
H
T
P
M
a
d
e
I
n
A
m
e
r
i
c
a
•
SCAQMD Rule 1146.2
Stainless Steel, Gas fired, Commercial Water Heater
Model Gal. A B C D E F G H J K L M
WGCM080NG130/ WGCM080LP130
WGCM080NG199/ WGCM080LP199
80 27” 55” 46” 7 ¼” 17” 18 ¼” 8” 3” 46” 38 ¼” 7 ¼” 9 ½”
WGCM100NG130/ WGCM100LP130
WGCM100NG199/ WGCM100LP199
100 27” 63” 54” 7 ¼” 17” 18 ¼” 8” 3” 54” 38 ¼” 7 ¼” 9 ½”
Stainless Steel, Gas fired, Commercial Water Heater
Model
Input Modulation Vent Size Inlet/Outlet
1st Hr
Rating
Gas Line
System
Relief Pipe
Shipping
Weight
WGCM080NG130/ WGCM080LP130
35,000-130,000 2” 1 ½” NPT 227 Gal. ¾” ¾” 235 Lbs.
WGCM080NG199/ WGCM080LP199
40,000-199,000 3” 1 ½” NPT 314 Gal. ¾” ¾” 235 Lbs.
WGCM100NG130/ WGCM100LP130
35,000-130,000 2” 1 ½” NPT 238 Gal. ¾” ¾” 405 Lbs.
WGCM100NG199/ WGCM100LP199
40,000-199,000 3” 1 ½” NPT 329 Gal. ¾” ¾” 405 Lbs.
*All Dimensions are Approximate, LP denotes Propane Gas
, WESTINGHOUSE are trademarks of Westinghouse Electric Corporation. Used under license by HTP, Inc. All Rights Reserved.
MKTLIT-XX - 01/ 2015
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Westinghouse WGCM080LP130 Quick start guide

Westinghouse
Brand
Westinghouse
Model
WGCM080LP130
Category
Water heaters & boilers
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents