Artec A100TS User manual

Artec
Brand
Artec
Model
A100TS
Category
Audio equalizers
Type
User manual
100W STEREO
ACOUSTIC AMP
A100TS
100W STEREO
ACOUSTIC AMP
A100TS
BLOCK DIAGRAM
GAIN 800Hz150Hz 3.5kHz
POWER
AMP
BASS TREBLE
MASTER
VOLUME
SPEAKER
9kHz
LO-Z
HI-Z
GAIN
CROSS
JACK
PHASE
POWER
AMP
SPEAKER
PHANTOM
POWER
PRE
AMP
PRE
AMP
4 BAND EQUALIZER
EQUALIZER
INV
ACOUSTIC
TONE
MODELLER
ACOUSTIC
TONE
MODELLER
STEREO
LINE
SWITCH
Ch A / B
Separate
DSP
EFFECT
UNIT
MERGED
LINE OUT
(BEFORE FX)
FX FOOT SW
DI
DRIVER
DI
DRIVER
SEPARATED
LINE OUT
(AFTER FX)
PIEZO
LO-Z
HI-Z
PIEZO PHANTOM
PROGRAM
LEVEL
CH. A
CH. B
CONFIGURATIONS
Ch. A
GUITAR SOUND
with DSP EFFECT
DSP EFFECT
Ch. separate
ON
DSP LEVEL : MAX
1 Guitar, 1 Pickup, DSP Stereo Setting
Ch. A
GUITAR SOUND
with DSP EFFECT
Ch. separate OFF
1 Guitar, 1 Pickup, POWER Setting
GUITAR SOUND
with DSP EFFECT
Monaural guitar sound
with Stereo DSP effect
Deep stereo effect
Ch. A
Ch. A
GUITAR SOUND
with DSP EFFECT
2 Guitars Setting
Ch. B
GUITAR SOUND
with DSP EFFECT
Monaural guitar sound
with Stereo DSP effect
Ch. B
XLR
GUITAR SOUND
with DSP EFFECT
Ch. separate
OFF
Natural Guitars Setting
GUITAR SOUND
with DSP EFFECT
Natural guitar sound
with Stereo DSP effect
Ch. B
Notice: Feedback and howling
Ch. separate
ON
Ch. A
CH. A
PIEZO SOUND
with DSP EFFECT
1 Guitar, 2 Pickup, Stereo Setting
Ch. B
CH. B
SOUNDHOLE
PICKUP SOUND
with DSP EFFECT
Ch. A
1 Guitar, 2 Pickup, Stereo Setting
with stereo plug
STEREO PLUG
CH. A
PIEZO SOUND
with DSP EFFECT
CH. B
SOUNDHOLE
PICKUP SOUND
with DSP EFFECT
piezo
Soundhole
When plug to Ch.B,
Speaker assign
will be reversed
True stereo sound True stereo sound
XLR
Ch. A
GUITAR SOUND
with DSP EFFECT
Small Concert Setting
Ch. B
VOCAL SOUND
with DSP EFFECT
Stereo DSP effect
Ch. B
Notice: Feedback and howling
Ch. A
VOCAL
Ch. A
GUITAR SOUND
with BGM
Ch. separate
OFF
BGM Concert Setting
Ch. B
GUITAR SOUND
with BGM
Stereo DSP effect
Ch. B
Notice: Feedback and howling
Ch. A
BACKGROUND MUSIC
Ch. separate
ON
Ch. separate
ON
Ch. separate
ON
SPECIFICATION
DIMENSION : 390 x 305 x 460 (mm)
SPEAKER : 4 x 5 inch Acoustic Speaker
OUTPUT : 100 watts music power
AC POWER : 200W @ 230V
FREQUENCY RANGE : 50Hz ~ 12kHz
DIMENSION (H x W x D)
390 x 305 x 460
Ch. B
TWO 5 inch
Acoustic
Speaker
Ch. A
TWO 5 inch
Acoustic
Speaker
Sound Reflex Slot
True-Stereo Wedge Angle Design
CH.A
1/4” INPUT
HI-Z : 5Mohm
LO-Z MODE : 3kohm
Max input level : +10dBV
Max gain : 60dB
EQ
150Hz (-10dB ~ +10dB)
800Hz (-10dB ~ +10dB)
3.5kHz (-10dB ~ +10dB)
9kHz (-10dB ~ +10dB)
CH.B
1/4” INPUT
HI-Z : 5Mohm
LO-Z MODE : 3kohm
XLR INPUT
LO-Z : 4kohm (48V phantom)
Max input level : +10dBV
Max gain : 60dB
EQ
BASS 150Hz (-10dB ~ +10dB)
TREBLE 4kHz (-10dB ~ +10dB)
DSP EFFECTS
1 Hall
2 Cathedral
3 Room 1
4 Room 2
5 Room 3
6 Chamber
12 Delay/Reverb
STEREO REVERB MODE
CHANNEL SEPARATED MODE
7 Rotary
8 Chorus 1
9 Chorus 2
10 Flanger
11 Vib
When use one channel at
separate mode, STEREO FX
makes effect sound to the
other channel. It can makes
deep stereo effect.
When use these separated fx,
SEPARATE switch ‘OFF’ is
recommended to use both
output channel.
FX
LEVEL
CH1
CH2
CH1
INPUT
CH2
CH1
OUTPUT
CH2
STEREO REVERB
FOOT SW
CH SEPARATED FX
FX
LEVEL
CH1
CH2
CH1
INPUT
CH2
CH1
OUTPUT
CH2
FOOT SW
4 BAND EQUALIZER
POWER
INDICATOR
when another jack
is unplugged
STEREO CROSS-JACK
TM
for stereo acoustic guitar
ex: piezo and magnetic
soundhole pickup
INPUT CLIP INDICATOR
PIEZO MODE (HI-Z)
INDICATOR & SWITCH
2 BAND EQUALIZER
Ch.A Phase Reverse
Switch for Anti feedback
Ch. A and Ch.B
Separate Switch
and indicator
DSP EFFECTS
PROGRAM SELECTOR
1~6 : Reverbs
7~12 : Chorus, Flanger, Delay
LEVEL CONTROL
of DSP EFFECTS
MASTER
VOLUME
PHANTOM POWER
Switch & indicator (only XLR)
Ch.B XLR
balanced input
GAIN CONTROL
GAIN CONTROL
CONTROL PANEL (TOP)
CONTROL PANEL (REAR)
BALANCED LINE-OUT
(AFTER DSP EFFECTS)
UNBALANCED LINE-OUT
(TWO CH. MERGED,
BEFORE EFFECTS)
EFFECTS ON/OF
FOOT SWITCH
POWER SWITCH
FUSE
AC CABLE
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFETY INSTRUCTIONS
- DO NOT OPERATE NEAR ANY HEAT SOURCE AND DO NOT BLOCK ANY VENTILATION OPENINGS ON THIS APPARATUS.
- ONLY CONNECT POWER CORD TO A POLARIZED, SAFETY GROUNDED OUTLET WIRED TO CURRENT ELECTRICAL CODES
AND COMPATIBLE WITH VOLTAGE, POWER, AND FREQUENCY REQUIREMENTS STATED ON THE REAR PANEL OF THE
APPARATUS.
- ONLY USE ATTACHMENTS, ACCESSORIES, STANDS, OR BRACKETS SPECIFIED BY THE MANUFACTURER FOR SAFE
OPERATION AND TO AVOID INJURY.
- WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
- SERVICE MUST BE PERFORMED BY QUALIFIED PERSONNEL.
- OUR AMPLIFIERS ARE CAPABLE OF PRODUCING HIGH SOUND PRESSURE LEVELS. CONTINUED EXPOSURE TO HIGH
SOUND PRESSURE LEVELS CAN CAUSE PERMANENT HEARING IMPAIRMENT OR LOSS. USER CAUTION IS ADVISED AND
EAR PROTECTION IS RECOMMENDED IF UNIT IS OPERATED AT HIGH VOLUME.
A PRODUCT OF ARTECSOUND CO., LTD. KOREA MADE IN CHINA
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Artec A100TS User manual

Artec
Brand
Artec
Model
A100TS
Category
Audio equalizers
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents