LST LAT288-1 User manual

Category
Wall & ceiling mounts accessories
Type
User manual

This manual is also suitable for

LST LAT288-1 is a signaling device that can be used to display events from a fire detection or extinguishing control panel. It can accommodate up to 3 LED Display Fields LAB48 with up to 144 LED pairs. The LED pairs are actuated through the Remote Tableau Drive Unit PTU288-1, which is connected to the control panel via the INFO bus. The buzzer of the drive unit signals the alarm or fault condition of the control panel. The LED Display Tableau Housing LAT288-1 can also accommodate optional componentry, such as relay modules, and up to 2 stand-by batteries 12V/max. 22Ah.

LST LAT288-1 is a signaling device that can be used to display events from a fire detection or extinguishing control panel. It can accommodate up to 3 LED Display Fields LAB48 with up to 144 LED pairs. The LED pairs are actuated through the Remote Tableau Drive Unit PTU288-1, which is connected to the control panel via the INFO bus. The buzzer of the drive unit signals the alarm or fault condition of the control panel. The LED Display Tableau Housing LAT288-1 can also accommodate optional componentry, such as relay modules, and up to 2 stand-by batteries 12V/max. 22Ah.

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED
LAT288_DBL_LST_EN_0804.PDF • PAGE 1
ABuilding Safety. Building Security.
LED Display Tableau Housing
LAT288-1, LAT288-1CE
Description
The LED Display Tableau Housing LAT288 allows for the
design of a display for optically signalling the events of
a Fire Detection Control Panel Series BC216 or BC016,
or of an Extinguishing Control Panel Series LC216, by
using freely parameterisable LED pairs.
The LED pairs are actuated through the Remote Tableau
Drive Unit PTU288-1, which is connected to the control
panel via the INFO bus. The buzzer of the drive unit sig-
nals the alarm or fault condition of the control panel.
The LED display tableau housing is available in two dif-
ferent versions: The LAT288-1 is a wall housing and the
LAT288-1CE is used for mounting in a 19“ rack.
The tableau housings can accommodate the Remote
Tableau Drive Unit PTU288-1 and up to 3 LED Display
Fields LAB48. In the LED Display Tableau Housing
LAT288-1, further optional componentry, e.g., relay mo-
dules, as well as up to 2 stand-by batteries 12V/max.
22Ah can be installed.
The frontal area of the LED display tableau housing is
designed in the same style as the Fire Detection Cont-
rol Panel Series BC216. It is covered with a light grey
plastic foil with six integrated windows. These windows
allow to comfortably insert labeling strips, which iden-
tify the LED pairs.
Allows for design of displays for the
signalling of events of a fi re detection
or extinguishing control panel
Can accommodate 3 LED Display
Fields LAB48 with up to 144 LED
pairs
Wall housing or 19“ rack version
available
Clear designation of the LED pairs by
means of insertable labeling strips
Specifi cations
Colour housing grey white, RAL 9002
Colour front foil light grey, RAL 7035
LED Display Tableau LAT288-1
Dimensions W × H × D 420 × 520 × 120 (mm)
Weight 6.2kg (without optional componentry)
Order number 252010
Order name LED Display Tableau LAT288-1
LED Display Tableau LAT288-1CE
Dimensions W × H × D 478 × 266 (6 height units) × 55 (mm) (incl. PTU288-1 and LAB48)
Weight approx. 1.6kg (without optional componentry)
Order number 252011
Order name LED Display Tableau LAT288-1CE
  • Page 1 1

LST LAT288-1 User manual

Category
Wall & ceiling mounts accessories
Type
User manual
This manual is also suitable for

LST LAT288-1 is a signaling device that can be used to display events from a fire detection or extinguishing control panel. It can accommodate up to 3 LED Display Fields LAB48 with up to 144 LED pairs. The LED pairs are actuated through the Remote Tableau Drive Unit PTU288-1, which is connected to the control panel via the INFO bus. The buzzer of the drive unit signals the alarm or fault condition of the control panel. The LED Display Tableau Housing LAT288-1 can also accommodate optional componentry, such as relay modules, and up to 2 stand-by batteries 12V/max. 22Ah.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI