Lightolier 6033 User manual

Lightolier
Brand
Lightolier
Model
6033
Category
Motorcycle Accessories
Type
User manual

This manual is also suitable for

Lightolier Lytespan 6033 is a versatile track lighting system that offers a range of features for customized lighting solutions. It allows for direct mounting to surfaces or 4" octagonal outlet boxes, making it suitable for various applications. Additionally, it can be connected to Basic Plain track units and mounted to grid ceiling runners or stem-mounted Basic track, providing flexibility in installation. The system's wire cover is made of durable plastic polycarbonate, while the mounting plate is constructed from galvanized steel for added strength.

Lightolier Lytespan 6033 is a versatile track lighting system that offers a range of features for customized lighting solutions. It allows for direct mounting to surfaces or 4" octagonal outlet boxes, making it suitable for various applications. Additionally, it can be connected to Basic Plain track units and mounted to grid ceiling runners or stem-mounted Basic track, providing flexibility in installation. The system's wire cover is made of durable plastic polycarbonate, while the mounting plate is constructed from galvanized steel for added strength.

Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2008 Genlyte Group LLC • E0108
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lytespan
®
Track Lighting System 6033
Page 1 of 1 Basic
®
In-Line PowerTrip™ Kit
Ordering Information
Catalog No. Finish Mounting Compatible Plug-In Breakers
6033WH Matte White Mounts directly to surface or to a 4” octagonal Compatible with PLD powerbreakers.
6033BK Matte Black outlet box. Connects to Basic Plain track units. Refer to PLD120 spec sheet.
Suitable for mounting to grid ceiling runners. Ordered Separately
Can be used with stem mounted Basic track.
Features
1. Wire Cover: Plastic Polycarbonate.
2. Mounting Plate: .075 thick galvanized steel.
3. Round Knock Out: (2) 7/8 dia. knockouts for electrical feed. (1) or (2) circuits
can be fed into connector. Offset to accomodate grid ceiling runners.
4. Ground Terminals: (2) ground terminals.
5. Rectangular Knock Out: Allows feeding from j-box with proper UL area for
splice inspection without removing connector from j-box.
6. Mounting Holes: (4) holes on 3.5 in. centers secure connector to j-box or
mounting surface.
7. Track Connector Screw Terminals: Each terminal accepts (2) 12 or 14 ga.
copper feed wires.
8. Basic Track Connector: (2) assemblies keyed to maintain proper polarity
with track. Installs into track providing electrical and mechanical connection.
9. Circuit Breaker: (Sold Separately). One or two can be installed. Limits the
amount of electrical load that can be placed on the circuit. Can be used as
standard On/Off switch.
10. Cover Mounting Screws: Pin Torx head steel screws secure plastic cover
plate. Color matches fixture color.
11. Electrical Wires: Two 12 ga. jumper wires are installed by factory. The
wires can be removed for alternate wiring scheme.
12. Tamperproof Locking Screw: (2) Mechanically secures connector into
track. Color matches fixture color.
Electrical
Capacity is 120 volts, 60Hz. All Lytespan Track luminaires are polarized and
continuously grounded throughout. Electrical conductors are concealed in an
insulating liner. Intended for wiring to branch circuit building wire with ground.
All wiring must be in accordance with National and Local Codes.
Labels
U.L. listed.
Note: to assure full complaince with local energy codes and regulations
check with your local code official.
  • Page 1 1

Lightolier 6033 User manual

Lightolier
Brand
Lightolier
Model
6033
Category
Motorcycle Accessories
Type
User manual
This manual is also suitable for

Lightolier Lytespan 6033 is a versatile track lighting system that offers a range of features for customized lighting solutions. It allows for direct mounting to surfaces or 4" octagonal outlet boxes, making it suitable for various applications. Additionally, it can be connected to Basic Plain track units and mounted to grid ceiling runners or stem-mounted Basic track, providing flexibility in installation. The system's wire cover is made of durable plastic polycarbonate, while the mounting plate is constructed from galvanized steel for added strength.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers