Little Wonder Double Edge User manual

Brand: Little Wonder

Model: Double Edge

Category: Cordless hedge trimmers

Type: User manual

Little Wonder Double Edge is a powerful and versatile hedge trimmer that is perfect for both residential and commercial use. With its 21.22cc commercial-grade engine, it can easily cut through branches up to 1" in diameter. The double-reciprocating blades and blade speed of 4100 cuts per minute ensure a clean, precise cut.

The Little Wonder Double Edge is also designed for comfort and ease of use. The ergonomic handle and anti-vibration shock mounts reduce fatigue, even during extended use. The lower profile design and front loop handle allow you to operate the trimmer from a variety of positions, making it easy to reach even the most difficult areas.

Safety comb

Double recipr

Reliable starting and performance

Gears designed for more power

Throttle features

Lower profile design

Model Number

Blade Length (inches)

Double-Edge Blade

Weight (pounds) approx.

Blade Speed

Warranty

Engine

2119

✔

11.7

5 YEAR COM

Professionals Demand Little W

A more user-friendly loop handle

assures operator comfort in a

variety of positions.

Designed for added

user comfort

21.22cc commercial grade engine

Built in centrifugal clutch

Cuts up to 1" diameter growth

Push Bulb Priming

Anti-Vibration

Shock Mounts

Ergonomic Handle

Specifications

Cuts up to 1 inch

diameter growth

10% lighter, 20% faster - The redesigned, reengineered Double Edge Gas

Hedge Trimmers are faster and lighter than previous models.This translates to

better performance, lowered user fatigue, and higher profits!

Lower profile design - The overall lowering of the engine profile allows the

user to use the unit comfortably in many different positions.

Superior blade design - Stamped, thru-hardened high carbon tool steel blades

maintain a sharp edge longer.This means less downtime for maintenance. Little

Wonder blades last much longer than other blades.

Double reciprocating blades - Most hedge trimmers feature only one set of

blades that move. Little Wonder Gas Hedge Trimmers feature double

reciprocating blades for reduced vibration and neater cuts.

Cuts up to 1" diameter growth - Our hand straightened blades enable you to

easily shear new growth, as well as established heavy growth.

Anti-vibration shock mounts - Increase user comfort over longer jobs.

Gears designed for more power - Case hardened steel gears for durability and

longer life. Rear handle mount accepts support from frame bar.

Frame bar - Designed to be the strongest in the industry, without any

unnecessary weight.

21.22cc commercial grade engine - For extended engine life.Two large ball

bearings where the crankshaft connects to the block and a high quality needle

bearing on the connecting rod ensures cooler operation. Also features

electronic ignition, chrome lined cylinder, and two ring piston.

Built in centrifugal clutch - Engages blades only when engine goes above idle

speed; reduces possible damage to gears if cutter bar ever jams.

Reliable starting and performance - Engine features electronic ignition and

primer bulb carburetor for easy starts, a weighted fuel line so that the unit can

operate in any position. C.A.R.B. certified.

Designed for added user comfort - Shock mounts in handles reduce vibration,

and the precision balanced design make these units easier to use over

extended periods.

Throttle features - Finger throttle control and lock out lever give the user

enhanced engine and blade control to prevent inadvertent blade engagement.

Safety comb - Holds thick growth longer for superior cutting performance, and

reduces the risk of injury.

rocating blades

Superior blade design

2124

✔

12.2

2130

✔

12.9

4100 CUTS PER MINUTE

MMERCIAL / 5 YEAR CONSUMER

21.2 CC,COMMERCIAL GRADE

Most hedge trimmers (left) feature

only one set of blades that move. Little

Wonder Gas Hedge Trimmers (right)

feature double reciprocating blades for

less vibration and manicured results.

Wonder. Shouldn’t You?

Moving

Features & Benefits

Redesigned for Greater Performance and Profitability

At Little Wonder, we strive to surpass the demands of

the landscaping professional. As operating costs

continue to increase, the tools of the business have to

become more efficient. Our new Double Edge Gas

Hedge Trimmer design does just that!

It has been redesigned to be 10% lighter, and 20%

faster than previous models.This means you can use

it longer, and achieve greater results.

With a blade speed of 4100 cuts per minute, double

reciprocating blades, and a dual cutting motion, this

hedge trimmer performs faster than any of our

previous models.

The new front loop handle allows the user to operate

the hedge trimmer from many different positions.

And, the lowered profile also makes it easy to reach

over the engine.These features guarantee a superior

cutting tool.

The Double Edge Hedge Trimmer is available in 19",

24", and 30" models to suit the needs of every

landscaping job.

Professionals Demand Little Wonder. Shouldn’t You?

1028 Street Road • Southampton PA 18966

Toll Free: 1-877-596-6337

Fax: (215) 357-8045

www.littlewonder.com

Local Dealer is:

Little Wonder Double Edge User manual

Brand: Little Wonder

Model: Double Edge

Category: Cordless hedge trimmers

Type: User manual

Download PDF

report

Little Wonder Double Edge User manual

Little Wonder Double Edge User manual

Related papers

Other documents