4. Fix a guide to the holes in the side of the appliance door.
Insert a slider into the guide then fully open and close the
appliance and cabinet doors together to check that the cabinet
door can be fully opened and closed.
Slider
Screws
8. Fit the four guides onto the sliders and then fix them to
the sides of the appliance doors. Fit the guide covers onto the guides.
5. Open the appliance and cabinet doors together and mark
the position of the slider (Approx. 2cm in from the edge of the
cabinet door), such that the slider engages with the guide
when the door is opened and closed. Take the slider out of
the guide and fix the slider to the cabinet door with 2 screws.
Then fix the slider cover onto the slider.
6. Unscrew the guide from the appliance door.
7. Repeat steps 4 to 6 to fix the other three sliders and covers
to the cabinet doors.
10. Fix the top bracket of the appliance to the cabinet.
11. Insert the rubber seal into the gap between
the appliance and the cabinet, at the door opening side.
12. Fix the middle bracket to the side of the cabinet. Clip the
middle bracket cover onto the bracket.
')
')
Installation Instructions (Cont'd)
9. Double check that the doors can open and close
smoothly and that the appliance doors seal properly.
If not, slightly adjust the unit. Fix the bottom bracket
of the appliance to the cabinet.
