Chief Manufacturing FHB3032 User manual

Chief Manufacturing
Brand
Chief Manufacturing
Model
FHB3032
Category
Flat panel accessories
Type
User manual

Chief Manufacturing FHB3032

The Chief Manufacturing FHB3032 is a fusion extender bracket designed to provide additional support and flexibility when mounting displays. It is compatible with Chief Fusion uprights and can be used to extend the distance between the display and the wall or other mounting surface.

The FHB3032 is made from durable steel and has a weight capacity of 75 lbs (34 kg). It features four 5/16"-18" hex nuts and four flat washers for easy installation. The bracket also has a variety of mounting holes that allow it to be used in a variety of applications.

Chief Manufacturing FHB3032

The Chief Manufacturing FHB3032 is a fusion extender bracket designed to provide additional support and flexibility when mounting displays. It is compatible with Chief Fusion uprights and can be used to extend the distance between the display and the wall or other mounting surface.

The FHB3032 is made from durable steel and has a weight capacity of 75 lbs (34 kg). It features four 5/16"-18" hex nuts and four flat washers for easy installation. The bracket also has a variety of mounting holes that allow it to be used in a variety of applications.

INSTALLATION INSTRUCTIONS
Fusion Extender Bracket
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
FHB3032
FHB3032 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component. The wall to which the mount is being attached
may have a maximum drywall thickness of 5/8" (1.6cm). Do
not install drywall anchors into the seam between drywall
pieces.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the maximum weight
installed on the interface bracket doesn’t exceed 75 lbs
(34 kg).
DIMENSIONS
16.75 425.4
8X 1.06 27
.34
8.6
.61
15.4
1.92
48.8
.00
.45
50
2.42 61.5
3.94 100
4
.39 111.5
5.91 150
6
.36 161.5
7.87 200
.45 11.5
1.97 50
2.42 61.5
3.94 100
4
.39 111.5
5.91 150
6
.36 161.5
7.87 200
90.6
.41
10.3
Installation Instructions FHB3032
3
TOOLS / PARTS FOR INSTALLATION
ASSEMBLY AND INSTALLATION
1. Use four 5/16-18" hex nuts (B) and four flat washers (C) to
connect Fusion uprights to extender brackets (A). (See
Figure 1)
Figure 1
2. Lay display face down on a soft surface.
3. Use four M6x16mm Phillips machine screws (included with
mount) to attach extender brackets (A) to display. (See
Figure 2)
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the maximum weight
installed on the interface bracket doesn’t exceed 75 lbs
(34 kg).
Figure 2
4. Complete the installation following the mount installation
instructions.
A (2)
[Extender
Bracket]
B (4)
5/16-18"
C (4)
5/16"
1
(B) x 4
(A) x 2
(C) x 4
3
x 4
(A) x 2
FHB3032 Installation Instructions
USA/International A 6436 City West Parkway, Eden Prairie, MN 55344
P 800.582.6480 / 952.225.6000
F 877.894.6918 / 952.894.6918
Europe A Franklinstraat 14, 6003 DK Weert, Netherlands
P +31 (0) 495 580 852
F +31 (0) 495 580 845
Asia Pacific A Office No. 1 on 12/F, Shatin Galleria
18-24 Shan Mei Street
Fotan, Shatin, Hong Kong
P 852 2145 4099
F 852 2145 4477
Chief, a products division of
Milestone AV Technologies
8800-002541 Rev00
2014 Milestone AV Technologies
www.chiefmfg.com
02/14
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Chief Manufacturing FHB3032 User manual

Chief Manufacturing
Brand
Chief Manufacturing
Model
FHB3032
Category
Flat panel accessories
Type
User manual

Chief Manufacturing FHB3032

The Chief Manufacturing FHB3032 is a fusion extender bracket designed to provide additional support and flexibility when mounting displays. It is compatible with Chief Fusion uprights and can be used to extend the distance between the display and the wall or other mounting surface.

The FHB3032 is made from durable steel and has a weight capacity of 75 lbs (34 kg). It features four 5/16"-18" hex nuts and four flat washers for easy installation. The bracket also has a variety of mounting holes that allow it to be used in a variety of applications.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents