New Transducers 42PF9830/10 User manual

Brand: New Transducers

Model: 42PF9830/10

Category: LCD TVs

Type: User manual

Contents

Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

First time installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

To operate the motorised swivel . . . . . . . . . . . . . . . . . . . . . . . . . 3

Keys at the top of the TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Use of the remote control RC4310 . . . . . . . . . . . . . . . . . . . . . . . 4

Browse screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

To use the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

How to navigate through the Settings menus . . . . . . . . . . . . . . . . . . . 7

Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Installation

Select the menu language and country . . . . . . . . . . . . . . . . . . . . . . . . 8

Store TV channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Software upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Setup menu

Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

TV menu

Picture menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Sound menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Features menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Ambilight menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Multimedia Browser

Viewing content from a Memory card / USB device . . . . . . . . . . . . . 19

Multimedia Browser menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Teletext menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Equipment to connect to the side connections . . . . . . . . . . . . . 22

Connect Peripheral Equipment . . . . . . . . . . . . . . . . . . . . . . . . . 23

Recorder (vcr-dvd+rw) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Recorder and other equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

DVD Player or other peripheral digital source equipment . . . . . . . . . 26

MultiChannel Surround receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Devices to connect to a HDMI connector . . . . . . . . . . . . . . . . . . . . 28

Devices to connect to a DVI connector . . . . . . . . . . . . . . . . . . . . . . 29

Record with your recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

To select connected equipment . . . . . . . . . . . . . . . . . . . . . . . . . 30

Audio- and video equipment keys . . . . . . . . . . . . . . . . . . . . . . . 31

Setting the remote control to work peripheral equipment

Code setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

To cancel the selected mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Learnable remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Annex 1 - Philips TV software upgrade with portable memory . 37

Annex 2 - Philips TV Slideshow Format with background music. 39

Annex 3 - Philips TV - Portable Memory and USB . . . . . . . . . . 41

R End of life directives

Philips is paying a lot of attention to

producing environmentally-friendly in green

focal areas.Your new TV contains materials

which can be recycled and reused. At the

end of its life specialised companies can

dismantle the discarded TV to concentrate

the reusable materials and to minimise the

amount of materials to be disposed of.

Please ensure you dispose of your old TV

according to local regulations.

Help?

If this instruction manual does not give

an answer or if ‘Tips’ does not solve your

TV problem, you can call your Local

Philips Customer or Service Centre. See

the supplied World-wide guarantee

booklet.

Please, have the Model and Product

number which you can find at the back

of your television set or on the packaging,

ready, before calling the Philips helpline.

Model: 42PF9830/10

Product No: ...........................................

Care of the screen

See p. 3.

English

EasyLink features are based on the “one touch operation” approach.This

means that a sequence of actions are executed at the same time in both the

television and the recorder, provided both are fitted with the EasyLink function

and connected with the eurocable supplied with your recorder.

NXT

is a trademark of New Transducers Limited

The first time (and only the first time) you switch on your set, you see an installation introduction screen.

The installation procedure consists of a series of screens that guide you through the process.

& After an introduction screen, you are asked to select a language of the TV’s on-screen-menus. (The text of the header and the info on screen

continuously change language.)

é Press the cursor up/down to highlight your language.

“ Press the OK key.

‘ Follow the instructions on screen to proceed.

Note: Once you completed the initial installation procedure, you may access the screens from the Settings menu. See p. 8.

Do not insert the power plug in a wall socket or hang the TV to the wall

before all connections are made.

& Wall mounting instructions/Table stand/Motorised swivel

How to mount the supplied stand and/or wall mount bracket and the

swivel, see the supplied separate Quick Start Guide.

Caution: Installing the TV requires special skills that should only be

performed by qualified personnel.You should not attempt to do the work

yourself. Philips bears no responsibility for improper mounting or mounting

that results in accident or injury.

Using the supplied bracket to mount the TV:

-You can ask a qualified service personnel about using the bracket to

mount the display on the wall.

-Follow the instructions that come with the bracket before beginning

work.

- Make sure that the wall mount is being fixed securely enough so that it

meets safety standards.The weight of the TV (excl. packaging) is about

42 kg.

é Place or hang the TV wherever you want, but make sure that air can

circulate freely through the ventilation slots. Do not install the TV in a

confined space such as a book case or a similar unit.

To prevent any unsafe situations, no naked flame sources, such as lighted

candles, should be placed in the vicinity. Avoid heat, direct sunlight and

exposure to rain or water.

The equipment shall not be exposed to dripping or splashing.

First time installation

Safety warnings

Switch the TV on

Remote control

Press the power switch B at the top of the TV.

An indicator on the front of the TV lights up and the screen comes on. If

the TV is in standby mode, press the

-P+ keys or the B key on the remote

control.

Insert the 2 batteries supplied (Type R6-1,5V).

The batteries supplied do not contain the heavy metals mercury and cadmium.

Please check on how to dispose of exhausted batteries according to local

regulations.

Make your connections

& Insert the aerial plug firmly into the aerial socket x at the bottom of the

TV. For best picture quality use the suppressor-aerial cable supplied.

é Before installing your TV, connect all your peripheral equipment.

“ Insert the mains cord supplied into the mains at the bottom of the TV and

in the wall socket having a mains voltage of 198-264V.

To prevent damaging the power (AC) cord which could cause a fire or

electric shock, do not place the TV on the cord.

UK - EIRE

DVD/R TV VCR AUX

123

SELECT

DEMO

ABC DEF

SAT

BROWSE

MOT

The motorised swivel can turn + and - 30 degrees and can be operated

with the remote control of your TV. Manual rotation remains possible too.

Preparation

& Insert the DC cable of the swivel transformer into the DC input of the

swivel.

é Insert the power cord to the swivel transformer.

“ Insert the mains plug of the swivel transformer in the wall socket.

Operation

First press the

SWIVEL MOT key at the side of your remote control and

keep it pressed.

Then simultaneously:

-press the cursor left/right to rotate the swivel in the direction of the

command;

-press the the cursor down to bring the swivel in a central position;

-press the cursor up to return the swivel to the last selected position.

Note: After a power drop or a power cord plug out, adjust the swivel position with

the cursor left/right.

Automatic positioning to central position

Press the B key for at least 5 seconds to switch off your TV and to turn

the swivel to its central position.

Care of the screen

Do not touch, push or rub or strike the screen with anything hard as this may scratch, mar or damage the screen permanently.

And please do not rub with dust clothes with chemical treatment.

Do not touch the surface with bare hands or greasy cloth (some cosmetics are detrimental to the screen).

Unplug the TV before cleaning the screen.

When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like chamois soaks.

Do not use acetone, toluene and alcohol because they cause chemical damage.

Do not use liquid cleaners or aerosol cleaners.

Wipe off saliva or water drops as soon as possible.Their long time contact with the screen causes deformations and colour fading.

To operate the motorised swivel

Should your remote be lost or broken you can still change some of the basic

settings with the keys on the top of your TV.

Press the power switch B to switch the TV on.

Press:

• the V - or + keys to adjust the volume;

• the

P/CH - or + keys to select the TV channels or sources.

The

MENU key can be used to summon the Settings menu without the remote

control.

Use:

• the V - and + keys and the

P/CH œ and P/CH o keys to select menu

items;

• the

MENU key to confirm your selection.

Note:

When activated via the

MENU key on top of the TV, only Exit lets you dismiss the

menu.

Navigate to

Exit, press the cursor right and then press the MENU key.

MENU P/CHV

Keys at the top of the TV

Note: For most keys pressing a key once will activate the function. Pressing a second time will de-activate it.

When a key enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list.The list will be removed

automatically after 6 seconds or press

OK to remove immediately.

TUVPQRS WXYZ

JKLGHI MNO

ABC DEF

✓

MODEON/OFF

Ambilight

DVD/R SAT TV VCR AUX

123

456

789

‡

†

VIEW

- FAVORITES -

SELECT

DEMO

BROWSE

MOT

B Standby

Press to switch the TV on or off from or to

standby mode.

When switched to standby, a red indicator

on the TV lights up.

Note: the TV is never powered off completely

unless it is physically unplugged.

DVD/R SAT TV VCR AUX

Press the SELECT key repeatedly to

select one of the system modes in

which the remote control can be used.

If no action is being undertaken within

60 seconds, the remote control

returns to TV mode.

After an action in the selected system

mode the remote control will remain

in this mode for 60 seconds and will

then return to TV mode.

v Select connected equipment

Press and hold this key until the

source indication appears, then press

repeatedly to select

EXT1, EXT2,

EXT3, EXT4, DVI, HDMI, Side or TV,

according to where you connected your

peripheral equipment.

= BROWSE On/Off

Press to display the Browse menu On or

Off. See p. 6.

OK • to activate a setting

• to display the channel list

• starts playing content in the Multimedia

Browser application, p. 20.

(MOT) SWIVEL key

To control the motorised swivel in

combination with the cursor keys.

See p. 3.

Settings menu on/off

See p. 8.

V Volume

Press + or - to adjust the volume.

¬ Interrupt the sound or restore it.

Alphanumeric keys

To select a TV channel. See p. 6.

i Display information

Press to display (when available)

information about the selected TV

channel and programme.

®Ò‡†ºπ

• Audio and Video equipment keys.

See p. 31.

• Multimedia browser functional keys.

See p. 20.

DEMO Demo on/off See p. 7

Colour keys

When functions are attached to the

colour keys, the colour keys show on

screen.

k Teletext index page See p. 21.

b Teletext On/Off See p. 21.

Cursor keys

Press the cursor keys up/down, left/right

to navigate through the menus.

+P- Channel selection

To browse through the TV channels

and sources stored in the preferred

channels list.

0 Previous programme

Press to alternate between the currently

viewed and the previously viewed TV

channel.

AMBILIGHT

• ON/OFF

Press to switch Ambilight On or Off.

For the Ambilight settings, see TV

menus,Ambilight, p. 18.

•

MODE

Press this key repeatedly to toggle

through the Ambilight modes.

® Instant record

See Record with your recorder with

EasyLink, p. 30.

FAVORITES

• VIEW To display a list of all channels

marked as favourite.

• ✓ To add or remove a channel in the

favourite list of TV channels.

Use of the remote control RC4310

✓

MODEON/OFF

Ambilight

DVD/R TV VCR AUX

123

456

789

‡

†

VIEW

- FAVORITES -

SELECT

DEMO

SAT

BROWSE

MOT

TUVPQRS WXYZ

JKLGHI MNO

ABC

DEF

q Picture format

Press this key repeatedly to select another picture format:Auto format, Super

zoom, 4:3, Movie Expand 14:9, Movie Expand 16:9, Subtitle zoom or Wide screen.

Auto format makes the picture fill the screen as much as possible.

In case of subtitles in the bottom black bar,Auto format makes the subtitles

visible. In case of a broadcaster logo in the corner of the top black bar, the logo

disappears from the screen.

Super zoom removes the black bars on the sides of 4:3 programmes with minimal

distortion.

When in Movie Expand 14:9, Movie Expand 16:9, Super zoom or Subtitle zoom

picture format, you can make subtitles visible with the cursor up/down.

Note: With HD sources not all screen formats will be available.

Auto format Super zoom 4:3 Movie expand 14:9

Movie expand 16:9 Subtitle zoom Wide screen

b Dual screen/PIP

Press the b key to switch on or off Dual screen or PIP, according to the format

selection made in the

PIP format list in the Setup, Preferences/Picture/sound

preferences menu, p. 11.

PIP allows you to call up a subscreen within the main screen enabling you to

watch two TV channels or a TV channel and pictures from a peripheral at the

same time.

Dual screen allows you to divide the main screen into two subscreens enabling

two TV channels or a TV channel and an external source or a combination of one

of them with Teletext (see p. 21) to be watched simultaneously.

Note: Not all combinations might be possible. In such a case a message appears on the

screen.

& Press the cursor left/right to highlight the PIP window or the left/right screen

in Dual screen

é Press the -P+ key or the v key or the digit keys in order to change TV

channels, external sources or teletext pages in the highlighted screen.

Note: on screen information, which appears when changing channels, always

refers to the highlighted screen.

“ Press the b key again to return to a full main screen picture.The TV tunes

to the picture which was highlighted in the Dual screen or PIP mode.

Notes:

- Audio only plays from the main, when PIP has been selected, or from the left

screen, when Dual screen has been selected.

- When in Dual screen, two display formats are supported: full screen or

squeezed.

Multimedia browser content will always be displayed full screen.

- When PIP or Dual screen mode is activated, and a TV channel or source is

locked, the picture is grayed out.

Define the position of the PIP screen

& Press the cursor right to highlight the PIP screen.

é Press the red colour key on the remote control to select Position.

Note: If no action has been undertaken, the function bar at the bottom of the

screen will disappear after a few seconds. Press any colour key to make it re-appear.

“ Use the cursor keys to define the position of the PIP screen.

The Browse screen (and the underlying Multimedia content browser) is

intended to contain all content, applications you are interested to consume.

If you want to connect your TV to a PC or home network, see the supplied

separate Connected Planet guide for further explanation of this functionality.

& Press the = key to activate.

é Press the cursor up/down to move the highlight up and down in the list of

menu items.

“ Press the cursor right to go deeper into the structure.

•Television:

TV channels leading to the list of TV channels.

•Multimedia:

Contains the devices (PC and locally connected devices like USBs or

memory cards) on which content (pictures, video and audio files) is stored.

See Multimedia browser, p. 19.

Alphanumeric keys on the remote control

The alphanumeric keys on the remote control can be used to enter digits

and text.

Multi-tap entry can be used to enter alphanumeric information when

necessary.The characters displayed are dependent on the language selected

in the Installation menu. See p. 8.

Text is entered similar to the method used for entering text messages on a

cellular phone.

When a letter or number has been entered, the cursor automatically

advances to the next character position after the specified time out or by

pressing the cursor right.

Also the cursor up/down can be used to enter alphanumeric information.

When finished, press the

OK key to confirm the entry.

Move to the left panel.

✓

MODEON/OFF

Ambilight

DVD/R TV VCR AUX

123

456

789

‡

†

VIEW

- FAVORITES -

SELECT

DEMO

SAT

BROWSE

MOT

TUVPQRS WXYZ

JKLGHI MNO

ABC

DEF

1 <space>

- 1 <space>

- 1 (etc.)

2abcABC2 abc(etc.)

3def DE F3def (etc.)

4ghi GHI4ghi (etc.)

5jkl JKL5jkl(etc.)

6mnoMNO6mno(etc.)

7 pqrsPQRS7pqrs(etc.)

8tuvTUV8tuv(etc.)

9wxyzWXYZ9 wx yz(etc.)

0.@0.@ 0(etc.)

RC key Default Multi-tap Alphanumeric entry order

RC_CURSOR_UP a b c d . ..A B C D ... 1 2 3 ... 0 <space> _ - . @

RC_CURSOR_DOWN @ . - _ <space> 0 9 8 7 ... Z Y X ... z y x ... c b a

Key Default

RC_CURSOR_UP/RC_CURSOR_DOWN

Alphanumeric

Entry Order

Access and view multimedia content from memory devices and from your PC

Television

Multimedia

TV channels

USBDevice1

USBDevice2

PC John

PC Study

The Demo menu allows the user to get an idea of the features that are part of

the television.

& Select Demo in the Settings menu and press the cursor right.

é Highlight a desired demo with cursor up/down.

“ Press OK to start playing the highlighted demo.

Note:The selected demo is played once.

Press the red colour key to exit the demo and to return to TV mode.

Note:The demos require no user interaction except for starting the demo.

Demo

How to navigate through the Settings menus

The Settings menu allows you to access and change settings and

preferences.

•Press the

MENU key on the remote control to summon the Settings menu.

- On the left panel the highlight can be set on a menu item with the cursor

up/down.

The right panel shows the content of the highlighted menu item in the left

panel.

Note: Sometimes not all the menu items are visible on the screen. Use the cursor

down to reveal all items.

- Use the cursor right to enter the right panel.

The content of the right panel is moved to the left panel and the right

panel shows the content of the newly highlighted item in the left panel.

Note: In some cases it is important that the picture can be watched while

adjusting the settings. This means that when the highlight is on the right side

panel, the other menu items hide away. When cursor left is pressed again, the

hidden menu items re-appear and the highlight moves to the left panel.

•Press the cursor left to go one menu level up again.

-Press the

OK key on the highlighted item to activate and to dismiss the

menu.

-Press the

MENU key again to exit the Settings menu.

Note:The menu is also dismissed by pressing one of the colour keys (if present)

referring to certain actions which may be executed.

Introduction

A lot of guiding instructions, help texts and messages will be displayed on your TV when using the menus or when trying to execute

an action.

Please, follow the instructions and read the help text which are being displayed on the specific item highlighted.

The colour keys refer to different actions which may be executed depending on the activated peripheral equipment. Press the

corresponding colour key on the remote control to perform the required action.

To use the menus

Settings

Setup

Installation

Demo

Exit

Demo

Picture

Sound

Ambilight

Features

Info

Settings

Picture

Sound

Ambilight

Features

Picture

Personalisation tool

Smart picture

Contrast

Brightness

Colour

Sharpness

Tint

......

Info

Settings

Setup

Installation

Demo

Exit

Demo

Ambilight

Personalisation tool

Pixel Plus 2

Active Control

Info

It is possible that the cable company or the TV channel

displays a broadcast selection menu. Layout and items are

defined by the cable company or the TV channel. Make

your choice with the cursor and press the

key.

Searching for and storing TV channels is done channel by

channel.

You must go through every step of the Manual

Installation menu.

Store TV channels

After language and country are set correctly, you can now search for and store

the TV channels in two different ways: using Automatic Installation or Manual

Installation (tuning-in channel by channel, see further).

Automatic installation

& Select Automatic installation in the Installation menu.

Note: All channels must be unlocked in order to autoprogram. If requested, enter

your code to unlock all channels. (See TV, Features menu, Childlock, p. 17.)

é Press the cursor right to enter the Automatic installation.

The autoprogramming option label

Start now appears.

“ Press the OK key.

‘ Press the green key Start to start autoprogramming.

The menu screen disappears and the progress of autoprogramming is

displayed.

If a cable system or a TV channel which broadcasts ACI (Automatic Channel

Installation) is detected, a programme list appears.Without ACI broadcast,

the channels are numbered according your language and country selection.

You can use Reshuffle to renumber them. See p. 9.

Manual installation

& Select Manual installation in the Installation menu.

é Use the cursor right to enter the Manual installation menu.

“ Select Selection mode.

Select either the frequency band, the C-channel option for aerial channels

or the S-channel option for cable channels.

‘ Press the cursor down to select System.

Select your country or part of the world where you are now located.

( Press the cursor down to select Channel.

Enter or select the number where you would like to store the TV channel.

§ Press the cursor down to select Search.

The frequency or the C- or S-channel number increases until the TV

channel is found.

Note: If you know the frequency, the C- or S-channel number, enter the 3 or 2

digits of the frequency or the channel number directly with the digit keys 0 to 9

(e.g. 048).

è Press the cursor down to select Fine tune.

Adjust the frequency with the cursor up/down in case of poor reception of

the channel found.

! Press the cursor down to select Store.

Press the cursor right and store the channel found with the OK key.

Repeat steps

( to ! to search for another TV channel.

Select the menu language and country

& Press the MENU key on the remote control.

é Use the cursor down to select Installation in the Settings menu.

“ Use the cursor right to enter the Installation menu.

‘ Select Language and enter the list of available languages with the cursor

right.

( Select your language with cursor up/down and press the OK key to confirm

your selection.

§ Select Country with the cursor up/down and enter the list with the cursor

right.

Select the country where you are now located and press the

OK key.

è Proceed with the Installation menu.

Installation

Settings

Setup

Installation

Demo

Exit

Installation

Language

Country

Automatic installation

Manual installation

Reshuffle/Rename channels

Preferred channels

Manual network installation

Software upgrade

Info

Installation

Manual installation

Selection mode

System

Channel

Fine tune

Store

Info

Settings

Installation

Language

Country

Automatic installation

Manual installation

Reshuffle/Rename chan

Preferred channels

Manual network installation

Software upgrade

Reshuffle/Rename channels

You can change the order of the stored TV channels.

It is also possible to change the name stored in the memory or to assign a

name to a TV channel or external for which a name has not yet been

entered.A name with up to 5 letters or numbers can be given to the

programme number 0 to 99 and to the externals.

& Select Reshuffle/Rename channels in the Installation menu.

é Press the cursor right.A channel list appears.

“ Select the TV channel you want to reshuffle or to rename with the cursor

up/down.

Reshuffle

& Press the green colour key on your remote control.The highlight is on the

selected TV channel you want to exchange.

é Select the new number you want to exchange the channel with the cursor

up/down.

“ Press the green colour key on your remote control to swap the reshuffled

channel with the currently highlighted channel.

Note: Press the red colour key to cancel the reshuffling action.

‘ Repeat to reshuffle other TV channels.

Rename

& Press the red colour key on your remote control.The highlight is on the

selected TV channel you want to rename.

é Select the characters with the cursor up/down or with the alphanumeric

keys on the remote control.

“ Select the following position with the cursor right.

‘ Enter a new character.

( Press the green colour key or the OK key when finished.

Notes:

- Press the yellow colour key to delete all characters. The cursor will be positioned

at the beginning.

- Press the blue colour key to delete the character the cursor is positioned. Enter a

new character with the cursor up/down.

-Space, numbers and other special characters are located between Z and A.

§ Select another channel number and repeat steps é to ( to do another

renaming.

Preferred channels

After leaving the Installation, you can browse through the TV channels with

the

-P+ key. Only those channels which are in the preferred list, will be

displayed. In this menu you can select which channels will be part of the

preferred list.

& Select Preferred channels in the Installation menu.

é Press the cursor right to display the list of stored TV channels.

“ Press the cursor up/down to select a TV channel you want to skip from the

preferred list.

‘ Press the OK key to confirm.

( Repeat for every channel you want to make non-preferred.

Reshuffle channels

Channel name

...............

Channel name

Info

Settings

Installation

Language

Country

Automatic installation

Manual installation

Reshuffle/rename channels

Preferred channels

Manual network installation

Software upgrade

Preferred channels

Channel name

...............

Channel name

Info

Settings

Installation

Language

Country

Automatic installation

Manual installation

Reshuffle/rename channels

Preferred channels

Manual network installation

Software upgrade

Network installation

See the supplied separate Connected Planet guide for further explanation of

this functionality.

Software upgrade

This menu allows you to upgrade your TV software using a USB device or

Memory Card device.

USB device/Memory Card upgrade

It is possible to initiate an upgrade procedure from a USB device or

Memory card device before starting up the TV.The memory device must be

filled with the appropriate upgrade image (and structure) which can be

found on the www.philips.com/support website.

How to upload a new software version on your memory device,

see Annex 1, p. 37.

Software upgrade

Current software info

Local upgrades/applications

Info

Settings

Installation

Language

Country

Automatic installation

Manual installation

Reshuffle/rename channels

Preferred channels

Manual network installation

Software upgrade

Current software info

Local upgrades/applications

Info

Settings

Installation

Language

Country

Automatic installation

Manual installation

Reshuffle/rename channels

Preferred channels

Manual network installation

Software upgrade

This menu is used to control the settings of special TV functions, features and

peripheral equipment.

The

Preferences menu allows you to change settings that will typically be

accessed only occasionally.

The

Source menu allows you to select a source.

The

Decoder menu allows you to define one or more programme numbers as

decoder programme numbers.

Preferences

& Press the MENU key.

é Select Setup with the cursor down and press the cursor right to select the

Preferences menu.

“ Press the cursor right again to select Picture/sound preferences.

‘ Press the cursor right once more to enter the Picture/sound preferences

menu.

Picture/sound preferences

PIP format

This menu allows you to select the preferred format (PIP or Dual screen)

which can then be displayed toggling the b key on the remote control

On or Off.

& Select PIP format.

é Press the cursor right.

“ Select PIP or Dual screen with the cursor up/down.

See Use of the remote control, p. 5.

Auto surround

Sometimes the broadcaster transmits special signals for Surround sound

encoded programmes.The TV automatically switches to the best surround

sound mode when

Auto surround is switched On.

Features preferences

Teletext 2.5

Some broadcasters offer the opportunity to see more colours, other

background colours and nicer pictures in the teletext pages.

& Select Teletext 2.5 in the Features preferences menu.

é Press the cursor right to select Teletext 2.5 On or Off.

“ Select Teletext 2.5 On to take advantage of this feature.

Select Teletext 2.5 Off if you like the more neutral teletext layout.

The selection made is valid for all channels which broadcast Teletext 2.5.

Note: It may take a few seconds before teletext broadcast switches over to

Teletext 2.5.

Setup menu

Settings

Setup

Installation

Demo

Exit

Setup

Preferences

Source

Decoder

Info

Settings

Setup

Preferences

Source

Decoder

Preferences

Picture/sound preferences

Features preferences

Menu preferences

Factory settings

Info

Settings/Setup

Preferences

Picture/sound preferences

Features preferences

Menu preferences

Factory settings

Picture/sound preferences

PIP format

Auto surround

Info

Settings/Setup

Preferences

Picture/sound preferences

Features preferences

Menu preferences

Factory settings

Features preferences

Teletext 2.5

Info

Menu preferences

OSD

& Select OSD.

é Press the cursor right to select Normal or Minimum.

Normal to activate the continuous display of the channel number (for 10

minutes) and extended display of TV channel and programme information

on screen. E.g. information on the main or auxiliary programme, input signal

quality of connected peripheral equipment, the display format and sound

mode.

Minimum to activate the display of reduced channel information.

See Use of the remote control, p. 4, i Display information.

Programme title

& Select Programme title.

é Press the cursor right to select Programme title Yes or No.

When selected

Ye s, after the selection of a TV programme or after pressing

the i key on the remote control, a TV channel may transmit the name of

the TV channel or the programme title.

When selected

No, the programme title will only appear after pressing the

i key and not after the selection of a TV channel.

Set/Change code

& Select Set or Change code in the Features preferences menu with the

cursor down.

é If no PIN-code exists yet, the menu item is set to Set code.Follow the

instructions on screen.

If a PIN-code has previously been entered, the menu item is set to

Change

code

.Follow the instructions on screen.

All number combinations from 0000 tot 9999 are valid numbers.

“ The Features preferences menu reappears with a message confirming

that the PIN has been created.

Factory settings

This function allows you to reset most of the picture and sound settings to

their predefined factory states.

& Select Factory settings with the cursor down.

é Press the cursor right.

“ Press the OK key to erase settings and reset them to their default values.

Important:You have forgotten your code !

& Select Change code in the Features preferences menu and press OK.

é Press the cursor right and enter the overriding code 8-8-8-8.

“ Press the cursor again and enter a new personal 4-digit code.The previous

code is erased and the new code is stored.

Settings/Setup

Preferences

Picture/sound preferences

Features preferences

Menu preferences

Factory settings

Menu preferences

OSD

Programme title

Set/Change code

Info

Decoder

If a decoder or a descrambler is connected, see p. 24, you can define one or

more channel numbers as decoder channel numbers.

& Select Decoder in the Setup menu.

é Press the cursor right to select Channel.

“ Select the channel number under which you have stored the programme

coming from your decoder.

‘ Select Status.

• Select the input used to connect your decoder:

None, EXT1 or EXT2.

• Select

None if you do not want the selected channel number being

activated as a decoder channel number.

Note: Select

EXT2 when the decoder is connected to your EasyLink recorder.

Source

This menu allows you to select the peripheral equipment you have connected

to the external inputs/outputs.

& Select Source in the Setup menu.

é Press the cursor right.

“ Select the input to which the peripheral equipment is connected.

‘ Press the cursor right again to enter the list of types of peripherals

connected to the selected input.

( Select the peripheral equipment with the cursor up/down.

When you select

EXT1, EXT2, EXT3, EXT4, DVI, HDMI or Side,a list

appears allowing you to identify which type of peripheral equipment is

attached to this input.The TV detects the presence of the connected

peripheral equipment and the signal is routed appropriately.

Digital Audio

Select

Digital Audio In 1 or 2 when the TV expects digital audio for a

connected peripheral equipment to come from a Digital audio input.

Make your selection of the source to which the peripheral equipment with

digital audio input has been connected.

In addition to accepting audio input via Digital Audio In, the TV can output

encoded Dolby Digital audio via the

DIGITAL AUDIO OUT connector to

an external amplifier or receiver. If your amplifier or receiver has a

matching connector for Digital Audio In, you can connect it with a single

cable to the TV’s

DIGITAL AUDIO OUT.

See Connect Peripheral Equipment, Digital MultiChannel Surround Receiver,

p. 27.

Settings

Setup

Preferences

Source

Decoder

Source

EXT1

EXT2

EXT3

EXT4

DVI

HDMI

Side

Digital Audio In 1

Digital Audio In 2

Info

Settings

Setup

Preferences

Source

Decoder

Channel

Status

Info

Press the MENU key on the remote control to summon the Settings menu.

The TV menu gives you an overview of the menus you can select.

Note: Depending on the input signal, one or more menu items may not be selectable.

Picture menu

Note: Some menu items are not available in case of HD sources.

& Press the cursor right to select Picture.

é Press the cursor right again to enter the Picture menu.

“ Select the menu items with cursor up/down.

‘ Press the cursor right again.

( Adjust the settings with the cursor left/right. Select a submenu item with

the cursor up/down.

Personalisation tool

The

Personalisation tool helps you to come to a personal picture setting.

This is done by presenting a series of several adjustment screens each

having split screens. Each time you have to select the most preferred side of

the screen. Finally a full screen appears with all the settings selected.

Note:The Personalisation tool will not alter the presence of behaviour of other

picture setting options, except that it overwrites the Personal settings of Smart

picture.

& Select Personalisation tool and press the cursor right.

é A welcome screen appears followed by several adjustment screens.

“ With the colour keys, each time select your preferred setting on the left or

right screen side.

‘ Finally press the green colour key to store your selected settings.

Smart picture

Select

Smart picture to display a list of predefined picture settings, each

corresponding with specific factory settings.

Personal refers to the personal preference settings of picture in the

picture menu.

Note:This Philips TV has been set at the factory to look best in bright shop

environments which typically use fluorescent lighting. As your home will likely not be

as well lit as a shop, we recommend that you cycle through the various smart

picture modes to find the one that best suits your own viewing conditions. Most

consumers will find that

Natural is the correct choice.

Contrast

This will adjust the intensity of bright parts in the picture but keep the dark

parts unchanged.

Brightness

This will adjust the light output of the complete picture, which will mainly

affect the darker areas of the picture.

Colour

This will adjust the saturation level of the colours to suit your personal

preference.

Sharpness

This will adjust the sharpness of fine details in the picture.

Tint

This will increase or decrease

Warm (red) and Cool (blue) colours to suit

personal preferences.

Select

Cool to give the white colours a blue, Normal to give the white

colours a neutral,

Warm to give the white colours a red tint.

TV menu

Settings

Setup

Installation

Demo

Exit

Demo

Picture

Sound

Ambilight

Features

Info

Settings

Picture

Sound

Ambilight

Features

Picture

Personalisation tool

Smart picture

Contrast

Brightness

Colour

Sharpness

Tint

.....

Info

Digital options

Pixel Plus 2 is the most ideal setting, as it fully processes the image to

make every single pixel the best it can be, improving contrast, sharpness,

picture depth, and colour reproduction and brilliance from every source,

including High Definition.

For the most optimum motion reproduction of all source materials, select

the

Movie Plus setting.

Standard mode is recommended only for very noisy or poorly mastered

sources or for those who find the smoothness of Pixel Plus 2 unsettling.

Dynamic contrast

Automatically makes the contrast in the darker and the brighter picture

areas more noticeable as the image on the screen changes.

Normally select

Medium. It may be preferred to select Minimum,

Maximum or Off.

& Press the cursor right to enter the list.

é Select one of the settings with cursor up/down.

“ Press the cursor left to return to the picture menu.

DNR (Digital Noise Reduction)

Automatically filters out and reduces the image noise and improves picture

quality when receiving weak video signals.

& Press the cursor right to enter the list.

é Select Off, Minimum, Medium or Maximum according to the image

noise.

“ Press the cursor left to return to the picture menu.

Colour enhancement

When activated, this feature automatically controls green enhancement and

blue stretch. It makes the colours more vivid.

& Press the cursor right.

é Select On or Off in order to activate/de-activate Colour enhancement with

the cursor right.

Hue

This compensates for the colour variations in NTSC encoded

transmissions.

Picture format

This menu item performs the same as the q key on the remote control.

See Use of the remote control, p. 5.

Active Control

The TV continuously measures and corrects all incoming signals in order to

provide the best picture possible.

It also uses a sensor which monitors the ambient light conditions in the

room and adjusts key picture settings for best viewing.

When Active Control is set to Maximum, the brightness, the contrast and

the colour of the Ambilight shall be influenced by the light sensor.

When Active Control is set to Medium, only the colour of the Ambilight

shall be influenced.

& Select Active Control.

é Press the cursor right to enter the list of Active Control values.

“ Press the cursor up/down to select the Active Control values Off,

Minimum, Medium or Maximum.

The picture settings are being optimised continuously.Those menu items

can not be selected.

‘ Press the OK key or wait for the time out to dismiss the Active Control

display.

Settings

Picture

Sound

Ambilight

Features

Picture

.....

Digital options

Dynamic contrast

DNR

Colour enhancement

Hue

Picture format

Active Control

Info

Sound menu

& Select Sound in the TV Settings menu.

é Press the cursor right to enter the sound menu.

“ Select the menu items with cursor up/down.

‘ Press the cursor right.

( Adjust the settings with cursor keys.

Remember, control settings are at normal mid-range levels when the bar

scale is entered.

Smart sound

Select

Smart sound to display a list of predefined sound settings, each

corresponding with specific factory settings of Treble and Bass.

Press the cursor right to enter the list.

Press the cursor up/down to select a predefined sound setting.

Personal refers to the personal preference settings of sound in the sound

menu.

Note:The moment you are in a predefined Smart sound setting and you modify a

setting in the Sound menu, all values of the menu will overwrite the previously

made personal setting.

Volume

This will adjust the sound output level.

Balance

This will adjust the output of the right and left speakers to obtain the best

stereo reproduction for your listening position.

Headphone volume

This controls the level of sound through the headphones.

Surround mode

This selects the modes for more spatial or surround sound reproduction

dependent on the broadcast signals or signals from external inputs

received.

Dual I/II

This will select, per channel,

Language I or Language II, when dual sound

transmission is available.

Mono/Stereo

This selects, per TV channel, Mono or Stereo sound when analog stereo

broadcasts are available.

AVL (Automatic Volume Leveler)

This automatically reduces the volume differences between channels and

programmes, providing a more constant overall level.This will also reduce

the dynamics of sound.

Delta volume

This allows you to correct for any permanent volume differences between

TV channels or external sources.

Settings

Picture

Sound

Ambilight

Features

Sound

Smart sound

Volume

Balance

Headphone volume

Surround mode

Dual I-II

Mono/Stereo

AVL

Delta volume

...............

Info

Features menu

& Select Features in the TV Settings menu.

é Press the cursor right to enter the Features menu.

“ Select the menu items with cursor up/down.

‘ Press the cursor right.

( Adjust the settings with the cursor up/down.

Select subtitles

The subtitle page must be stored for each TV channel.

Switch on teletext and select the proper subtitle page from the index.

Switch off teletext.

Subtitle On will automatically display them on the selected TV channels if

subtitles are in the transmission.A symbol will indicate that the mode is on.

Select

On during mute when you want to have the subtitles automatically

displayed only when the sound has been muted with the ¬ key on the

remote control.

Sleeptimer

This sets a time period after which the TV automatically switches to

standby.

& Select Sleeptimer.

é Press the cursor right.

“ Select a value with the cursor up/down.The list will have values from 0 to

180 minutes.

When

0 is selected, the sleeptimer is switched off.

You can always switch off your TV earlier or select another time set.

Child lock

& Select Child lock in the Features menu.

é Press the cursor right to enter the Child lock menu.You’re summoned to

enter your code.

Note:You have to re-enter your code each time you enter the child lock menu.

Important:You have forgotten your code ! See p. 12.

“ Select one of the menu items of the Child lock menu:

•

Lock to lock all channels and externals.

•

Custom lock and press the cursor right.

Select:

Lock after to lock all programmes from a certain time onwards.

Press the cursor right and enter the time with the cursor up/down and

right. Select

On with the cursor right to set the lock.

Channel lock to lock a certain TV channel or external.

• Select

Unlock to disable all locks you have set.

On timer

From standby, this automatically switches the TV to the specified

programme number, at the specified time.

& Select On timer in the Features menu.

é Press the cursor right to enter the On timer menu.

“ Select Timer and press the cursor right.

‘ Select On.

( Select Channel and then the TV channel you want your TV to switch to on

a selected time and day.

§ Select Day and then a day of the week or select Daily.

è Select Time and enter the time with the digit keys or with the cursor

up/down.

! Press the OK key to activate.

ç Press the MENU key to switch off the menu.

Notes:

- To check your timer settings, press the i key.

- Only one On timer can be set.

Settings

Picture

Sound

Ambilight

Features

Subtitle

Sleeptimer

Childlock

On timer

Info

Settings

Features

Subtitle

Sleeptimer

Childlock

On timer

Childlock

Lock

Custom lock

Unlock

Info

Settings

Childlock

Lock

Custom lock

Unlock

Custom lock

Lock after

Channel lock

Info

Settings

Features

Subtitle

Sleeptimer

Childlock

On timer

Timer

Channel

Day

Time

Info

Smart colour modes:

•

Personal: Select any colour or hue to match to

your personal taste, e.g. your interior, the

programme content (sports, movie, etc.), the

mood you are in, etc.

•

Warm white:The colour is matched to that of

most normal lightbulbs. Select this setting if you

want the Ambilight to fit best with normal living

room lighting.

•

Cool white:The colour is matched to that of

normal daylight (6500K). Select this setting if

you prefer more cool lighting.

Note: the 6500 K is the SMPTE recommended

setting for ambient backlighting of displays.

•

Blue:The blue colour is preferred by most

consumers to create a cool, modern and /or

mystical atmosphere. Select this setting

according to your personal taste or mood.

Ambilight menu

Ambilight is an innovative lighting concept using light with fully adjustable

colours at the back of the TV to enhance the viewing experience.Analysis of

the picture content adapts the colours continuously, or the lights can be set to

any fixed colour and many shades of white.Ambilight creates the ideal viewing

environment for your TV resulting in improved relaxed viewing, improved

perceived picture detail, contrast and colour.

In standby mode the lights can be set/operated to any colour and create a

unique ambiance in the room.

& Select Ambilight in the TV menu.

é Press the cursor right to enter the Ambilight menu.

“ Select Ambilight and press the cursor right to select Off or On.

•

Off: will switch off the ambient lights and downlight all other ambilight

menu items.

•

On: the ambient lights will be on. Refine the light settings in the menus

below.

‘ Select Brightness to adjust the light output of the ambient lights.

( Select Mode and press the cursor right to select Colour, Ambience,

Relaxed, Movie or Action.

•

Colour: this will show constant light according to the settings in the

Ambilight colour menu. See below.

• The options

Ambience, Relaxed, Movie and Action will dynamically

match brightness and colour to the screen content.

The mode selection made will effect the speed and/or saturation and/or

intensity which determines the viewing impression.

E.g. in

Relaxed mode, the rate of brightness and colour change is

smoothly and soft which gives you a more immersive yet relaxed viewing.

Ambience is the rate of brightness and colour change as predefined in

the factory.

Movie will influence the perception of a movie whereas Action mode will

influence the dynamic impression.

Notes:

- The rate of change is limited, as not to cause uncomfortable sensations.

- According to the selection made, some Ambilight menu items will be downlighted

and can not be selected.

§ In case Colour has been selected in the Mode menu:

• Select

Colour in the Ambilight menu and press the cursor right.

• Select

Smart colour and then select Personal, Warm white, Cool

white

or Blue.

• Select

Palette to select the general colour of the light output.

• Select

Saturation to adjust the colourfulness of the light.

Notes:

- Adjusting the Palette and/or Saturation settings will set the colour mode to

Personal.

- The selected colour mode will be the one used when turning on the ambient

lights from standby mode.

è In case Ambience, Relaxed, Movie or Action has been selected in the

Mode menu:

• Select

Separation in the Ambilight menu and press the cursor right.

• Select

Off for a mono behaviour which means that all lamps will behave

equally.

• Select

Minimum, Medium or Maximum to define the Ambilight stereo

effect over the available lamps.

! Select Balance and use the cursor left/right to adjust and generate any

colour and level of light intensity on the left and right side of the picture to

perfectly match your room setup.

Ambilight in Standby mode

When the TV is switched off, the ambient lights will also be switched off.

When the TV is in standby mode, ambilight can be used to provide a unique

ambience for the room. Press the

AMBILIGHT ON/OFF key on the

remote control (see p. 4) to switch between Ambilight Off or On.

Note: Infrared interference

To avoid bad infrared remote control reception, place your peripheral

equipments out of sight of the ambient lights of your TV.

Note: Ambilight does not function well when the room temperature is less than

59°F/15°C.

Settings

Picture

Sound

Ambilight

Features

Ambilight

Brightness

Mode

Colour

Separation

Balance

Info

Settings

Ambilight

Brightness

Mode

Colour

Separation

Balance

Mode

Colour

Ambience

Relaxed

Movie

Action

Info

Settings

Ambilight

Brightness

Mode

Colour

Separation

Balance

Colour

Smart colour

Palette

Saturation

Info

The Multimedia browser lets you display pictures and/or movies or play audio

files stored on a USB device or a memory card.

The Multimedia browser application is invoked from the Browse menu (press

the = key) by selecting a device and pressing the cursor right.

Your TV is also equipped with the possibility to connect to your computer or

home network and to access and view your personal multimedia files. See the

supplied separate Connected Planet guide for further explanation of this

functionality.

Notes:

- Following types of memory cards can be read:

Compact Flash I & II, Memory stick, Memory stick PRO, SD Card/Mini SD Card,

Smart Media, Micro Drive, MultiMedia Card.

- Following file formats can be reproduced (See also Annex 5 : Supported file formats

in the supplied separate Connected Planet Guide):

• For pictures: JPEG

• For audio: MP3, MP3 Pro

• For video: MPEG1, MPEG2, MPEG4, DIVX and XVID files

- Only FAT/DOS-formatted memory devices are supported.

- If your digital camera is not supported, try one of the following solutions:

• Make sure your camera is switched on and verify if its configuration settings are

correct (see the manual of your camera).

• Remove the memory card from your camera and insert it in the memory card

slot. Refer to www.philips.com/support for more information.

-Philips cannot be responsible if your USB device or memory card is not supported.

Card data protection

• Do not remove the card/USB device when the content is being read or

when browsing. Such action may damage the memory card/USB device.

• Do not touch the terminals on the back of the card.

•Always insert a card in the correct direction. Failure to do so may result in

damage to the card and the unit.

• Do not subject the card to excessive pressure or strong impacts.

• Malfunctions of the unit or card may result in data loss or damage to the

card.

• Philips shall not accept any liability for damage or loss of stored data.

Warning:

Memory cards can be swallowed by young children. Do not allow

children to handle memory cards. Please, remove the memory card

immediately after use.

Compact Flash I & II /

Micro Drive

Memory Stick

Smart Media

Card

MultiMedia Card /

SD Card

Viewing content from a Memory card / USB device

Inserting a memory card / USB device

Note: Memory cards or USB devices are not supplied with this TV.

Insert a memory card in one of the cardslots at the right side of the TV.

Insert it to be clicked in.

In case of a memory stick or a digital camera, connect it to one of the USB2.0

connectors.

When a memory card or a USB device is inserted, the Multimedia menu is

displayed automatically, see further.

Removing the memory card / USB device

& First switch off the Browse menu.To do so press the = key on the

remote control.

é Remove the memory card/USB device.

Multimedia Browser

Television

Multimedia

TV channels

USBDevice1

USBDevice2

PC John

PC Study

Following icons may appear:

folder

pictures

music

self made playlist/album

video

Function keys at the bottom of the screen

Details to display a description of the selected file or directory;

Transitions to select if a transition during a slide show should be

applied;

Slide time to select the duration a picture will be displayed in a

slide show;

Rotate to rotate a picture;

Repeat one/all to repeat the playback of a music file;

Shuffle to shuffle music collections in a random way;

Zoom to select one of the zoom magnifications (x1, x2, x4)

with the cursor keys up/down.

Additionally you can shift the selected zoom window

over the screen with the cursor keys.

Full/small screen to toggle between a full or a small screen.

Note:To rotate a picture or to select one of the zoom magnifications, first stop the

slideshow with the OK key or the blue colour key.

Other function keys on the remote control

‡ to stop displaying content;

º to pause displaying content;

π to play a single file, start a slide show, playback of a

folder or other collection.

† to fast forward displaying content

Ò to fast rewind displaying content

Notes:

•Your TV supports slide shows with

background music. See Annex 2, p. 39.

• The playback will continue to play even if

temporarily switched to browser screens. The audio

will be stopped when another song starts playing, or

when the end has been reached.

• The length of the files should not exceed 128

characters..

•More technical remarks can be found in Annex 3,

p. 41.

Multimedia Browser menu

& Insert a USB device or memory card.

é Select the USB device or memory card under Multimedia with the cursor

up/down.

The Multimedia browser will allow the user to browse content stored on

the inserted USB device or memory card.

Press the cursor right.

“ The 2-panel browser will be shown with the left panel containing the

content types (Music, Pictures,Video).

The right panel will display the content that is available of the selected

content type.

‘ Press the cursor up/down to select a content and press the cursor right to

enter the content.

( Press the cursor up/down to select a file or a directory.

Note: Press the green colour key to display all the image files in the current

directory as thumbnails when browsing pictures. Press the green key again to

display the image files in a list.

§In case a file is selected, press the OK key to display a picture file or to

play a video or an audio file.

In case a directory, album or playlist is selected, press the cursor right to

enter the content or press the

OK key to start a slide show or a loop

playback of the files present in the directory, album or playlist.

èPress the cursor left to keep music playing and switch back to the

Multimedia menu.

!Press one of the colour keys on the remote control to perform the

corresponding function mentioned at the bottom of the screen.

Note:The blue colour key can, if necessary, be used to let the colour keys

re-appear.

ç To stop playing content, press the ‡ key on the remote control.

Picture

London2005

The Beatles

Xmas2004.alb

arnold.jpg

eagle.jpg

USBDevice1

Music

Picture

Movies

London2005pic001.jpg

pic001.jpg

pic002.jpg

pic003.jpg

pic004.jpg

USBDevice1

Picture

London2005

The Beatles

Xmas2004.alb

arnold.jpg

pic001.jpg

USBDevice1/Picture/London2005

London2005

pic001.jpg

pic002.jpg

pic003.jpg

pic004.jpg

pic001.jpg

USBDevice1/Picture/London2005

London2005

Press OK to play.

pic001.jpg

1024:768

List

Pre

Viewing content via PC link

The PC link provides easy access to your personal multimedia files.You get

access to digital pictures, video and music files on your PC. How to access

your personal digital content, see the supplied separate Connected Planet

guide.

Page is loading ...

New Transducers 42PF9830/10 User manual

Brand: New Transducers

Model: 42PF9830/10

Category: LCD TVs

Type: User manual

Download PDF

report

New Transducers 42PF9830/10 User manual

New Transducers 42PF9830/10 User manual

Related papers

Other documents